EN ISO 13995:2000
(Main)Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000)
Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000)
This European Standard specifies a test method for the determination of the resistance to puncture and dynamic tearing of protective clothing materials which are used in situations where snagging and tearing could result in unacceptable damage to the clothing or danger to the wearer through loss of integrity of a barrier.
Schutzkleidung - Mechanische Eigenschaften - Prüfverfahren zur Bestimmung des Widerstandes gegen Durchstoßen und dynamisches Weiterreißen von Materialien (ISO 13995:2000)
Diese Europäische Norm gibt ein Prüfverfahren zur Bestimmung des Widerstandes gegen Durchstoßen und des dynamischen Weiterreißens von Schutzkleidungsmaterialien, die in Situationen verwendet werden, wo Snagging und Weiterreißen zu einer inakzeptablen Beschädigung der Kleidung führen könnte oder für deren Träger durch Verlust an Unversehrtheit eine Gefahr entstehen könnte.
Vêtements de protection - Propriétés mécaniques - Méthode d'essai pour la détermination de la résistance à la perforation et au dynamique des matériaux (ISO 13995:2000)
La présente norme internationale spécifie une méthode d'essai pour la détermination de la résistance à la perforation et au déchirement dynamique de matériaux de vêtements de protection utilisés dans des situations où des accrocs et des déchirures peuvent entraîner des détériorations inacceptables des vêtements ou un risque pour celui qui les porte suite à la perte de l'intégrité d'une barrière. Il est prévu d'utiliser les niveaux de performance déterminés pour spécifier les matériaux à utiliser dans des situations où le risque de dommage est lié à la taille de la perforation et de la déchirure susceptible de survenir en cas d'accident.
Varovalna obleka - Mehanske lastnosti - Preskusna metoda za ugotavljanje odpornosti proti prebadanju in dinamičnemu trganju materiala (ISO 13995:2000)
General Information
- Status
- Published
- Publication Date
- 30-Nov-2000
- Withdrawal Date
- 01-Jul-2001
- Technical Committee
- CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
- Drafting Committee
- CEN/TC 162/WG 5 - Resistance to mechanical impact of protective clothing
- Current Stage
- 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
- Start Date
- 13-Feb-2006
- Completion Date
- 13-Feb-2006
Overview
EN ISO 13995:2000 - Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials - is a CEN-adopted European Standard identical to ISO 13995:2000. The standard defines a laboratory test method to measure how protective clothing materials resist puncture and dynamic tearing under conditions where snagging or tearing could cause unacceptable damage or loss of barrier integrity.
Key Topics
- Scope and purpose: Describes testing for materials used in protective garments where puncture or dynamic tear can endanger the wearer or destroy the protective function.
- Test method: Specifies a reproducible procedure to determine resistance to puncture and to dynamic tearing of textile and other clothing materials.
- Specimen preparation and conditioning: Covers preparation and environmental conditioning to ensure comparable test results (material handling, orientation and sample size).
- Measurement and reporting: Defines the parameters to be measured (force/energy to puncture or to propagate a dynamic tear) and how results should be recorded for use in specifications and quality control.
- Relevance to material integrity: Enables evaluation of how materials respond to sudden loads or snagging events that may occur during use.
Applications
EN ISO 13995 is used to:
- Evaluate puncture resistance and dynamic tear resistance of fabrics, laminates and composite materials for protective clothing.
- Support product development and material selection for PPE in healthcare, industrial, chemical and emergency-response sectors.
- Provide objective data for quality control, supplier comparison, and material specifications.
- Inform risk assessments where loss of clothing barrier integrity (due to snagging or tearing) could pose biological, chemical or mechanical hazards.
- Assist procurement teams and regulatory bodies in defining minimum mechanical performance for protective garments.
Who Uses This Standard
- PPE manufacturers and material suppliers
- Independent testing laboratories and certification bodies
- Product designers and R&D teams developing protective clothing
- Occupational safety professionals, purchasers and regulators
Related Standards
For comprehensive protection assessment, EN ISO 13995 is typically used alongside other standards addressing abrasion, tensile strength, seam performance and barrier properties. When specifying protective clothing, combine puncture/tear data with standards for fluid penetration, chemical resistance and whole-garment performance.
