EN 16012:2012/FprA1
(Amendment)Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
This standard describes a set of procedures for using existing standardized CEN or ISO test and calculation methods to determine the declared thermal performance of reflective insulation products. This standard supports and does not replace existing CEN or ISO test methods.This standard applies to any thermal insulation product that derives a proportion of its claimed thermal properties from the presence of one or more reflective or low emissivity surfaces together with any associated airspace(s). It does not replace the existing procedures for the determination of the thermal performance of products already covered by an existing harmonized product standard where the declared value of these products does not specifically include any claims attributable to the emissivity of the facing.
Wärmedämmstoffe für Gebäude - Reflektierende Wärmedämm-Produkte - Bestimmung der Nennwerte der wärmetechnischen Eigenschaften
Isolation thermique des bâtiments - Produits d’isolation réfléchissants - Détermination de la performance thermique déclarée
Toplotnoizolacijski proizvodi za stavbe - Odsevni izolacijski proizvodi - Ugotavljanje nazivnih toplotnih lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16012:2012/kFprA1:2014
01-september-2014
Toplotnoizolacijski proizvodi za stavbe - Odsevni izolacijski proizvodi -
Ugotavljanje nazivnih toplotnih lastnosti
Thermal insulation for buildings - Reflective insulation products - Determination of the
declared thermal performance
Wärmedämmstoffe für Gebäude - Reflektierende Wärmedämm-Produkte - Bestimmung
der Nennwerte der wärmetechnischen Eigenschaften
Isolation thermique des bâtiments - Produits d’isolation réfléchissants - Détermination de
la performance thermique déclarée
Ta slovenski standard je istoveten z: EN 16012:2012/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 16012:2012/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16012:2012/kFprA1:2014
---------------------- Page: 2 ----------------------
SIST EN 16012:2012/kFprA1:2014
EUROPEAN STANDARD
FINAL DRAFT
EN 16012:2012
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2014
ICS 91.100.60
English Version
Thermal insulation for buildings - Reflective insulation products -
Determination of the declared thermal performance
Isolation thermique des bâtiments - Produits d'isolation Wärmedämmstoffe für Gebäude - Reflektierende
réfléchissants - Détermination de la performance thermique Wärmedämm-Produkte - Bestimmung der Nennwerte der
déclarée wärmetechnischen Eigenschaften
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 89.
This draft amendment A1, if approved, will modify the European Standard EN 16012:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16012:2012/FprA1:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 16012:2012/kFprA1:2014
EN 16012:2012/FprA1:2014 (E)
Contents Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to 3.2 .4
3 Modifications to Clause 5 .4
3.1 Modification to 5.2, Thickness measurement .4
3.2 Modification to 5.3, Conditioning and specimen preparation .4
3.3 Modification to 5.4, Determination of thermal resistance – outline .4
4 Modifications to Clause 7 .5
4.1 Modification to 7.1, Results derived from hot plate and emissivity measurements
(Products Type 1 & 2) .5
4.2 Modification to 7.2, Res
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.