EN ISO 10650:2015
(Main)Dentistry - Powered polymerization activators (ISO 10650:2015)
Dentistry - Powered polymerization activators (ISO 10650:2015)
ISO 10650:2015 specifies requirements and test methods for powered polymerization activators in the 385 nm ? 515 nm wavelength region intended for chairside use in polymerization of dental polymer-based materials. This International Standard applies to quartz-tungsten-halogen lamps and light-emitting diode (LED) lamps. Powered polymerization activators could have internal power supply (rechargeable battery powered) or be connected to external (mains) power supply. Lasers or plasma arc devices are not covered by this International Standard.
ISO 10650:2015 does not cover powered polymerization activators used in laboratory fabrication of indirect restorations, veneers, dentures, or other oral dental appliances. This International Standard takes priority over IEC 60601‑1 where specified in the individual clauses of this International Standard.
Zahnheilkunde - Polymerisationslampen (ISO 10650:2015)
Diese Internationale Norm legt Anforderungen an und Prüfverfahren für Polymerisationslampen im Wellen-längenbereich von 400 nm bis 515 nm fest, die für die Anwendung am Patientenstuhl zur Polymerisation von Dentalwerkstoffen auf Kunststoffbasis vorgesehen sind. Diese Internationale Norm gilt für wiederaufladbare batteriebetriebene Quarz-Wolfram-Halogenlampen und Lumineszenzdiodenlampen (LED). Polymerisations-lampen können über eine eingebaute Energieversorgung (wiederaufladbare Batterie) verfügen oder an die externe Stromversorgung (Stromnetz) angeschlossen sein. Laser oder Plasmalichtbogengeräte werden von dieser Norm nicht erfasst.
Diese Internationale Norm gilt nicht für Polymerisationslampen, die im Dentallabor zur Herstellung von indirekten Restaurationen, Veneers, Prothesen oder anderen oralen Anwendungen verwendet werden. Wo das in den einzelnen Abschnitten dieser Internationalen Norm festgelegt ist, hat dieser Teil von ISO 10650 Vorrang vor IEC 60601-1:2005+A1:2012.
Médecine bucco-dentaire - Activateurs électriques de polymérisation (ISO 10650:2015)
ISO 10650:2015 spécifie les exigences et les méthodes d'essai relatives aux activateurs électriques de polymérisation, dans le domaine de longueur d'onde de 385 nm à 515 nm, destinés à être utilisés à proximité du fauteuil dentaire pour polymériser les matériaux dentaires à base de polymères. La présente Norme internationale s'applique aux lampes halogènes au tungstène à quartz et aux lampes à diodes électroluminescentes (LED). Les activateurs électriques de polymérisation peuvent avoir une alimentation électrique interne (à pile rechargeable) ou être raccordés à une alimentation électrique externe (secteur). Les dispositifs à lasers ou à arc plasma ne sont pas couverts par la présente Norme internationale.
ISO 10650:2015 ne s'applique pas aux activateurs électriques de polymérisation utilisés en laboratoire pour la fabrication des restaurations indirectes, facettes, prothèses ou autres appareils buccaux. Partout où cela est spécifié dans ses différents articles, la présente Norme internationale a la priorité sur l'IEC 60601‑1.
Zobozdravstvo - Polimerizacijski aktivatorji (ISO 10650:2015)
Ta mednarodni standard določa zahteve in preskusne metode za polimerizacijske aktivatorje v območju valovne dolžine od 385 nm do 515 nm, ki so namenjeni za uporabo v ordinaciji za polimerizacijo zobozdravstvenih materialov na osnovi polimerov. Ta mednarodni standard velja za halogenske svetilke »Quartz tungsten« in svetilke s svetlečimi diodami (LED). Polimerizacijski aktivatorji imajo lahko notranje napajanje (napajanje prek polnilne baterije) ali so povezani z zunanjim napajalnim omrežjem. Ta mednarodni standard ne zajema laserjev ali naprav s plazemskim oblokom.
Ta mednarodni standard ne zajema polimerizacijskih aktivatorjev, ki se uporabljajo pri laboratorijski
izdelavi posrednih preureditev, lusk, protez ali drugih ustnih zobnih aparatov. Ta mednarodni standard ima prednost pred standardom IEC 60601-1, kjer je to navedeno v posameznih točkah tega mednarodnega standarda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10650:2015
01-december-2015
1DGRPHãþD
SIST EN ISO 10650-1:2005
SIST EN ISO 10650-2:2008
Zobozdravstvo - Polimerizacijski aktivatorji (ISO 10650:2015)
Dentistry - Powered polymerization activators (ISO 10650:2015)
Zahnheilkunde - Polymerisationslampen (ISO 10650:2015)
Médecine bucco-dentaire - Activateurs électriques de polymérisation (ISO 10650:2015)
Ta slovenski standard je istoveten z: EN ISO 10650:2015
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
SIST EN ISO 10650:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10650:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 10650:2015
EN ISO 10650
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2015
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 10650-1:2005, EN ISO 10650-
2:2007
English Version
Dentistry - Powered polymerization activators (ISO
10650:2015)
Médecine bucco-dentaire - Activateurs électriques de Zahnheilkunde - Polymerisationslampen (ISO
polymérisation (ISO 10650:2015) 10650:2015)
This European Standard was approved by CEN on 22 August 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10650:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10650:2015
EN ISO 10650:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10650:2015
EN ISO 10650:2015 (E)
European foreword
This document (EN ISO 10650:2015) has been prepared by Technical Committee ISO/TC 106
“Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10650-1:2005, EN ISO 10650-2:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10650:2015 has been approved by CEN as EN ISO 10650:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10650:2015
---------------------- Page: 6 ----------------------
SIST EN ISO 10650:2015
INTERNATIONAL ISO
STANDARD 10650
First edition
2015-09-15
Dentistry — Powered polymerization
activators
Médecine bucco-dentaire — Activateurs électriques de polymérisation
Reference number
ISO 10650:2015(E)
©
ISO 2015
---------------------- Page: 7 ----------------------
SIST EN ISO 10650:2015
ISO 10650:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Pub
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.