iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 17573-3

(Main)

Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary (ISO/DIS 17573-3:2024)

Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary (ISO/DIS 17573-3:2024)

This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of semantics are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
—     ASN.1 (data) types within the fields of EFC;
—     ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the financial sector, etc.

Elektronische Gebührenerhebung - Systemarchitektur für fahrzeugbezogene Maut - Teil 3: Datendefinition (ISO/DIS 17573-3:2024)

Perception de télépéage - Architecture de systèmes pour le péage lié aux véhicules - Partie 3: Dictionnaire de données (ISO/DIS 17573-3:2024)

Le présent document spécifie la syntaxe et la sémantique des objets de données dans le domaine de la perception de télépéage (EFC). Les définitions des types de données et l’attribution de la sémantique sont fournis en accord avec la technique de notation de syntaxe abstraite numéro un (ASN.1), comme cela est spécifié dans l’ISO/IEC 8824-1. Ce document définit:
—     les types (de données) de l’ASN.1 au sein des domaines de la perception de télépéage;
—     les types (de données) de l’ASN.1 plus généraux employés plus spécifiquement dans les normes relatives à la perception de télépéage.
Le présent document ne vise pas à définir les types (de données) de l’ASN.1 qui se rapportent en premier lieu à d’autres domaines opérant en conjonction avec la perception de télépéage, tels que les systèmes de transport intelligents coopératifs (C-ITS), le secteur de la finance, etc.

Elektronsko pobiranje pristojbin - Sistemska arhitektura za cestninjenje vozil - 3. del: Podatkovni slovar (ISO/DIS 17573-3:2024)

General Information

Status
Not Published
Publication Date
05-Oct-2025
Technical Committee
CEN/TC 278 - Road transport and traffic telematics
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
07-Mar-2024
Completion Date
07-Mar-2024
Ref Project
oSIST prEN ISO 17573-3:2024 - Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary (ISO/DIS 17573-3:2024)

Relations

Revises
EN ISO 17573-3:2023 - Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary (ISO 17573-3:2023)
Effective Date
15-Nov-2023

Buy Standard

prEN ISO 17573-3:2024prEN ISO 17573-3:2024
PreviousNext
Draft
prEN ISO 17573-3:2024
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 17573-3:2024
01-maj-2024
Elektronsko pobiranje pristojbin - Sistemska arhitektura za cestninjenje vozil - 3.
del: Podatkovni slovar (ISO/DIS 17573-3:2024)
Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data
dictionary (ISO/DIS 17573-3:2024)
Elektronische Gebührenerhebung - Systemarchitektur für fahrzeugbezogene Maut - Teil
3: Datendefinition (ISO/DIS 17573-3:2024)
Perception de télépéage - Architecture de systèmes pour le péage lié aux véhicules -
Partie 3: Dictionnaire de données (ISO/DIS 17573-3:2024)
Ta slovenski standard je istoveten z: prEN ISO 17573-3
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
oSIST prEN ISO 17573-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17573-3:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17573-3:2024
DRAFT
International
Standard
ISO/DIS 17573-3
ISO/TC 204
Electronic fee collection — System
Secretariat: ANSI
architecture for vehicle-related
Voting begins on:
tolling —
2024-03-08
Part 3:
Voting terminates on:
2024-05-31
Data dictionary
Perception de télépéage — Architecture de systèmes pour le
péage lié aux véhicules —
Partie 3: Dictionnaire de données
ICS: 35.240.60; 03.220.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 17573-3:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17573-3:2024
DRAFT
ISO/DIS 17573-3:2024(en)
International
Standard
ISO/DIS 17573-3
ISO/TC 204
Electronic fee collection — System
Secretariat: ANSI
architecture for vehicle-related
Voting begins on:
tolling —
Part 3:
Voting terminates on:
Data dictionary
Perception de télépéage — Architecture de systèmes pour le
péage lié aux véhicules —
Partie 3: Dictionnaire de données
ICS: 35.240.60; 03.220.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 17573-3:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17573-3:2024
ISO/DIS 17573-3:2024(en)
Contents Page
Foreword .vi
Introduction .vii
1 Scope .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5832-1:2024(Main)
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2024)
SIST EN ISO 5832-1:2024

This document specifies the characteristics of, and corresponding test methods for, wrought stainless steel for use in the manufacture of surgical implants.
NOTE 1       The mechanical properties of a sample obtained from a finished product made of this alloy can differ from those specified in this document.
NOTE 2       The alloy described in this document corresponds to UNS S31673 in ASTM F138 and ASTM F139.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16451:2024(Main)
Railway applications - Braking - Brake pad holder
SIST EN 16451:2024

