EN ISO 5978:2023

Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO 5978:2023)

This document specifies a method for the determination of the resistance of rubber- or plastics-coated fabric sheets to blocking when left in contact for specified temperature, time and pressure.

Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung des Blockwiderstandes (ISO 5978:2023)

Dieses Dokument legt ein Verfahren zur Bestimmung der Widerstandsfähigkeit von gummi- oder kunststoffbeschichtetem Gewebefolien gegen Blocken fest, wenn diese bei festgelegter Temperatur, festgelegter Zeit und festgelegtem Druck in Kontakt gebracht werden.
WARNUNG — Anwender dieser Norm sollten mit der üblichen Laborpraxis vertraut sein. Dieses Dokument erhebt nicht den Anspruch, dass alle mit ihrer Anwendung verbundenen Sicherheitsprobleme, wenn überhaupt, angesprochen werden. Es liegt in der Verantwortung des Anwenders, geeignete Sicherheitsvorkehrungen und Gesundheitsschutzmaßnahmen zu treffen sowie vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance au blocage (ISO 5978:2023)

Le présent document spécifie une méthode de détermination de la résistance au blocage des supports textiles en feuilles revêtus de caoutchouc ou de plastique lorsqu’ils sont laissés en contact dans des conditions spécifiées de température, de temps et de pression.

Gumirane ali plastificirane tekstilije - Ugotavljanje odpornosti proti zlepljenju in luščenju (ISO 5978:2023)

Ta dokument določa metodo za ugotavljanje odpornosti gumiranih ali plastificiranih tekstilij proti zlepljenju in luščenju, če so nekaj časa v stiku pri določeni temperaturi in pod pritiskom.

General Information

• Status: Published
• Publication Date: 05-Sep-2023
• ICS: 59.080.40 - Coated fabrics
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248/WG 4 - Coated fabrics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Sep-2023
• Completion Date: 06-Sep-2023
• Ref Project: SIST EN ISO 5978:2023 - Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO 5978:2023)

Relations

• Replaces: EN 25978:1993 - Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO 5978:1990)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Gumirane ali plastificirane tekstilije - Ugotavljanje odpornosti proti zlepljenju in
luščenju (ISO 5978:2023)
Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO
5978:2023)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung des
Blockwiderstandes (ISO 5978:2023)
Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance
au blocage (ISO 5978:2023)
Ta slovenski standard je istoveten z: EN ISO 5978:2023
ICS:
59.080.40 Površinsko prevlečene Coated fabrics
tekstilije
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 5978
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 59.080.40 Supersedes EN 25978:1993
English Version
Rubber- or plastics-coated fabrics - Determination of
blocking resistance (ISO 5978:2023)
Supports textiles revêtus de caoutchouc ou de Mit Kautschuk oder Kunststoff beschichtete Textilien -
plastique - Détermination de la résistance au blocage Bestimmung des Blockwiderstandes (ISO 5978:2023)
(ISO 5978:2023)
This European Standard was approved by CEN on 8 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5978:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 5978:2023) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile
products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2024, and conflicting national standards shall
be withdrawn at the latest by March 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 25978:1993.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5978:2023 has been approved by CEN as EN ISO 5978:2023 without any modification.

INTERNATIONAL ISO
STANDARD 5978
Third edition
2023-08
Rubber- or plastics-coated fabrics —
Determination of blocking resistance
Supports textiles revêtus de caoutchouc ou de plastique —
Détermination de la résistance au blocage
Reference number
ISO 5978:2023(E)
ISO 5978:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 5978:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
5 Time between manufacture and testing . 2
6 Samples and test pieces . 2
7 Conditioning of test pieces .2
8 Procedure .3
9 Test report . 3
iii
ISO 5978:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof
...