EN 13860-3:2003

Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification

This European Standard identifies the functional characteristics of a general purpose eddy current system and provides methods for their measurement and verification.
The evaluation of these characteristics permits a well-defined description and comparability of an eddy current equipment.
By careful choice of the characteristics, a consistent and effective eddy current examination system can be designed for a specific application.
Where accessories are used, these should be characterised using the principles of this standard.
This standard does not give the extent of verification nor acceptance criteria for the characteristics. These are given in the application documents.

Zerstörungsfreie Prüfung - Wirbelstromprüfung - Kenngrößen von Prüfeinrichtungen und deren Verifizierung - Teil 3: Kenngrößen des Systems und deren Verifizierung

Diese Europäische Norm legt die Funktionskennwerte von Wirbelstromprüfsystemen für die allgemeine Anwendung fest und enthält Verfahren für ihre Messung und Verifizierung.
Die Bewertung dieser Kennwerte erlaubt eine verständliche Beschreibung und Vergleichbarkeit von Wirbel-stromprüfeinrichtungen.
Mit einer sorgfältigen Auswahl der Kennwerte ist es möglich, ein angemessenes und effizientes Wirbelstrom-prüfsystem für einen besonderen Anwendungsfall aufzubauen.
Zusatzeinrichtungen sollten, sofern sie eingesetzt werden, nach den Grundlagen der vorliegenden Norm charakterisiert werden.
Diese Norm enthält weder Vorschriften für den Umfang der Verifizierung noch für die Annahmekriterien der Kennwerte. Diese werden in den Anwendungsdokumenten angegeben.

Essais non destructifs - Examen par courants de Foucault - Caractéristiques et vérification de l'appareillage - Partie 3: Caractéristiques du système et vérifications

Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification

General Information

• Status: Withdrawn
• Publication Date: 09-Dec-2003
• Withdrawal Date: 14-Sep-2008
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 3 - Eddy current testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Sep-2008
• Completion Date: 15-Sep-2008
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13860-3:2004 - Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification

Relations

• Replaced By: EN ISO 15548-3:2008 - Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verificationZerstörungsfreie Prüfung - Wirbelstromprüfung - Kenngrößen von Prüfeinrichtungen und deren Verifizierung - Teil 3: Kenngrößen des Systems und deren VerifizierungEssais non destructifs - Examen par courants de Foucault - Caractéristiques et vérification de l'appareillage - Partie 3: Caractéristiques du systeme et vérificationsNon-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification19.100Neporušitveno preskušanjeNon-destructive testingICS:Ta slovenski standard je istoveten z:EN 13860-3:2003SIST EN 13860-3:2004en01-junij-2004SIST EN 13860-3:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13860-3December 2003ICS 19.100English versionNon-destructive testing - Eddy current examination - Equipmentcharacteristics and verification - Part 3: System characteristicsand verificationEssais non destructifs - Examen par courants de Foucault -Caractéristiques et vérification de l'appareillage - Partie 3:Caractéristiques du système et vérificationsZerstörungsfreie Prüfung - Wirbelstromprüfung -Kenngrößen von Prüfeinrichtungen und deren Verifizierung- Teil 3: Kenngrößen des Systems und deren VerifizierungThis European Standard was approved by CEN on 7 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13860-3:2003 ESIST EN 13860-3:2004
...