Keywords: EN ISO 13995, ISO 13995:2000, puncture resistance, dynamic tearing, protective clothing, test method, mechanical properties, PPE testing, CEN.
Frequently Asked Questions
EN ISO 13995:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Protective clothing - Mechanical properties - Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000)". This standard covers: This European Standard specifies a test method for the determination of the resistance to puncture and dynamic tearing of protective clothing materials which are used in situations where snagging and tearing could result in unacceptable damage to the clothing or danger to the wearer through loss of integrity of a barrier.
This European Standard specifies a test method for the determination of the resistance to puncture and dynamic tearing of protective clothing materials which are used in situations where snagging and tearing could result in unacceptable damage to the clothing or danger to the wearer through loss of integrity of a barrier.
EN ISO 13995:2000 is classified under the following ICS (International Classification for Standards) categories: 13.340.10 - Protective clothing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 13995:2000 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 13995:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2001
9DURYDOQDREOHND0HKDQVNHODVWQRVWL3UHVNXVQDPHWRGD]DXJRWDYOMDQMH
RGSRUQRVWLSURWLSUHEDGDQMXLQGLQDPLþQHPXWUJDQMXPDWHULDOD ,62
Protective clothing - Mechanical properties - Test method for the determination of the
resistance to puncture and dynamic tearing of materials (ISO 13995:2000)
Schutzkleidung - Mechanische Eigenschaften - Prüfverfahren zur Bestimmung des
Widerstandes gegen Durchstoßen und dynamisches Weiterrei
...
EN ISO 13995:2000 is a European Standard that provides a test method for determining the resistance to puncture and dynamic tearing of materials used in protective clothing. This standard is important in situations where snagging and tearing could potentially cause harm to the wearer or damage to the clothing. It helps ensure that the clothing maintains its integrity and acts as a barrier to protect the wearer.
EU ISO 13995: 2000은 보호복 소재의 찌르기 및 동적 찢김 저항력을 결정하기 위한 테스트 방법을 명시한 유럽 표준이다. 이 표준은 갈고닦기와 찢어짐으로 인해 옷의 피해나 착용자의 안전에 위협이 될 수 있는 상황에서 사용되는 보호복 소재에 대한 중요성을 갖고 있다. 이 표준은 옷이 무결성을 유지하고 착용자를 보호하기 위해 장벽 역할을 하도록 보장하는 것을 도와준다.
記事の要約を日本語でお願いします： 記事のタイトル：EN ISO 13995:2000 - 保護衣料品 - 機械的特性 - 素材の耐穿刺性と動的な引き裂きの試験方法 (ISO 13995:2000) 記事の内容：この欧州規格は、引っかかりや引き裂きが衣料品に受け入れがたい損傷やバリアの完全性の喪失による着用者の危険を引き起こす可能性のある状況で使用される保護衣料品の素材の耐穿刺性と動的な引き裂きの試験方法を規定しています。
The article discusses EN ISO 13995:2000, a European standard that provides a test method for evaluating the resistance to puncture and dynamic tearing of materials used in protective clothing. This standard is important for materials used in situations where snagging or tearing could lead to damage or pose a risk to the wearer. It helps ensure the clothing maintains its integrity as a barrier to potential dangers.
本稿は、EN ISO 13995:2000に関するものであり、「ISO欧州標準」で保護服素材の刺穿および動的な引き裂きへの耐性を測定するための試験方法が規定されている。この標準は、引っかかりや引き裂きが服の損傷や着用者への危険を引き起こす可能性のある状況で使用される保護服の素材における重要性を示している。これにより、服がその完全性を保ち、着用者を保護するための障壁として機能することを確保する役割を果たしている。
한글로 된 아래 기사의 요약을 해주세요: 제목: EN ISO 13995:2000 - 보호 의류 - 기계적 특성 - 재료의 찌르기 저항과 동적 찢김 저항성을 측정하기 위한 시험 방법 (ISO 13995:2000) 내용: 이 유럽 표준은 찢김과 찢어짐이 의류에 불필요한 손상이나 착용자의 안전을 해칠 수 있는 상황에서 사용되는 보호 의류 재료의 찌르기 저항과 동적 찢김 저항성을 측정하기 위한 시험 방법을 명시합니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...