EN 14307:2009/FprA1

Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 °C to + 75 °C.
The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.
This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.
Products with a declared thermal conductivity greater than 0,060 W/(m.K) at a mean temperature of 10 °C are not covered by this standard.
This standard does not cover products intended to be used for the insulation of the building structure nor for acoustical insulation.

Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en mousse de polystyrène extrudé (XPS) - Spécification

No scope available.

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija

General Information

• Status: Not Published
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 10 - Building equipment and industrial installations
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 10-Oct-2012
• Due Date: 01-Sep-2013
• Completion Date: 10-Oct-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: SIST EN 14307:2010/kFprA1:2012 - Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification

Relations

• Merged Into: EN 14307:2009+A1:2013 - Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
• Effective Date: 18-Jan-2023
• Amends: EN 14307:2009 - Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
• Effective Date: 21-Dec-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14307:2010/kFprA1:2012
01-julij-2012
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made extruded polystyrene foam (XPS) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus extrudiertem
Polystyrolschaum (XPS) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Produits manufacturés en mousse de polystyrène extrudé (XPS) -
Spécification
Ta slovenski standard je istoveten z: EN 14307:2009/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 14307:2010/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14307:2010/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 14307:2010/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 14307:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2012
ICS 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Factory made extruded polystyrene foam (XPS)
products - Specification
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die technische Gebäudeausrüstung
et les installations industrielles - Produits manufacturés en
und für betriebstechnische Anlagen in der Industrie -
mousse de polystyrène extrudé (XPS) - Spécification Werkmäßig hergestellte Produkte aus extrudiertem
Polystyrolschaum (XPS) - Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 88.

This draft amendment A1, if approved, will modify the European Standard EN 14307:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14307:2009/FprA1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14307:2010/kFprA1:2012
EN 14307:2009/FprA1:2012 (E)
Contents Page
Foreword .3
1 Modification to ZA.1, Scope and relevant characteristics .4
2 Modification to ZA.2, Procedures for attestation of conformity of factory made extruded
polystyrene foam products .4

2

---------------------- Page: 4 ----------------------

SIST EN 14307:2010/kFprA1:2012
EN 14307:2009/FprA1:2012 (E)
Foreword
This document (EN 14307:2009/FprA1:2012) has been prepared by Technical Committee CEN/TC 88
“Thermal insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Direc
...