Road service area maintenance equipment - Part 3: Classification

This Technical Specification defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436-1 and used for:
- grass cutting and brushcutting;
- mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas.

Straßenbetriebsdienstausstattung - Teil 3: Klassifikation

Diese Technische Spezifikation legt die Klassifizierungskriterien von Geräten für den Straßenbetriebsdienst fest, die im Anwendungsbereich von EN 15436 1 beschrieben und für folgende Tätigkeiten genutzt werden:
-   Mäharbeiten und Gestrüppentfernung;
-   mechanisches Schneiden von Pflanzen.
Die vorgenannten Geräte sind auf Trägerfahrzeugen mit Eigenantrieb montiert und sind einerseits dafür vorgesehen Gras zu mähen und Gestrüpp zu verkleinern, und andererseits Bäume oder junge, unbeschnittene Bäume und Sträucher in Straßenrandbereichen zu schneiden.

Matériel d'entretien des dépendances routières - Partie 3 : Classification

La présente Spécification Technique définit les critères de classification des matériels d’entretien des dépendances routières décrits dans le domaine d’application de la norme EN 15436-1, c’est-à-dire :
- fauchage et débroussaillage ;
- taille mécanique des végétaux.
Ces matériels sont montés sur porteur automoteur et sont destinés d'une part à faucher et broyer l'herbe et les broussailles et d'autre part à tailler les arbres, baliveaux et arbustes, des dépendances routières.

Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - 3. del: Klasifikacija

General Information

Status
Withdrawn
Publication Date
17-Feb-2009
Withdrawal Date
30-Jun-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-Jul-2015

Relations

Buy Standard

Technical specification
TS CEN/TS 15436-3:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15436-3:2009
01-maj-2009
Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - 3. del:
Klasifikacija
Road service area maintenance equipment - Part 3: Classification
Straßenbetriebsdienstausstattung - Teil 3: Klassifikation
Matériel d'entretien des dépendances routières - Partie 3: Classification
Ta slovenski standard je istoveten z: CEN/TS 15436-3:2009
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
SIST-TS CEN/TS 15436-3:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15436-3:2009

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15436-3:2009
TECHNICAL SPECIFICATION
CEN/TS 15436-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2009
ICS 43.160
English Version
Road service area maintenance equipment - Part 3:
Classification
Matériel d'entretien des dépendances routières - Partie 3: Straßenbetriebsdienstausstattung - Teil 3: Klassifikation
Classification
This Technical Specification (CEN/TS) was approved by CEN on 22 December 2008 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15436-3:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15436-3:2009
CEN/TS 15436-3:2009 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Definition of machine classes .5
4.1 Machine class .5
4.2 Tolerances on characteristics for machine construction .7

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 15436-3:2009
CEN/TS 15436-3:2009 (E)
Foreword
This document (CEN/TS 15436-3:2009) has been prepared by Technical Committee CEN/TC 337 “Winter
maintenance and road service area maintenance equipment”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This Technical Specification was prepared with the aim of having a 3-year lifetime.
This European standard comprises four parts:
 EN 15436-1, Road service area maintenance equipment – Part 1: Terminology;
 EN 15436-2, Road service area maintenance equipment – Part 2: Performance assessment;
 CEN/TS 15436-3, Road service area maintenance equipment – Part 3: Classification;
 prEN 15436-4, Road service area maintenance equipment – Part 4: Delivery acceptance of the machines
by the users.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
count
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.