iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 17106-1:2021

(Main)

Road operation machinery - Safety - Part 1: General requirements

Road operation machinery - Safety - Part 1: General requirements

This document specifies the common safety requirements for road operation machinery.
This document deals with the significant hazards common to road operation machinery, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE    The requirements specified in this part of the standard are common to two or more families of road operation machinery.
This document gives safety requirements for all types of road operation machinery and shall be used in conjunction with one of parts x to xx.
These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of road operation machinery in question.
This European Standard applies to:
a)   Road surface cleaning machines (as currently defined in EN 15429-1);
b)   Winter service machines (as defined in group 1 and 2 of EN 15144);
c)   Road service area maintenance machines for:
   grass cutting (see Clause 3.1.1.1 of EN 15436-1:2008);
   brush/hedge cutting (see Clause 3.1.1.2 of EN 15436-1:2008);
   mechanical plant/branch cutting (see Clauses 3.1.2 and 3.2.3 of EN 15436-1:2008).
This standard deals with:
a)   equipment permanently mounted on carrier vehicles;
b)   interchangeable equipment;
c)   self-propelled machinery with an integrated  specially designed chassis;
d)   trailed machines;
e)   interfaces.
For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used, e.g. sweeper used for spreading thawing material or snow removing machines with brooms and ploughs shall use the relevant requirements of prEN xxx parts x, x, x.
Road operation machinery within the scope of prEN xxx parts x to x may include interchangeable auxiliary equipment within the scope of prEN xxx part x either as an integral part of its construction or as interchangeably fitted equipment.

Maschinen für den Straßenbetriebsdienst - Sicherheit - Teil 1: Grundlegende Sicherheitsanforderungen

Dieses Dokument legt die allgemeinen Sicherheitsanforderungen für Maschinen für den Straßenbetriebsdienst fest.
Dieses Dokument behandelt die signifikanten Gefährdungen (siehe Anhang A), die bei Maschinen für den Straßenbetriebsdienst über die gesamte Lebensdauer der Maschine hinweg (Transport, Überführungs- und Arbeitsmodi, An- und Abbau von Einrichtungen/Vorrichtungen im Betrieb, routinemäßige Wartung und Lagerung) üblich sind, wenn diese wie vom Hersteller beabsichtigt sowie unter missbräuchlichen Bedingungen in einem Rahmen, wie dieser vom Hersteller vernünftigerweise vorhergesehen werden kann, verwendet werden, mit Ausnahme der Demontage, Stilllegung und Verschrottung.
ANMERKUNG 1   Die in diesem Teil des Dokuments festgelegten Anforderungen gelten für zwei oder mehr Familien von Maschinen für den Straßenbetriebsdienst.
Dieses Dokument enthält allgemeine Sicherheitsanforderungen für alle Typen von Maschinen für den Straßenbetriebsdienst und muss in Verbindung mit Teil 2 bis Teil 4 verwendet werden. Diese maschinenspezifischen Teile wiederholen die Anforderungen nach Teil 1 nicht, sondern erweitern, ersetzen oder modifizieren die Anforderungen in Bezug auf den jeweiligen Typ Maschine für den Straßenbetriebsdienst.
Dieses Dokument gilt für:
[...]

Machines d'exploitation des routes - Sécurité - Partie 1 : Prescriptions générales

Obratovanje cestnih strojev - Varnost - 1. del: Splošne zahteve

General Information

Status
Published
Publication Date
19-Oct-2021
Withdrawal Date
29-Apr-2022
ICS
43.160 - Special purpose vehicles
93.080.99 - Other standards related to road engineering
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 16 - Winter service machines and highway maintenance machines
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Oct-2021
Due Date
26-May-2019
Completion Date
20-Oct-2021
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 17106-1:2021 - Road operation machinery - Safety - Part 1: General requirements

Relations

Replaces
EN 13021:2003+A1:2008 - Winter service machines - Safety requirements
Effective Date
08-Jun-2022
Replaces
EN 13019:2001+A1:2008 - Machines for road surface cleaning - Safety requirements
Effective Date
08-Jun-2022
Replaces
EN 13524:2003+A2:2014 - Highway maintenance machines - Safety requirements
Effective Date
08-Jun-2022

