EN ISO 2813:1999

Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997)

Specifies a test method for determining the specular gloss of paint films using a reflectometer geometry of 20°, 60° or 85°. The 60° geometry is applicable to all paint films, but for very high gloss and near-matt films 20° or 85° may be more suitable. The 20° geometry is intended to give improved differentiation between high-gloss paint films. The 85° geometry is intended to give improved differentiation between low-gloss paint films. The method is not suitable for the measurement of the gloss of metallic paints.

Beschichtungsstoffe - Bestimmung des Reflektometerwertes von Beschichtungen (außer Metallic-Beschichtungen) unter 20°, 60° und 85° (ISO 2813:1994, einschließlich Technische Korrektur 1:1997)

Diese Internationale Norm gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung von Beschichtungsstoffen behandelt. Diese Internationale Norm legt ein Verfahren zum Bestimmen des Reflektometerwertes von Beschichtungen unter den drei Meßgeometrien 20°, 60° oder 85° fest. Das Verfahren ist für die Messung des Glanzes von Metallic-Beschichtungen nicht geeignet.

Peintures et vernis - Détermination de la réflexion spéculaire de feuils de peinture non métallisée à 20°, 60° et 85° (ISO 2813:1994, Rectificatif Technique 1:1997, inclus)

Barve in laki - Določevanje sijaja neefektnih premaznih sredstev pod koti 20o, 60o in 85o (ISO 2813:1994, vključno s tehničnim popravkom 1:1997)

General Information

• Status: Withdrawn
• Publication Date: 20-Apr-1999
• Withdrawal Date: 14-Oct-2014
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Oct-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/111 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures
• Ref Project: SIST EN ISO 2813:1999 - Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997)

Relations

• Replaced By: EN ISO 2813:2014 - Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
• Effective Date: 22-Oct-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2813:1999
01-september-1999
%DUYHLQODNL'RORþHYDQMHVLMDMDQHHIHNWQLKSUHPD]QLKVUHGVWHYSRGNRWLRR
LQR,62YNOMXþQRVWHKQLþQLPSRSUDYNRP
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°,
60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997)
Beschichtungsstoffe - Bestimmung des Reflektometerwertes von Beschichtungen (außer
Metallic-Beschichtungen) unter 20°, 60° und 85° (ISO 2813:1994, einschließlich
Technische Korrektur 1:1997)
Peintures et vernis - Détermination de la réflexion spéculaire de feuils de peinture non
métallisée a 20°, 60° et 85° (ISO 2813:1994, Rectificatif Technique 1:1997, inclus)
Ta slovenski standard je istoveten z: EN ISO 2813:1999
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2813:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2813:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 2813:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 2813:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 2813:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 2813:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 2813:1999
INTERNATIONAL
Is0
STANDARD
2813
Third edition
1994-08-01
Paints and varnishes - Determination of
specular gloss of non-metallic paint films
at 20°, 60” and 85”
Peintures et vemis
- Dhermination de la rdflexion spbculaire de feuils
de peinture non m&a/Me 9 20, 60” et 85”
Reference number
IS0 2813:1994(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 2813:1999
IS0 2813:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(I EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 2813 was prepared by Technical Committee
ISOFC 35, Paints and varnishes, Subcommittee SC 9, General test
methods for paints and varnishes.
This third edition cancels and replaces the second edition
(IS0 2813:1978), the whole text of which has been technically revised.
Annex A forms an integral part of this International Standard. Annex B is
for information only.
0 IS0 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 2813:1999
INTERNATIONAL STANDARD 0 ISO IS0 2813:1994(E)
Paints and varnishes - Determination of specular
gloss of non-metallic paint films at 20”, 60” and 85”
of this International Standard. At the time of publica-
1 Scope
tion, the editions indicated were valid. All standards
are subject to revision, and parties to agreements
This International Standard is one of a series of stan-
based on this International Standard are encouraged
dards dealing with the sampling and testing of paints,
to investigate the possibility of applying the most re-
varnishes and related products.
cent editions of the standards indicated below.
Members of IEC and IS0 maintain registers of cur-
It specifies a test method for determining the specular
gloss of paint films using a reflectometer geometry rently valid International Standards.
of 20”, 60” or 85’. The method is not suitable for the
IS0 15 12: 1991, Paints and varnishes - Sampling of
measurement of the gloss of metallic paints.
products in liquid or paste form.
a) The 60” geometry is applicable to all paint films,
IS0 1513:1992, Paints and varnishes - Examination
but for very high gloss and near-matt films 20” or
and preparation of samples for testing.
85" may be more suitable.
I SO 2808: 1991, Paints and varnishes - De termi-
b) The 20” geometry, which uses a smaller receptor
nation of film thickne
...