EN 13331-1:2002
(Main)Trench lining systems - Part 1: Product specifications
Trench lining systems - Part 1: Product specifications
This European Standard specifies the requirements for metallic trench lining systems assembled completely from prefabricated components which are all purpose made. It includes material requirements, constructional and structural requirements and quality assurance.
Grabenverbaugeräte - Teil 1: Produktfestlegungen
Diese Europäische Norm legt Anforderungen an metallische Grabenverbaugeräte fest, die vollständig aus vorgefertigten Bauteilen zusammengefügt sind. Sie enthält Anforderungen an Werkstoffe sowie konstruktive und bauliche Ausführung und die Qualitätssicherung.
Dispositifs de blindage de tranchées - Partie 1 : Spécifications du produit
La présente Norme européenne spécifie les exigences applicables aux dispositifs métalliques de blindages de tranchées entièrement assemblés à partir d'éléments préfabriqués conçus spécialement à cet effet. Elle comprend les exigences concernant les matériaux, la construction et la structure.
Pour les coefficients de sécurité partiels, se reporter à l'annexe A.
Sistemi za razpiranje izkopov - 1. del: Specifikacija proizvoda
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sistemi za razpiranje izkopov - 1. del: Specifikacija proizvodaGrabenverbaugeräte - Teil 1: ProduktfestlegungenDispositifs de blindage de tranchées - Partie 1 : Spécifications du produitTrench lining systems - Part 1: Product specifications93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground worksICS:Ta slovenski standard je istoveten z:EN 13331-1:2002SIST EN 13331-1:2002en01-december-2002SIST EN 13331-1:2002SLOVENSKI
STANDARD
SIST EN 13331-1:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13331-1August 2002ICS 93.020English versionTrench lining systems - Part 1: Product specificationsDispositifs de blindage de tranchées - Partie 1:Spécification du produitGrabenverbaugeräte - Teil 1: ProduktfestlegungenThis European Standard was approved by CEN on 6 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13331-1:2002 ESIST EN 13331-1:2002
EN 13331-1:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.54Symbols.155Designation.166Materials.176.1General.176.2Fasteners.176.3Minimum fracture elongation of cast iron.177Requirements.177.1General.177.2Minimum characteristic system resistance.187.3Deflection.187.4Attachment points for extracting, handling, pulling and connecting.207.5Struts.217.6Strut to panel or slide rail connection.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.