This document defines requirements for the brake pad holders with which the heavy rail vehicles and urban rail vehicles are fitted.
This document is applicable to the brake pad holders made from ferrous materials e.g. cast iron, cast steel or forged steel.
This document is not applicable for brake pad holders made of non-ferrous materials.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1482-4:2024(Main)
Fertilizers, liming materials and inhibitors - Sampling and sample preparation - Part 4: Sampling for microbial presence
SIST EN 1482-4:2024

This document specifies the method for taking a sample of solid and liquid forms of organic fertilizers, organo-mineral fertilizers and inorganic fertilizers containing more than 1 % by mass of organic carbon, when in packages, containers or in bulk, to test for levels of controlled pathogens present.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12368:2024(Main)
Traffic control equipment - Signal heads
kSIST FprEN 12368:2023

This document applies to signal heads with one or more signal lights of the colours red, yellow and/or green signal lights for road traffic with 200 mm and 300 mm roundels and to optical units to be integrated in signal heads to produce the individual signal lights. It defines the product characteristics for the visual, structural, environmental performances and testing of signal heads and optical units for pedestrian and road traffic use, and the rules for the evaluation of the conformity of these products.
This document can be partly or fully applied on a voluntary basis to other signal heads outside of the scope specified above like for instance white optical units or small signal heads with a diameter smaller than 200 mm.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1570-1:2024(Main)
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landing
kSIST FprEN 1570-1:2022

1.1   This document specifies the safety requirements for lifting tables with the following characteristics:
-   serving no more than 2 fixed landings but able to pass a fixed landing and,
-   having a vertical travel speed of no more than 0,15 m/s, unless safe by position and,
-   for raising or lowering goods (with or without operator(s) and/or authorized person(s)), or;
-   for raising or lowering operator(s) and/or authorized person(s) with or without goods, to positions where they can carry out work from a fixed or movable lifting table that is guided throughout its vertical travel only (see Annex H).
1.2   This document specifies the appropriate technical measures for eliminating and reducing the risks arising from the significant hazards listed in Annex B.
1.3   This document does not apply to the following equipment:
-   lifting tables with a vertical travel speed exceeding 0,15 m/s, unless safe by position;
-   lifting tables, serving more than 2 fixed landings of a construction, for lifting goods, with a vertical travel speed not exceeding 0,15 m/s (EN 1570-2:2016);
-   lifting tables, serving more than 2 fixed landings of a construction, for lifting operators, with a vertical travel speed not exceeding 0,15 m/s;
-   lifting tables carrying operators and installed in full enclosures with a vertical travel speed not exceeding 0,15 m/s;
-   lifting tables used on ships;
-   lifting tables designed for artists and stage set features during artistic performances (EN 17206:2020);
-   power operated lifting platforms for persons with impaired mobility (EN 81-41:2010);
-   mobile lifting tables for airport ground support equipment (EN 1915-2:2001+A1:2009 and EN 12312-1:2013);
-   mobile elevating work platforms (EN 280-1:2022);
-   static Group B elevating work platforms (EN 280-1:2022);
-   vehicle servicing lifts (EN 1493:2022);
-   mobile lifting tables used for firefighting (EN 1777:2010);
-   mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s;
-   rail dependent storage and retrieval equipment (EN 528:2021+A1:2022);
-   scissor lift pallet trucks (EN ISO 3691-5:2015, including EN ISO 3691-5:2015/AC:2016 and EN ISO 3691-5:2015/A1:2020);
-   lifting tables suspended from a ceiling.
1.4   This document does not consider the additional requirements for:
-   electromagnetic compatibility;
-   operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres, mines);
-   handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, particularly brittle loads, loose loads (gravel, tubes));
-   hazards occurring during construction, transportation, and disposal;
-   equipment installed on the load platform or the replacing or maintaining of it;
-   integration into broader systems or other machines, etc.;
-   cable-less controls, i.e. wireless;
-   lifting tables where the hydraulic pressure is derived directly from gas pressure;
-   lifting tables powered by internal combustion engines.

