CEN/TS 15297:2006
(Main)Solid Biofuels - Determination of minor elements
Solid Biofuels - Determination of minor elements
This Technical Specification is intended for determination of the minor elements Arsenic, Cadmium, Cobalt, Chromium, Copper, Mercury, Manganese, Molybdenum, Nickel, Lead, Antimony, Vanadium and Zinc in all solid biofuels. Further it describes methods for sample decomposition and suggests suitable instrumental methods for the determination of the elements of interest in the digests. The determination of Selenium, Tin and Thallium is also possible with the method described in this Technical Specification.
Feste Biobrennstoffe - Bestimmung von Spurenelementen
Biocombustibles solides - Détermination des éléments mineurs
Trdna biogoriva – Določevanje manjših elementov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 15297:2006
01-maj-2006
7UGQDELRJRULYD±'RORþHYDQMHPDQMãLKHOHPHQWRY
Solid Biofuels - Determination of minor elements
Feste Biobrennstoffe - Bestimmung von Spurenelementen
Biocombustibles solides - Détermination des éléments mineurs
Ta slovenski standard je istoveten z: CEN/TS 15297:2006
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15297:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15297:2006
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15297:2006
TECHNICAL SPECIFICATION
CEN/TS 15297
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
March 2006
ICS 75.160.10
English Version
Solid Biofuels - Determination of minor elements
Biocombustibles solides - Détermination des éléments Feste Biobrennstoffe - Bestimmung von Spurenelementen
mineurs
This Technical Specification (CEN/TS) was approved by CEN on 22 November 2005 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15297:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15297:2006
CEN/TS 15297:2006 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Symbols and abbreviations .5
5 Principle.6
6 Reagents.6
7 Apparatus .7
8 Preparation of the test sample .7
9 Digestion.7
10 Detection methods.8
11 Calculations.8
12 Precision of the method.9
13 Test Report.9
Bibliography .10
2
---------------------- Page: 4 -------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.