EN ISO 7500-1:2015

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2015)

ISO 7500-1:2015 specifies the calibration and verification of tension/compression testing machines.
The verification consists of:
- a general inspection of the testing machine, including its accessories for the force application;
- a calibration of the force-measuring system of the testing machine;
- a confirmation that the performance properties of the testing machine achieve the limits given for a specified class.
NOTE This part of ISO 7500 addresses the static calibration and verification of the force-measuring systems. The calibration values are not necessarily valid for high-speed or dynamic testing applications. Further information regarding dynamic effects is given in the Bibliography.
CAUTION Some of the tests specified in this part of ISO 7500 involve the use of processes which could lead to a hazardous situation.

Metallische Werkstoffe - Kalibrierung und Überprüfung von statischen einachsigen Prüfmaschinen - Teil 1: Zug­ und Druckprüfmaschinen - Kalibrierung und Überprüfung der Kraftmesseinrichtung (ISO 7500-1:2015)

Dieser Teil von ISO 7500 legt die Kalibrierung und Überprüfung von Zug  und Druckprüfmaschinen fest.
Die Überprüfung besteht aus:
   einer allgemeinen Inspektion der Prüfmaschine einschließlich der Maschinenteile für die Kraft¬auf-bringung;
   einer Kalibrierung der Kraftmesseinrichtung der Prüfmaschine;
   einer Bestätigung, dass die ermittelten Eigenschaften der Prüfmaschine die für eine festgelegte Klasse angegebenen Grenzwerte erreichen.
ANMERKUNG   Dieser Teil von ISO 7500 betrifft die statische Kalibrierung und Überprüfung von Kraftmess¬ein-richtungen. Die Kalibrierergebnisse sind nicht notwendigerweise für Anwendungen für hochgeschwindig¬keits- oder  dynamische Prüfungen gültig. Weitere Informationen bezüglich dynamischer Effekte sind in den Literaturhinweisen angegeben.
ACHTUNG — Bei einigen der in diesem Teil von ISO 7500 festgelegten Prüfungen werden Prozesse angewendet, die zu gefährlichen Situationen führen könnten.

Matériaux métalliques - Étalonnage et vérification des machines pour essais statiques uniaxiaux - Partie 1: Machines d'essai de traction/compression - Étalonnage et vérification du système de mesure de force (ISO 7500-1:2015)

ISO 7500-1:2015 spécifie l'étalonnage et la vérification des machines d'essai de traction/compression.
La vérification consiste en:
- une inspection générale de la machine d'essai, y compris ses accessoires pour l'application des forces;
- un étalonnage du système de mesure de force.
- une confirmation que les propriétés de la machine d'essai concernant ses performances atteignent les limites indiquées pour une classe spécifiée.
NOTE La présente partie de l'ISO 7500 traite de l'étalonnage et de la vérification statique des systèmes de mesure de force. Les valeurs d'étalonnage ne sont pas nécessairement valables pour les applications d'essais dynamiques ou à grande vitesse. La bibliographie donne des informations complémentaires sur les effets dynamiques.
ATTENTION ? Certains des essais spécifiés dans cette partie de l'ISO 7500 implique l'utilisation de processus qui pourrait conduire à une situation dangereuse.

Kovinski materiali - Preverjanje statičnih enoosnih preskuševalnih strojev - 1. del: Preskuševalni stroji za natezni/tlačni preskus - Preverjanje in umerjanje sistema za merjenje sile (ISO 7500-1:2015)

Ta del standarda ISO 7500 določa metodo za umerjanje in preverjanje preskuševalnih strojev za natezni/tlačni preskus.
Preverjanje je sestavljeno iz:
– splošnega pregleda preskuševalnega stroja, vključno z njegovimi priključki za uvajanje sile;
– umerjanja sistema za merjenje sile preskuševalnega stroja;
– potrditve, da zmogljivosti preskuševalnega stroja dosegajo mejne vrednosti, podane za
določen razred.
OPOMBA: Ta del standarda ISO 7500 obravnava statično umerjanje in preverjanje sistemov za natezni/tlačni
preskus. Ni nujno, da vrednosti umerjanja veljajo za uporabo pri visokih hitrostih ali dinamičnemu preskušanju. Dodatne informacije o dinamičnih učinkih so podane v bibliografiji.
POZOR – Nekateri preskusi, podani v tem delu standarda ISO 7500, vključujejo uporabo postopkov, ki lahko vodijo v nevarno stanje.

General Information

• Status: Withdrawn
• Publication Date: 22-Dec-2015
• Withdrawal Date: 13-Mar-2018
• ICS: 19.060 - Mechanical testing
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 14-Mar-2018
• Ref Project: SIST EN ISO 7500-1:2016 - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2015)

Relations

• Replaces: EN ISO 7500-1:2004/AC:2009 - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004/Cor 1:2008)
• Effective Date: 30-Dec-2015
• Replaces: EN ISO 7500-1:2004 - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)
• Effective Date: 30-Dec-2015
• Replaced By: EN ISO 7500-1:2018 - Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
• Effective Date: 16-Nov-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7500-1:2016
01-marec-2016
1DGRPHãþD
SIST EN ISO 7500-1:2004
SIST EN ISO 7500-1:2004/AC:2009
.RYLQVNLPDWHULDOL3UHYHUMDQMHVWDWLþQLKHQRRVQLKSUHVNXãHYDOQLKVWURMHYGHO
3UHVNXãHYDOQLVWURML]DQDWH]QLWODþQLSUHVNXV3UHYHUMDQMHLQXPHUMDQMHVLVWHPD]D
PHUMHQMHVLOH,62
Metallic materials - Verification of static uniaxial testing machines - Part 1:
Tension/compression testing machines - Verification and calibration of the force-
measuring system (ISO 7500-1:2015)
Metallische Werkstoffe - Prüfung von statischen einachsigen Prüfmaschinen - Teil 1: Zug­
und Druckprüfmaschinen - Prüfung und Kalibrierung der Kraftmesseinrichtung (ISO 7500
-1:2015)
Matériaux métalliques - Vérification des machines pour essais statiques uniaxiaux -
Partie 1: Machines d'essai de traction/compression - Vérification et étalonnage du
système de mesure de force (ISO 7500-1:2015)
Ta slovenski standard je istoveten z: EN ISO 7500-1:2015
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 7500-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7500-1:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 7500-1:2016


EN ISO 7500-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2015
EUROPÄISCHE NORM
ICS 77.040.10 Supersedes EN ISO 7500-1:2004
English Version

Metallic materials - Calibration and verification of static
uniaxial testing machines - Part 1: Tension/compression
testing machines - Calibration and verification of the force-
measuring system (ISO 7500-1:2015)
Matériaux métalliques - Étalonnage et vérification des Metallische Werkstoffe - Kalibrierung und
machines pour essais statiques uniaxiaux - Partie 1: Überprüfung von statischen einachsigen
Machines d'essai de traction/compression - Étalonnage Prüfmaschinen - Teil 1: Zug- und Druckprüfmaschinen
et vérification du système de mesure de force (ISO - Kalibrierung und Überprüfung der
7500-1:2015) Kraftmesseinrichtung (ISO 7500-1:2015)
This European Standard was approved by CEN on 21 November 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7500-1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7500-1:2016
EN ISO 7500-1:2015 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7500-1:2016
EN ISO 7500-1:2015 (E)
European foreword
This document (EN ISO 7500-1:2015) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC 101 “Test methods
for steel (other than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 7500-1:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to imple
...