EN 10330:2015
(Main)Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
This European Standard specifies the method of measurement of the coercivity of magnetic materials in an open magnetic circuit.
It applies to magnetic materials having a coercivity up to 500 kA/m. Special precautions to take in measuring coercivities below 40 A/m and above 160 kA/m are given in Annex A.
Magnetische Werkstoffe - Verfahren zur Messung der Koerzivität magnetischer Werkstoffe in einem offenen Magnetkreis
Diese Europäische Norm legt das Verfahren zur Messung der Koerzivität magnetischer Werkstoffe in einem offenen Magnetkreis fest.
Die Norm gilt für magnetische Werkstoffe mit einer Koerzivität bis 500 kA/m. Besondere Vorkehrungen müssen bei Messungen von Koerzivitäten unter 40 A/m und über 160 kA/m getroffen werden, siehe Anhang A.
Matériaux magnétiques - Méthode de mesure du champ coercitif des matériaux magnétiques en circuit magnétique ouvert
La présente Norme européenne spécifie la méthode de mesure du champ coercitif des matériaux magnétiques dans un circuit magnétique ouvert.
Elle s’applique aux matériaux magnétiques possédant un champ coercitif inférieur ou égal à 500 kA/m. Les précautions particulières à prendre dans le cas des champs coercitifs inférieurs à 40 A/m et supérieurs à 160 kA/m sont données dans l’annexe A.
Magnetni materiali - Metode za merjenje koercitivnosti magnetnih materialov v odprtem magnetnem krogu
Ta evropski standard določa metodo za merjenje koercitivnosti magnetnih materialov v odprtem magnetnem krogu.
Uporablja se za magnetne materiale s koercitivnostjo do 500 kA/m. Posebni previdnostni ukrepi, ki ji je treba upoštevati pri merjenju koercitivnosti pod 40 A/m in nad 160 kA/m, so navedeni v dodatku A.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Magnetni materiali - Metode za merjenje koercitivnosti magnetnih materialov v odprtem magnetnem kroguMagnetische Werkstoffe - Verfahren zur Messung der Koerzivität magnetischer Werkstoffe im offenen MagnetkreisMatériaux magnétiques - Méthode de mesure du champ coercitif des matériaux magnétiques en circuit magnétique ouvertMagnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit29.030Magnetni materialiMagnetic materialsICS:Ta slovenski standard je istoveten z:EN 10330:2015SIST EN 10330:2015en,fr,de01-oktober-2015SIST EN 10330:2015SLOVENSKI
STANDARDSIST EN 10330:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10330
August 2015 ICS 29.030 Supersedes EN 10330:2003English Version
Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
Matériaux magnétiques - Méthode de mesure du champ coercitif des matériaux magnétiques en circuit magnétique ouvert
Magnetische Werkstoffe - Verfahren zur Messung der Koerzivität magnetischer Werkstoffe in einem offenen Magnetkreis This European Standard was approved by CEN on 23 July 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10330:2015 ESIST EN 10330:2015
Precautions to be taken for measurements of coercivity below 40 A/m and above 160 kA/m . 10 A.1 Coercivities below 40 A/m . 10 A.2 Coercivities above 160 kA/m . 10 Bibliography . 11
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.