EN ISO 6860:1995
(Main)Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984)
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984)
Lacke und Anstrichstoffe - Dornbiegeversuch (mit konischem Dorn) (ISO 6860:1984)
Diese Internationale Norm beschreibt ein empirisches Verfahren zur Beurteilung der Widerstandsfähigkeit von Lackierungen, Anstrichen oder ähnlichen Beschichtungen gegen Rißbildung und/oder Ablösen von einem metallischen Untergrund, wenn dieser unter Normbedingungen um einen konischen Dorn gebogen wird. Bei einem Mehrschichtsystem kann jede Schicht einzeln oder das vollständige System geprüft werden.
Peintures et vernis - Essai de pliage (mandrin conique) (ISO 6860:1984)
Barve in laki - Preskus s pregibom (stožčasta os) (ISO 6860:1984)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6860:1997
01-december-1997
%DUYHLQODNL3UHVNXVVSUHJLERP VWRåþDVWDRV ,62
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984)
Lacke und Anstrichstoffe - Dornbiegeversuch (mit konischem Dorn) (ISO 6860:1984)
Peintures et vernis - Essai de pliage (mandrin conique) (ISO 6860:1984)
Ta slovenski standard je istoveten z: EN ISO 6860:1995
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 6860:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6860:1997
---------------------- Page: 2 ----------------------
SIST EN ISO 6860:1997
---------------------- Page: 3 ----------------------
SIST EN ISO 6860:1997
---------------------- Page: 4 ----------------------
SIST EN ISO 6860:1997
---------------------- Page: 5 ----------------------
SIST EN ISO 6860:1997
---------------------- Page: 6 ----------------------
SIST EN ISO 6860:1997
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.MElK~YHAPOAHAR OPrAHM3ALlMfl I-IO CTAHAAPTM3ALWlM~ORGANlSATlON INTERNATIONALE DE NORMALISATION
Paints and varnishes - Bend test (conical mandrel)
Pein tures et v&s - Essai de pliage handrin coniquel
First edition - 1984-06-01
UDC 667.613.7 : 620.177 : 620.191.33
iii Ref. No. IS0 68604984 (E)
-
paints, varnishes, tests, bend tests, apparatus.
Descriptors :
Price based on 3 pages
---------------------- Page: 7 ----------------------
SIST EN ISO 6860:1997
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 6860 was developed by Technical Committee ISO/TC 35,
Paints and varnishes, and was circulated to the member bodies in October 1982.
It has been approved by the member bodies of the following countries:
Australia ran
Romania
Belgium
South Africa, Rep. of
w
Brazil srael
Sri Lanka
Bulgaria
taly Sweden
Czechoslovakia
Jamaica Switzerland
Egypt, Arab Rep. of Yenya Thailand
France Vlexico
United Kingdom
Germany, F. R. Netherlands USSR
Hungary
Vorway
India ‘eland
expressed disapproval
The member body of the following country of the document on
technical grounds :
Canada
0 International Organization for Standardization, 1984
Printed in Switzerland
---------------------- Page: 8 ----------------------
SIST EN ISO 6860:1997
IS0 68604984 (E)
INTERNATIONAL STANDARD
Paints and varnishes -. Bend test (conical mandrel)
1 Scope and field of application
0 Introduction
This International Standard is one of a series of standards deal-
1 .I This International Standard describes an empirical test
ing with the sampling and testing of paints, varnishes and
procedure for assessing the resistance of a coating of paint,
related products.
varnish or related product to cracking and/or detachment from
a metal substrate when subjected to bending around a conical
This International Standard is one of four documents (see also
mandrel under standard conditions.
IS0 1519, IS0 1520, and ISO/TR 6272) which specify empirical
test procedures for assessing the resistance of coatings of
1.2 For a multi-coat system, each coat may be tested separ-
paints, varnishes and related products to cracking and/or
ately or the complete system may be tested.
detachment from the substrate under different conditions of
deformation.
For any particular application, the method of test described in
this International Standard needs, to be completed by the
2 References
following supplementary information. This information should
be derived, in part or totally, from the (inter)national standard
IS0 1512, Paints and varnishes - Sampling.
or other document related to the product under test or, if ap-
IS0 1513, Paints and varnishes - Examination and preparation
propriate, should be agreed between the interested parties.
of samples for testing. ,
a) Material, thickness and surface preparation of the
IS0 1514, Paints and varnishes - Standard panels for testing.
substrate (see 5.1).
IS0 1519, Paints and varnishes - Bend test (cylindrical man-
b) Method of application of the test coating to the
drel).
substrate.
IS0 1520, Paints and varnishes - Cupping test.
c) Duration and conditions of drying of the coat (or condi-
tions of stoving and ageing, if applicable) before testing.
IS0 2868, Paints and varnishes -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.