Dentistry - Powered polymerization activators (ISO 10650:2018)

This document specifies requirements and test methods for powered polymerization activators in the 380 nm to 515 nm wavelength region intended for chairside use in polymerization of dental polymer-based materials.
This document applies to quartz-tungsten-halogen lamps and light-emitting diode (LED) lamps. Powered polymerization activators could have internal power supply (rechargeable battery powered) or be connected to external (mains) power supply. Lasers or plasma arc devices are not covered by this standard.
This document does not cover powered polymerization activators used in laboratory fabrication of indirect restorations, veneers, dentures or other oral dental appliances.

Zahnheilkunde - Polymerisationslampen (ISO 10650:2018)

Médecine bucco-dentaire - Activateurs électriques de polymérisation (ISO 10650:2018)

Le présent document spécifie les exigences et les méthodes d'essai relatives aux activateurs électriques de polymérisation, dans le domaine de longueur d'onde de 380 nm à 515 nm, destinés à être utilisés à proximité du fauteuil dentaire pour polymériser les matériaux dentaires à base de polymères.
Le présent document s'applique aux lampes halogènes au tungstène à quartz et aux lampes à diodes électroluminescentes (LED). Les activateurs électriques de polymérisation peuvent avoir une alimentation électrique interne (à batterie rechargeable) ou être raccordés à une alimentation électrique externe (secteur). Les dispositifs à lasers ou à arc plasma ne sont pas couverts par la présente norme.
Le présent document ne s'applique pas aux activateurs électriques de polymérisation utilisés en laboratoire pour la fabrication des restaurations indirectes, facettes, prothèses ou autres appareils buccaux.

Zobozdravstvo - Polimerizacijski aktivatorji (ISO 10650:2018)

Ta dokument določa zahteve in preskusne metode za polimerizacijske aktivatorje v območju valovne dolžine od 380 nm do 515 nm, ki so namenjeni za uporabo v ordinaciji za polimerizacijo zobozdravstvenih materialov na osnovi polimerov.
Ta dokument se uporablja za halogenske svetilke »Quartz tungsten« in svetilke s svetlečimi diodami (LED). Polimerizacijski aktivatorji imajo lahko notranje napajanje (napajanje prek polnilne baterije) ali so povezani z zunanjim napajalnim omrežjem. Ta standard ne zajema laserjev ali naprav s plazemskim oblokom.
Ta dokument ne zajema polimerizacijskih aktivatorjev, ki se uporabljajo pri laboratorijski izdelavi posrednih preureditev, lusk, protez ali drugih ustnih zobnih aparatov.

General Information

Status
Published
Publication Date
02-Oct-2018
Withdrawal Date
29-Apr-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Oct-2018
Completion Date
03-Oct-2018

Relations

Buy Standard

Standard
EN ISO 10650:2018
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10650:2017
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10650:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 10650:2015
Zobozdravstvo - Polimerizacijski aktivatorji (ISO 10650:2018)
Dentistry - Powered polymerization activators (ISO 10650:2018)
Zahnheilkunde - Polymerisationslampen (ISO 10650:2018)
Médecine bucco-dentaire - Activateurs électriques de polymérisation (ISO 10650:2018)
Ta slovenski standard je istoveten z: EN ISO 10650:2018
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
SIST EN ISO 10650:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10650:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 10650:2018


EN ISO 10650
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 10650:2015
English Version

Dentistry - Powered polymerization activators (ISO
10650:2018)
Médecine bucco-dentaire - Activateurs électriques de Zahnheilkunde - Polymerisationslampen (ISO
polymérisation (ISO 10650:2018) 10650:2018)
This European Standard was approved by CEN on 21 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10650:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10650:2018
EN ISO 10650:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10650:2018
EN ISO 10650:2018 (E)
European foreword
This document (EN ISO 10650:2018) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10650:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10650:2018 has been approved by CEN as EN ISO 10650:2018 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 10650:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 10650:2018
INTERNATIONAL ISO
STANDARD 10650
Second edition
2018-08
Dentistry — Powered polymerization
activators
Médecine bucco-dentaire — Activateurs électriques de polymérisation
Reference number
ISO 10650:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 10650:2018
ISO 10650:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of
...

SLOVENSKI STANDARD
oSIST prEN ISO 10650:2017
01-junij-2017
Zobozdravstvo - Polimerizacijski aktivatorji (ISO/DIS 10650:2017)
Dentistry - Powered polymerization activators (ISO/DIS 10650:2017)
Zahnheilkunde - Polymerisationslampen (ISO/DIS 10650:2017)
Médecine bucco-dentaire - Activateurs électriques de polymérisation (ISO/DIS
10650:2017)
Ta slovenski standard je istoveten z: prEN ISO 10650
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
oSIST prEN ISO 10650:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10650:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10650:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10650
ISO/TC 106/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2017-04-17 2017-07-09
Dentistry — Powered polymerization activators
Médecine bucco-dentaire — Activateurs électriques de polymérisation
ICS: 11.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10650:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10650:2017
ISO/DIS 10650:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10650:2017
ISO/DIS 10650:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 General . 2
5.1.1 Design . 2
5.1.2 Connection . 2
5.1.3 Operating controls .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.