EN ISO 19403-1:2020

Paints and varnishes - Wettability - Part 1: Terminology and general principles (ISO 19403-1:2017)

The ISO 19403 series specifies optical test methods
-      for the measurement of the contact angle,
-      for the determination of the free surface energy of a solid surface, including the polar and dispersive fractions,
-      for the determination of the surface tension of liquids, including the polar and dispersive fractions, and
-      for the checking of the measurement arrangement with reference materials.
It can be applied for the characterization of substrates, coatings and coating materials.
The applicability can be restricted for liquids with non-Newtonian rheology[1].
ISO 19403-1:2017 specifies terms and definitions and defines the general principles.
[1] This term is defined in DIN 1342-1.

Beschichtungsstoffe - Benetzbarkeit - Teil 1: Begriffe und allgemeine Grundlagen (ISO 19403-1:2017)

Peintures et vernis - Mouillabilité - Partie 1: Terminologie et principes généraux (ISO 19403-1:2017)

La série ISO 19403 spécifie des méthodes d'essai optiques permettant de:
—          mesurer l'angle de contact;
—          déterminer l'énergie libre de surface d'une surface solide, y compris les fractions polaire et dispersive;
—          déterminer la tension superficielle des liquides, y compris les fractions polaire et dispersive; et
—          contrôler le dispositif de mesure à l'aide de produits de référence.
Cette série de normes peut être utilisée pour la caractérisation de substrats, de revêtements et de produits de peinture.
Son applicabilité peut être limitée pour les produits liquides de rhéologie non newtonienne[1].
Le présent document spécifie les termes et définitions et définit les principes généraux.
[1] Ce terme est défini dans la norme DIN 1342-1.

Barve in laki - Omočljivost - 1. del: Terminologija in splošna načela (ISO 19403-1:2017)

General Information

• Status: Withdrawn
• Publication Date: 11-Feb-2020
• Withdrawal Date: 21-Jun-2022
• ICS: 01.040.87 - Paint and colour industries (Vocabularies)
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Jun-2022
• Ref Project: SIST EN ISO 19403-1:2020 - Paints and varnishes - Wettability - Part 1: Terminology and general principles (ISO 19403-1:2017)

Relations

• Replaced By: EN ISO 19403-1:2022 - Paints and varnishes - Wettability - Part 1: Vocabulary and general principles (ISO 19403-1:2022)
• Effective Date: 29-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19403-1:2020
01-april-2020
Barve in laki - Omočljivost - 1. del: Terminologija in splošna načela (ISO 19403-
1:2017)
Paints and varnishes - Wettability - Part 1: Terminology and general principles (ISO
19403-1:2017)
Beschichtungsstoffe - Benetzbarkeit - Teil 1: Begriffe und allgemeine Grundlagen (ISO
19403-1:2017)
Peintures et vernis - Mouillabilité - Partie 1: Terminologie et principes généraux (ISO
19403-1:2017)
Ta slovenski standard je istoveten z: EN ISO 19403-1:2020
ICS:
01.040.87 Industrija barv (Slovarji) Paint and colour industries
(Vocabularies)
87.040 Barve in laki Paints and varnishes
SIST EN ISO 19403-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19403-1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19403-1:2020


EN ISO 19403-1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 01.040.87; 87.040
English Version

Paints and varnishes - Wettability - Part 1: Terminology
and general principles (ISO 19403-1:2017)
Peintures et vernis - Mouillabilité - Partie 1: Beschichtungsstoffe - Benetzbarkeit - Teil 1: Begriffe
Terminologie et principes généraux (ISO 19403- und allgemeine Grundlagen (ISO 19403-1:2017)
1:2017)
This European Standard was approved by CEN on 4 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19403-1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19403-1:2020
EN ISO 19403-1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19403-1:2020
EN ISO 19403-1:2020 (E)
European foreword
The text of ISO 19403-1:2017 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 19403-1:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19403-1:2017 has been approved by CEN as EN ISO 19403-1:2020 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 19403-1:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 19403-1:2020
INTERNATIONAL ISO
STANDARD 19403-1
First edition
2017-06
Paints and varnishes — Wettability —
Part 1:
Terminology and ge
...