Method of determination of unpolished and polished slip/skid resistance value

Describes a method for determining in the laboratory the skid resistance of a product after ageing in use, including an accelerated polishing test.

Verfahren zur Bestimmung des Griffigkeitsbeiwertes vor und nach Polierung

Diese Europäische Norm beschreibt ein Laborverfahren zur Bestimmung des Gleitwiderstandswertes von unpolierten Flächen (USRV) und polierten Flächen (PSRV) von Pflastereinheiten unter Einsatz einer Flachbettpoliermaschine in Verbindung mit einem Pendelgerät.

Méthode de détermination de la valeur de résistance au dérapage/à la glissance des pavés polis ou non polis

La présente norme européenne décrit la méthode permettant de déterminer en laboratoire la résistance au dérapage d'un pavé ou d'une dalle polis, au moyen d'une machine à polir plane et d'un pendule de frottement.

Metoda določevanja vrednosti drsnosti nepoliranih in poliranih površin

General Information

Status
Withdrawn
Publication Date
28-Jan-2003
Withdrawal Date
16-Sep-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Sep-2014

Relations

Buy Standard

Standardization document
ENV 12633:2003
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 12633:2003
01-julij-2003
0HWRGDGRORþHYDQMDYUHGQRVWLGUVQRVWLQHSROLUDQLKLQSROLUDQLKSRYUãLQ
Method of determination of unpolished and polished slip/skid resistance value
Verfahren zur Bestimmung des Griffigkeitsbeiwertes vor und nach Polierung
Méthode de détermination de la valeur de résistance au dérapage/a la glissance des
pavés polis ou non polis
Ta slovenski standard je istoveten z: ENV 12633:2003
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST ENV 12633:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 12633:2003

---------------------- Page: 2 ----------------------

SIST ENV 12633:2003
EUROPEAN PRESTANDARD
ENV 12633
PRÉNORME EUROPÉENNE
EUROPÄISCHE VORNORM
January 2003
ICS 93.080.20
English version
Method of determination of unpolished and polished slip/skid
resistance value
Méthode de détermination de la valeur de résistance au Verfahren zur Bestimmung des Griffigkeitsbeiwertes vor
dérapage/à la glissance des pavés polis ou non polis und nach Polierung
This European Prestandard (ENV) was approved by CEN on 21 November 2002 as a prospective standard for provisional application.
The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the ENV can be converted into a European Standard.
CEN members are required to announce the existence of this ENV in the same way as for an EN and to make the ENV available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final
decision about the possible conversion of the ENV into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. ENV 12633:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST ENV 12633:2003
ENV 12633:2003 (E)
Contents
page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Principle.5
4 Apparatus .5
5 Sampling.8
6 Determination of the unpolished slip/skid resistance value (USRV).8
7 Determination of the polished slip/skid resistance value (PSRV) .8
7.1 Preparation of test specimen.8
7.2 Accelerated polishing procedure.9
7.3 Validation of polishing procedure.10
8 Test report .10
Annex A (normative)  Method for the determination of unpolished slip/skid resistance value (USRV)
and polished slip/skid resistance value (PSRV).11
A.1 Principle.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.