EN ISO 4613-2:1995/A1:2004
(Amendment)Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
Kunststoffe - Ethylen-Vinylacetat (E/VAC)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften - Änderung 1 (ISO 4613-2:1995/DAM 1:2004)
Plastiques - Ethylène/acétate de vinyle (E/VAC) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés - Amendement 1 (ISO 4613-2:1955/Amd 1:2004)
Polimerni materiali – Materiali za oblikovanje in ekstrudiranje iz kopolimera etilen/vinil acetata – 2. del: Priprava preskušancev in ugotavljanje lastnosti - Dopolnilo A1 (ISO 4613-2:1995/Amd 1:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4613-2:1999/A1:2004
01-oktober-2004
Polimerni materiali – Materiali za oblikovanje in ekstrudiranje iz kopolimera
etilen/vinil acetata – 2. del: Priprava preskušancev in ugotavljanje lastnosti -
Dopolnilo A1 (ISO 4613-2:1995/Amd 1:2004)
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2:
Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613
-2:1995/Amd 1:2004)
Kunststoffe - Ethylen-Vinylacetat (E/VAC)-Formmassen - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften - Änderung 1 (ISO 4613-2:1995/DAM
1:2004)
Plastiques - Ethylene/acétate de vinyle (E/VAC) pour moulage et extrusion - Partie 2:
Préparation des éprouvettes et détermination des propriétés - Amendement 1 (ISO 4613
-2:1955/Amd 1:2004)
Ta slovenski standard je istoveten z: EN ISO 4613-2:1995/A1:2004
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 4613-2:1999/A1:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4613-2:1999/A1:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 4613-2:1999/A1:2004
EUROPEAN STANDARD
EN ISO 4613-2:1995/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2004
ICS 83.080.20
English version
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion
materials - Part 2: Preparation of test specimens and
determination of properties - Amendment 1 (ISO 4613-
2:1995/Amd 1:2004)
Plastiques - Ethylène/acétate de vinyle (E/VAC) pour
moulage et extrusion - Partie 2: Préparation des
éprouvettes et détermination des propriétés - Amendement
1 (ISO 4613-2:1955/Amd 1:2004)
This amendment A1 modifies the European Standard EN ISO 4613-2:1995; it was approved by CEN on 1 June 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4613-2:1995/A1:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4613-2:1999/A1:2004
EN ISO 4613-2:1995/A1:2004 (E)
Foreword
This document (EN ISO 4613-2:1995/A1:2004) has been prepared by Technical Committee
ISO/TC 61 "Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the
secretariat of which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2004, and conflicting national
standards shall be withdrawn at the latest by December 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 4613-2:1995/Amd 1:2004 has been approved by CEN as EN ISO 4613-
2:1995/A1:2004 without any modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4613-2:1999/A1:2004
INTERNATIONAL ISO
STANDARD 4613-2
Second edition
1995-08-15
AMENDMENT 1
2004-06-15
Plastics — Ethylene/vinyl acetate (E/VAC)
moulding and extrusion materials —
Part 2:
Preparation of test specimens and
determination of properties
AMENDMENT 1
Plastiques — Éthylène/acétate de vinyle (E/VAC) pour moulage et
extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés
AMENDEMENT 1
Reference number
ISO 4613-2:1995/Amd.1:2004(E)
©
ISO 2004
---------------------- Page: 5 ----------------------
SIST EN ISO 461
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.