iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1152:1994

(Main)

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests

This European Standard specifies the test methods and acceptance criteria for determining resistance against wear, robustness and durability of non rotating guards for power take-off (PTO) drive shafts as defined in clause 2.  Pending the results of work being conducted in CEN on this subject matter, the requirements and test methods relative to the ultraviolet radiation resistance of such guards when they are manufactured in plastics materials are not dealt with in this standard.  Such equipment is part of world-wide trade, which implies re-export of PTO drive-shafts to countries with extreme temperature, therefore a temperature of - 35 øC has been specified for some tests.

Traktoren und Maschinen für die Land- und Forstwirtschaft - Schutzeinrichtungen für Gelenkwellen - Verschleißprüfungen und Festigkeitsprüfungen

Diese Europäische Norm legt die Prüfmethoden und Annahme Kriterien an die Widerstandsfähigkeit gegenüber Verschleiss, Robustheit sowie Haltbarkeit von nicht umlaufenden Schutzeinrichtungen bei Gelenkwellen für den Zapfwellenantrieb fest, wie in Abschnitt 2 definiert.

Tracteurs et matériels agricoles et forestiers - Protecteur d'arbres de transmission à cardans de prise de force - Essai d'usure et de résistance

La présente norme européenne spécifie les méthodes d'essais et les critères d'acceptabilité permettant de déterminer la résistance à l'usure, la robustesse et la durabilité des protecteurs non toumants d'arbres de transmission à cardans de prise de force, tels que définis à l'article 2.

Traktorji, kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskus obrabe in trdnosti

General Information

Status
Withdrawn
Publication Date
19-Jun-1994
Withdrawal Date
29-Feb-2004
ICS
65.060.10 - Agricultural tractors and trailed vehicles
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 1 - General safety requirements
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Mar-2004
Completion Date
01-Mar-2004
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
SIST EN 1152:1995 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests

Relations

Replaced By
EN ISO 5674:2006 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
Effective Date
22-Dec-2008
Corrected By
EN 1152:1994/AC:1998 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests
Effective Date
22-Dec-2008
Replaced By
EN ISO 5674:2004 - Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004)
Effective Date
22-Dec-2008

Buy Standard

EN 1152:1995EN 1152:1995
PreviousNext
Standard
EN 1152:1995
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Traktoren und Maschinen für die Land- und Forstwirtschaft - Schutzeinrichtungen für Gelenkwellen - Verschleißprüfungen und FestigkeitsprüfungenTracteurs et matériels agricoles et forestiers - Protecteur d'arbres de transmission a cardans de prise de force - Essai d'usure et de résistanceTractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and stre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1853:2017+AC:2019(Main + Amendment)
Agricultural machinery - Trailers - Safety
SIST EN 1853:2018+AC:2019

This European Standard specifies safety requirements and their verification for the design and construction of trailers with a tipping body, balanced or semi-mounted, used in agriculture, as defined in 3.1. It includes also hook-lift trailers and trailers with conveyor device as defined in 3.9.
This European Standard does not deal with trailers equipped with pick-up devices and/or rear spreading devices.
Trailers with a load push/push-off device, slats or alternating moving floor may be removed from this standard, provided a new work item on loader wagons and forage transport wagons (prEN ISO 4254-17) is accepted.
This European Standard does not give Required Performance Levels for the identified safety functions.
This European Standard, taken together with EN ISO 4254-1, deals with the significant hazards, hazardous situations and events relevant to agricultural trailers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table A.1), excepting the hazards arising from:
-   hazards related to conveying devices other than those defined in 3.9.1 and 3.9.2, for example load push/push-off device;
-   hazards related to the environment and road safety;
-   hazards related to braking.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This document is not applicable to trailers which are manufactured before the date of its publication as EN.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15695-2:2017(Main)
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
SIST EN 15695-2:2017

This European Standard is applicable to filters as part of cabs of categories 2, 3 and 4 of agricultural and forestry tractors and self-propelled sprayers as specified in EN 15695 1 in order to limit the exposure of the operator (driver) to hazardous substances, in agricultural and forestry operations. It specifies requirements, test procedures and the information to be provided by the filter manufacturer.
This standard does not cover:
-   the exposure linked to fumigants;
-   the category of cab and performance level to be used for any particular application;
-   the actual cab performance in the field applications;
-   field durability of filters or filtration systems.
This document is not applicable to filters which are manufactured before the date of its publication as EN.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16944:2017(Main)
Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
SIST EN 16944:2017

This European Standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regulation 167/2013 and its Delegated Acts with the objectives to allow the fair competition between manufacturers and between operators and to improve the competitiveness and future viability of companies with special regard to Small and Medium-sized Enterprises (SME).
This European Standard is applicable to agricultural and forestry vehicles approved (respectively to be approved) in accordance with the EU Regulation 167/2013.
This European Standard is not applicable to small series vehicles.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15695-1:2017(Main)
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures
SIST EN 15695-1:2017