Buy Standard

EN 17106-1:2021EN 17106-1:2021
PreviousNext
Standard
EN 17106-1:2021
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17106-1:2021
01-december-2021
Nadomešča:
SIST EN 13019:2002+A1:2009
SIST EN 13021:2004+A1:2009
SIST EN 13524:2004+A2:2014
Obratovanje cestnih strojev - Varnost - 1. del: Splošne zahteve
Road operation machinery - Safety - Part 1: General requirements
Maschinen für den Straßenbetriebsdienst - Sicherheit - Teil 1 Grundlegende
Sicherheitsanforderungen
Machines d'exploitation des routes - Sécurité - Partie 1 : Exigences générales
Ta slovenski standard je istoveten z: EN 17106-1:2021
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
SIST EN 17106-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17106-1:2021

---------------------- Page: 2 ----------------------
SIST EN 17106-1:2021


EN 17106-1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2021
EUROPÄISCHE NORM
ICS 43.160; 93.080.99; C Supersedes EN 13019:2001+A1:2008, EN
13021:2003+A1:2008, EN 13524:2003+A2:2014
English Version

Road operation machinery - Safety - Part 1: General
requirements
Machines d'exploitation des routes - Sécurité - Partie 1 Maschinen für den Straßenbetriebsdienst - Sicherheit -
: Prescriptions générales Teil 1 Grundlegende Sicherheitsanforderungen
This European Standard was approved by CEN on 16 August 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17106-1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17106-1:2021
EN 17106-1:2021 (E)
Contents
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 9
4 Safety requirements and/or protective/risk reduction measures . 11
4.1 Safety requirements and/or protective/risk reduction measures applicable to all
machines . 11
4.2 Additional requirements and/or measures for self-propelled ride-on machines . 22
4.3 Additional requirements and/or measures for permanently mounted equipment,
interchangeable equipment and trailed machines . 24
5 Verification of the safety requirements and/or protective/risk reduction measures . 26
6 Information for use . 30
6.1 General . 30
6.2 Warning devices, warning signs, signs, indicators and symbols . 30
6.3 Ins
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17106-3-1:2021(Main)
Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs
SIST EN 17106-3-1:2021

This document together with EN 17106 1:2021 deals with all significant hazards, hazardous situations and events relevant to winter service machines – snow clearing machines with rotating tools and snow ploughs when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 17106 1:2021. This document does not repeat the requirements from EN 17106 1:2021 but supplements or modifies the requirements for winter service machines – snow clearing machines with rotating tools and snow ploughs.
This document is not applicable to snow clearing machines with rotating tools and snow ploughs manufactured before the date of its publication.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17106-2:2021(Main)
Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines
SIST EN 17106-2:2021

This document together with EN 17106 1:2021 deals with all significant hazards, hazardous situations and events relevant to road surface cleaning machines (as defined in EN 15429 1:2007 and EN 17106 1:2021, 3.7) when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 17106 1:2021. This document does not repeat the requirements from EN 17106 1:2021 but supplements or modifies the requirements for road surface cleaning machines.
This document is not applicable to road surface cleaning machines manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17106-4:2021(Main)
Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines
SIST EN 17106-4:2021

This European Standard applies to machines used for road service area maintenance which are attached to or mounted on carrier vehicles (e.g. tractor, truck), or which are self-propelled machinery and which are defined in Clause 3. Directives and standards for the vehicular truck or tractor chassis aspect, termed 'carrier vehicle' in this standard, would be those relevant to that equipment.
For machinery which are a combination of a grass/brush-cutting attachment and a carrier-vehicle, this part of the standard applies to the grass or brush cutting attachment itself and with all health and safety requirements of the interaction and effects between attachment and the carrier vehicle when used together (e.g. stability, visibility).
For self-propelled machinery, this part only deals with health and safety requirements of the attachment itself and does not deal with the self-propelled machinery itself which are dealt with in EN 17106 1.
NOTE 1   Road regulations or Directive apply to vehicular truck and tractor.
NOTE 2   The use in public road traffic is governed by the national regulations.
This European Standard deals with all significant hazards identified through a risk assessment pertinent to road service area maintenance machines, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.
This European Standard does not include requirements for the carrier vehicles (e.g. trucks, tractors, construction machines, industrial trucks). These are covered in directives related to the construction of vehicles.
This European Standard does not deal with:
—   walker-operated and hand-held machines;
—   machines for the maintenance of sports grounds;
—   machines for agriculture, horticulture and forestry;
—   pit and sewer cleaning vehicles/-machines;
—   grass and brush cutting machines with multiple cutting heads (see Annex A, Clause C.2, Figure C.20)
—   vertical axis grass and brush cutting machines except inter-post machinery (see Annex A, Clause C.2, Figure C.22)
—   horizontal axis grass and brush cutting machines with two rotors (see Annex A, Clause C.2, Figure C.23)
—   self-propelled remote controlled machinery for road service area maintenance, except the mowing head
—   self-propelled remote controlled machinery used for forestry application (see Annex A, Clause C.2, Figure C.21)
—   cleansing and ditch maintenance machines (see Annex A, Clause C.2, Figure C.24 and C.25)
A machine which is a combination of several parts with different uses should conform to all the standards referring to the corresponding parts of the machine.
This document, together with part 1, deals with all significant hazards for road service area maintenance machines – grass and brush cutting machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in prEN 17106 1:2017.
This document does not repeat the requirements from prEN 17106 1:2017, but adds or replaces the requirements for application for grass and brush cutting machines.
This European Standard does not deal with the risks associated with the operation of machines in potentially explosive atmospheres.
This standard applies to machines manufactured after the date of approval of this standard through CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17106-3-1:2021(Main)
Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs
SIST EN 17106-3-1:2021

