EN ISO 15547-2:2005

Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005)

ISO 15547-2:2005 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries.

Erdöl-, petrochemische und Erdgasindustrie - Plattenwärmetauscher - Teil 2: Gelötete Rippen-Platten Wärmeaustauscher aus Aluminium (ISO 15547-2:2005)

Industries du pétrole, de la pétrochimie et du gaz naturel - Echangeurs thermiques à plaques - Partie 2: Echangeurs thermiques à plaques en aluminium brasé (ISO 15547-2:2005)

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina – Ploščni prenosniki toplote – 2. del: Lotani aluminijski narebreni ploščni prenosniki toplote (ISO 15547-2:2005)

General Information

• Status: Published
• Publication Date: 31-Oct-2005
• ICS: 27.060.30 - Boilers and heat exchangers
• ICS: 75.180.20 - Processing equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 01-Feb-2010
• Completion Date: 01-Feb-2010
• Ref Project: SIST EN ISO 15547-2:2006 - Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005)

Relations

• Replaces: EN ISO 15547:2001 - Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15547-2:2006
01-september-2006
1DGRPHãþD
SIST EN ISO 15547:2002
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD±
3ORãþQLSUHQRVQLNLWRSORWH±GHO/RWDQLDOXPLQLMVNLQDUHEUHQLSORãþQLSUHQRVQLNL
WRSORWH,62
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part
2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005)
Erdöl-, petrochemische und Erdgasindustrie - Plattenwärmetauscher - Teil 2: Gelötete
Rippen-Platten Wärmeaustauscher aus Aluminium (ISO 15547-2:2005)
Industries du pétrole, de la pétrochimie et du gaz naturel - Echangeurs thermiques a
plaques - Partie 2: Echangeurs thermiques a plaques en aluminium brasé (ISO 15547-
2:2005)
Ta slovenski standard je istoveten z: EN ISO 15547-2:2005
ICS:
71.120.30 Prenosniki toplote Heat exchangers
75.180.20 Predelovalna oprema Processing equipment
77.150.10 Aluminijski izdelki Aluminium products
SIST EN ISO 15547-2:2006 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15547-2:2006SIST EN ISO 15547-2:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 15547-2:2006SIST EN ISO 15547-2:2006
EUROPEAN STANDARD
EN ISO 15547-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 27.060.30; 75.180.20 Supersedes EN ISO 15547:2001
English Version
Petroleum, petrochemical and natural gas industries - Plate-type
heat exchangers - Part 2: Brazed aluminium plate-fin heat
exchangers (ISO 15547-2:2005)
Industries du pétrole, de la pétrochimie et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie -
Echangeurs thermiques à plaques - Partie 2: Echangeurs Plattenwärmetauscher - Teil 2: Gelötete Rippen-Platten
thermiques à plaques en aluminium brasé (ISO 15547- Wärmeaustauscher aus Aluminium (ISO 15547-2:2005)
2:2005)
This European Standard was approved by CEN on 28 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15547-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15547-2:2006SIST EN ISO 15547-2:2006

EN ISO 15547-2:2005 (E)





Foreword


This document (EN ISO 15547-2:2005) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2006, and conflicting national standards
shall be withdrawn at the latest by May 2006.

This document supersedes EN ISO 15547:2001.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 15547-2:2005 has been approved by CEN as EN ISO 15547-2:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15547-2:2006SIST EN ISO 15547-2:2006


INTERNATIONAL ISO
STANDARD 15547-2
First edition
2005-11-01

Petroleum, petrochemical and natural gas
industries — Plate-type heat
exchangers —
Part 2:
Brazed a
...