  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7965-1:2024(Main)
Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024)
kSIST FprEN ISO 7965-1:2024

This document specifies a method of vertical impact testing on a filled paper sack by dropping. It is performed either as a single test to investigate the effects of vertical impact or as part of a sequence of tests designed to measure the ability of a sack to withstand a distribution system that includes a vertical impact hazard.
This document specifies the testing procedure and how the results of tests are presented. It is based on ISO 2248 but is specifically related to paper sacks.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10297:2024(Main)
Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2024)
kSIST FprEN ISO 10297:2024

This document specifies design, type testing and marking requirements for:
a)       cylinder valves intended to be fitted to refillable transportable gas cylinders;
b)       main valves (excluding ball valves) for bundles of cylinders;
c)        cylinder valves or main valves with integrated pressure regulator (VIPR);
NOTE 1        This includes the following specific VIPR designs where:
1)  The pressure regulating system is acting as the primary valve operating mechanism (VIPR type B). This also includes designs where closure of the primary valve operating mechanism is obtained by closing the seat of the pressure regulating mechanism.
2)  The primary valve operating mechanism is located at the low-pressure side of the pressure regulating system (VIPR type C).
d)       valves for pressure drums and tubes;
which convey compressed, liquefied or dissolved gases.
NOTE 2        Where there is no risk of ambiguity, cylinder valves, main valves, VIPRs and valves for pressure drums and tubes are addressed with the collective term “valves” within this document.
This document does not apply to
—     valves for cryogenic equipment, portable fire extinguishers and liquefied petroleum gas (LPG);
—     quick-release cylinder valves (e.g. for fire-extinguishing, explosion protection and rescue applications) - requirements for quick-release cylinder valves are specified in ISO 17871 which contains normative references to this document;
—     self-closing cylinder valves and ball valves.
NOTE 3        Requirements for valves for cryogenic vessels are specified in ISO 21011 and at a regional level, e.g. in EN 1626. Requirements for LPG valves are specified in ISO 14245 or ISO 15995. Requirements for self-closing cylinder valves are specified in ISO 17879. Requirements for ball valves are specified in ISO 23826. Requirements for valves for portable fire extinguishers at a regional level are specified, for example, in the EN 3 series.
This document only covers the function of a valve as a closure. Other functions that are possibly integrated in the valve can be covered by other standards. Such standards do however not constitute requirements according to this document.
NOTE 4        Definition of and specific requirements for VIPRs in addition to those that are given in this document are specified in ISO 22435 for industrial applications or ISO 10524-3 for medical applications. Similarly, certain specific requirements for residual pressure valves (RPV) with or without a non-return function in addition to those that are given in this document are given in ISO 15996.
NOTE 5        Certain specific requirements for valves for breathing apparatus in addition to those that are given in this document are specified at a regional level, for example, in the EN 144 series. Certain specific requirements for quick-release valves for fixed fire-fighting systems in addition to those that are given in this document are specified in ISO 16003 and at a regional level, for example, in EN 12094–4.
NOTE 6        Requirements for manufacturing tests and examinations of valves covered by this document are given in ISO 14246.

  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17929:2024(Main)
Hyperloop Transport Services
SIST EN 17929:2024

Hyperloop transport services are designed to support passenger transport and cargo transport. For each of the transport service user/customer requirements and expectations are different.
This document defines the hyperloop transport services supported by a hyperloop system and provides means for characterization and description of these services. The characterization considers the technical as well as operational / commercial features of each transport service.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14972-4:2024(Main)
Fixed firefighting systems - Water mist systems - Part 4: Test protocol for non-storage occupancies for automatic nozzle systems
SIST EN 14972-4:2024

This document specifies the evaluation of the fire performance of water mist systems for lightly loaded non-storage and non-manufacturing occupancies with ordinary combustibles, such as offices, schools, hospitals and hotels.
This document is applicable to ceiling mounted and sidewall automatic nozzles to be used in restricted and/or unlimited areas.
This document is applicable for horizontal, solid, flat ceilings with heights of 2 m and above, up to the maximum tested ceiling height.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-3:2024(Main)
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2024)
SIST EN ISO 5667-3:2024

This document specifies the general requirements for sampling, preservation, handling, transport and storage of all water samples for physicochemical, chemical, hydrobiological and microbiological analyses and determination of radiochemical analytes and activities.
Guidance on the validation of storage times of water samples is provided in ISO/TS 5667-25.
This document is not applicable to water samples intended for ecotoxicological assays, biological assays (which is specified in ISO 5667-16), passive sampling (which is specified in ISO 5667-23) and microplastics (which is specified in ISO 5667-27).
This document is particularly appropriate when samples cannot be analysed on site and have to be transported to a laboratory for analysis.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day