EN ISO 6860:2006

Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)

ISO 6860:2006 describes an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal substrate when subjected to bending around a conical mandrel under standard conditions.
For a multi-coat system, each coat may be tested separately or the complete system may be tested.

Beschichtungsstoffe - Dornbiegeversuch (mit konischem Dorn) (ISO 6860:2006)

Diese Internationale Norm legt ein empirisches Verfahren zum Beurteilen der Widerstandsfähigkeit von Lackierungen, Anstrichen oder ähnlichen Beschichtungen gegen Rissbildung und/oder Ablösen von einem metallischen Substrat fest, wenn dieses unter Normbedingungen um einen konischen Dorn gebogen wird.
Bei einem Mehrschichtsystem kann jede Schicht einzeln oder das vollständige System geprüft werden.

Peintures et vernis - Essai de pliage (mandrin conique) (ISO 6860:2006)

L'ISO 6860:2006 décrit une méthode d'essai empirique permettant d'évaluer la résistance d'un revêtement de peinture, de vernis ou d'un produit assimilé au craquelage et/ou au décollement d'un subjectile métallique lorsqu'il est soumis au pliage autour d'un mandrin conique dans des conditions normalisées.
Pour un système multicouche, l'essai peut être fait sur chaque couche séparément ou sur le système complet.

Barve in laki – Preskus s pregibom (stožčasta os) (ISO 6860:2006)

General Information

• Status: Published
• Publication Date: 14-Mar-2006
• Withdrawal Date: 29-Sep-2006
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Mar-2006
• Completion Date: 15-Mar-2006
• Ref Project: SIST EN ISO 6860:2006 - Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)

Relations

• Replaces: EN ISO 6860:1995 - Paints and varnishes - Bend test (conical mandrel) (ISO 6860:1984)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6860:2006
01-maj-2006
1DGRPHãþD
SIST EN ISO 6860:1997
%DUYHLQODNL±3UHVNXVVSUHJLERPVWRåþDVWDRV,62
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)
Beschichtungsstoffe - Dornbiegeversuch (mit konischem Dorn) (ISO 6860:2006)
Peintures et vernis - Essai de pliage (mandrin conique) (ISO 6860:2006)
Ta slovenski standard je istoveten z: EN ISO 6860:2006
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 6860:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6860:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 6860:2006
EUROPEAN STANDARD
EN ISO 6860
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 87.040 Supersedes EN ISO 6860:1995
English Version
Paints and varnishes - Bend test (conical mandrel) (ISO
6860:2006)
Peintures et vernis - Essai de pliage (mandrin conique) Beschichtungsstoffe - Dornbiegeversuch (mit konischem
(ISO 6860:2006) Dorn) (ISO 6860:2006)
This European Standard was approved by CEN on 14 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6860:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6860:2006

EN ISO 6860:2006 (E)





Foreword


This document (EN ISO 6860:2006) has been prepared by Technical Committee ISO/TC 35
"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and
varnishes", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2006, and conflicting national
standards shall be withdrawn at the latest by September 2006.

This document supersedes EN ISO 6860:1995.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 6860:2006 has been approved by CEN as EN ISO 6860:2006 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6860:2006


INTERNATIONAL ISO
STANDARD 6860
Second edition
2006-03-15


Paints and varnishes — Bend test
(conical mandrel)
Peintures et vernis — Essai de pliage (mandrin conique)




Reference number
ISO 6860:2006(E)
©
ISO 2006

---------------------- Page: 5 ----------------------

SIST EN ISO 6860:2006
ISO 6860:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the ad
...