This document together with EN 17106 1:2021 deals with all significant hazards, hazardous situations and events relevant to winter service machines – snow clearing machines with rotating tools and snow ploughs when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 17106 1:2021. This document does not repeat the requirements from EN 17106 1:2021 but supplements or modifies the requirements for winter service machines – snow clearing machines with rotating tools and snow ploughs.
This document is not applicable to snow clearing machines with rotating tools and snow ploughs manufactured before the date of its publication.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17106-2:2021(Main)
Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines
SIST EN 17106-2:2021

This document together with EN 17106 1:2021 deals with all significant hazards, hazardous situations and events relevant to road surface cleaning machines (as defined in EN 15429 1:2007 and EN 17106 1:2021, 3.7) when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 17106 1:2021. This document does not repeat the requirements from EN 17106 1:2021 but supplements or modifies the requirements for road surface cleaning machines.
This document is not applicable to road surface cleaning machines manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17106-4:2021(Main)
Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines
SIST EN 17106-4:2021

This European Standard applies to machines used for road service area maintenance which are attached to or mounted on carrier vehicles (e.g. tractor, truck), or which are self-propelled machinery and which are defined in Clause 3. Directives and standards for the vehicular truck or tractor chassis aspect, termed 'carrier vehicle' in this standard, would be those relevant to that equipment.
For machinery which are a combination of a grass/brush-cutting attachment and a carrier-vehicle, this part of the standard applies to the grass or brush cutting attachment itself and with all health and safety requirements of the interaction and effects between attachment and the carrier vehicle when used together (e.g. stability, visibility).
For self-propelled machinery, this part only deals with health and safety requirements of the attachment itself and does not deal with the self-propelled machinery itself which are dealt with in EN 17106 1.
NOTE 1   Road regulations or Directive apply to vehicular truck and tractor.
NOTE 2   The use in public road traffic is governed by the national regulations.
This European Standard deals with all significant hazards identified through a risk assessment pertinent to road service area maintenance machines, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.
This European Standard does not include requirements for the carrier vehicles (e.g. trucks, tractors, construction machines, industrial trucks). These are covered in directives related to the construction of vehicles.
This European Standard does not deal with:
—   walker-operated and hand-held machines;
—   machines for the maintenance of sports grounds;
—   machines for agriculture, horticulture and forestry;
—   pit and sewer cleaning vehicles/-machines;
—   grass and brush cutting machines with multiple cutting heads (see Annex A, Clause C.2, Figure C.20)
—   vertical axis grass and brush cutting machines except inter-post machinery (see Annex A, Clause C.2, Figure C.22)
—   horizontal axis grass and brush cutting machines with two rotors (see Annex A, Clause C.2, Figure C.23)
—   self-propelled remote controlled machinery for road service area maintenance, except the mowing head
—   self-propelled remote controlled machinery used for forestry application (see Annex A, Clause C.2, Figure C.21)
—   cleansing and ditch maintenance machines (see Annex A, Clause C.2, Figure C.24 and C.25)
A machine which is a combination of several parts with different uses should conform to all the standards referring to the corresponding parts of the machine.
This document, together with part 1, deals with all significant hazards for road service area maintenance machines – grass and brush cutting machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in prEN 17106 1:2017.
This document does not repeat the requirements from prEN 17106 1:2017, but adds or replaces the requirements for application for grass and brush cutting machines.
This European Standard does not deal with the risks associated with the operation of machines in potentially explosive atmospheres.
This standard applies to machines manufactured after the date of approval of this standard through CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day