This European Standard is applicable to cabs of agricultural and forestry tractors and self-propelled sprayers. Its purpose is to limit the exposure of the operator (driver) to hazardous substances when applying plant protection products (PPP) and liquid fertilisers. This European Standard specifies different categories of cabs of agricultural and forestry tractors and self-propelled sprayers and the relevant requirements and test procedures in order to limit the exposure of the operator (driver) to hazardous substances when inside the cab. It also specifies the information to be provided by the tractor or self-propelled sprayer manufacturer.
This document does not cover:
-   the exposure linked to fumigants;
-   the category of cab and performance level to be used for any particular application;
-   the actual cab performance in the field applications;
-   the field durability of filters.
This document is not applicable to tractor cabs which are manufactured before the date of its publication as an EN.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16230-1:2015(Main)
Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
SIST EN ISO 16230-1:2015

ISO 16230-1:2015 is applicable to tractors and self-propelled ride-on machines, mounted implements, and towed implements used in agriculture and forestry. This part of ISO 16230 specifies general requirements that relate to the protection and safety of operators and bystanders on machines with on-board voltages in the range of 50 V AC to 1000 V AC and 75 V DC to 1500 V DC. This part of ISO 16230 applies to electrical equipment and parts of the electrical equipment on such machines and includes general requirements related to the protection and safety of operators, bystanders, and first responders.
ISO 16230-1:2015 deals with significant hazards, hazardous situations, and events, as listed in Annex A, relevant to this agricultural machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
ISO 16230-1:2015 is not applicable to the following:
-      specific design elements of external interfaces (e.g. the interface between a tractor and implement);
-      externally powered equipment (e.g. line powered equipment, equipment without on-board power generation);
-      purpose built forestry machines;
-      stationary electrical generators.
ISO 16230-1:2015 is not applicable to machines which are manufactured before the date of its publication.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16231-2:2015(Main)
Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)
SIST EN ISO 16231-2:2015

ISO 16231-2:2015 specifies a method to determine the centre of gravity of un-laden self-propelled machines, a method to determine the centre of gravity of laden machines and combinations with attachments, and methods to determine the static overturning angle.
NOTE          Requirements related to self-protective structures and ROPS are to be dealt with in a separate International Standard.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15694:2009+A1:2015(Main + Amendment)
Agricultural and forestry tractors - Passenger seat - Requirements and test procedures
SIST EN 15694:2012+A1:2016

This standard is applicable to agricultural and forestry tractors on which provision is made for carrying one person in addition to the driver. It specifies minimum requirements for space and support, specifies roll-over protective structures (ROPS) test procedures and seat belt requirements, by reference to other standards.
It also specifies the information to be provided by the tractor manufacturer.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16231-1:2013(Main)
Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)
SIST EN ISO 16231-1:2013

ISO 16231-1:2013 specifies principles for the assessment of stability with respect to the design and construction of self-propelled ride-on machines used in agriculture and the hazard of rolling over or tipping over, or both when the machine is used as intended and under the conditions foreseeable by the manufacturer. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 16231-1:2013 is not applicable to
?       machines with an unladen mass lower than 400 kg;
?       machines covered by other machine specific standards dealing with the protection against rollover and tip-over (e.g. agricultural tractors, forestry tractors);
?       hazards associated with road transport operations;
?       free fall events;
?       rollover as a result of impact collisions.
ISO 16231-1:2013 is not applicable to machines manufactured before the date of its publication.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16246:2012(Main)
Agricultural machinery - Backhoes - Safety
SIST EN 16246:2013

This European Standard, when used together with EN ISO 4254-1 and EN 15811, specifies the safety requirements and their verification for the design and construction of hydraulic backhoes mounted to the three point linkage of a tractor. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according to the provisions of this document.
This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events (as listed in Table 1) relevant to hydraulic backhoes mounted to the three point linkage of a tractor, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer.
This European Standard is not applicable to lifting operations for the movement of unit loads with hooks or other similar devices; materials connected with excavation activities shall should not be intended as unit loads and their movement is covered by this Standardstandard.
This European Standard does not give requirements for quick hitch devices.
NOTE 1   An amendment of EN 474-1 is under preparation to deal with this issue. It will be evaluated for inclusion in this European Standard.
NOTE 2   Specific requirements related to road traffic regulations are not taken into account in this European Standard.
This European Standard is not applicable to hydraulic backhoes which are manufactured before the date of its publication as EN.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 709:1997+A4:2009/AC:2012(Corrigendum)
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
SIST EN 709:1998+A4:2010/AC:2013

CEN/TC 144 - Modification to one Figure in 5.7.2.1.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day