prEN 103XY

General requirements for cold formed welded structural steel hollow sections

This part of prEN 10219 specifies the product characteristics, test methods and performance criteria for electric welded and submerged arc welded cold formed structural steel hollow sections of circular, square, rectangular or elliptical forms, produced without any subsequent heat treatment other than the heat treatment of the weld line.
Requirements for the technical delivery conditions are specified in prEN 10219-2 and for tolerances, dimensions and sectional properties in prEN 10219-3.
NOTE 1    prEN 10219-1 covers provision of the Construction Products Regulations (CPR) to fulfil European law for construction products. The technical delivery conditions are described within prEN 10219-2 in combination with Clauses 2, 3, 4, 5, 7 and 8 of prEN 10219-1.
NOTE 2   Hollow sections for offshore structures are covered in EN 10225.

Kaltgeformte geschweißte Hohlprofile für den Stahlbau - Teil 1: Allgemeines

Dieser Teil der Europäischen Norm legt die Erzeugnismerkmale, die Prüfverfahren und die Leistungskriterien für kaltgeformte elektrisch und unterpulvergeschweißte Hohlprofile für den Stahlbau mit kreisförmigem, quadratischem oder rechteckigem Querschnitt fest und gilt für Hohlprofile ohne nachfolgende Wärmebehandlung mit Ausnahme der Wärmebehandlung für die Schweißnaht.
Anforderungen bezüglich der Technischen Lieferbedingungen sind in EN 10219-2 und Anforderungen bezüglich der Grenzabmaße, Maße und statischen Werte sind in EN 10219-3 festgelegt.
ANMERKUNG 1    Teil 1 dieser Norm behandelt die Vorschriften der Bauproduktenverordnung (CPR) um die europäischen Gesetze bezüglich Bauprodukten zu erfüllen. Die technischen Lieferbedingungen sind in Teil 2 beschrieben und zwar im Zusammenhang mit den Abschnitten 2, 3, 4, 5, 7 und 8 dieses ersten Normenteils.
ANMERKUNG 2   Hohlprofile für Offshore-Konstruktionen werden in der Europäischen Norm EN 10225 behandelt.

Profils creux de construction soudés formés à froid en aciers - Partie 1 : Généralités

La présente partie de la prEN 10219 spécifie les caractéristiques de produit, les méthodes d’essai et les critères de performance pour les profils creux de construction formés à froid en aciers, soudés électriquement et soudés à l’arc immergé sous flux en poudre, de forme circulaire, carrée, rectangulaire ou elliptique, produits sans aucun traitement thermique ultérieur autre que le traitement thermique de la ligne de soudure.
Les exigences relatives aux conditions techniques de livraison sont spécifiées dans la prEN 10219-2 et les exigences relatives aux tolérances, dimensions et caractéristiques du profil sont spécifiées dans la prEN  10219-3.
NOTE 1   La prEN 10219-1 couvre les dispositions du Règlement Produits de Construction (RPC) permettant de satisfaire à la législation européenne sur les produits de construction. Les conditions techniques de livraison sont décrites dans la prEN 10219-2 en combinaison avec les Articles 2, 3, 4, 5, 7 et 8 de la prEN 10219-1.
NOTE 2   Les profils creux destinés aux structures marines sont traités dans l’EN 10225.

Hladno oblikovani varjeni votli konstrukcijski profili iz jekla - 1. del: Splošno

General Information

• Status: Not Published
• Publication Date: 17-Sep-2017
• Withdrawal Date: 18-Mar-2018
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 103/WG 3 - Hollow sections
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 07-Mar-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: oSIST prEN 10219-1:2016 - Cold formed welded structural steel hollow sections - Part 1: General

Relations

• Splited From: prEN 10219-1 rev - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
• Effective Date: 08-Mar-2023
• Revises: EN 10219-1:2006 - Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
• Effective Date: 07-Oct-2015

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 10219-1:2016
01-februar-2016
Hladno oblikovani varjeni votli konstrukcijski profili iz jekla - 1. del: Splošno
Cold formed welded structural steel hollow sections - Part 1: General
Kaltgeformte geschweißte Hohlprofile für den Stahlbau - Teil 1: Allgemeines
Profils creux de construction soudés formés à froid en aciers - Partie 1 : Généralités
Ta slovenski standard je istoveten z: prEN 10219-1
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
oSIST prEN 10219-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10219-1:2016

---------------------- Page: 2 ----------------------
oSIST prEN 10219-1:2016


DRAFT
EUROPEAN STANDARD
prEN 10219-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2016
ICS 77.140.75 Will supersede EN 10219-1:2006
English Version

Cold formed welded structural steel hollow sections - Part
1: General
Profils creux de construction soudés formés à froid en Kaltgeformte geschweißte Hohlprofile für den Stahlbau
aciers - Partie 1 : Généralités - Teil 1: Allgemeines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
ECISS/TC 103.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10219-1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10219-1:2016
prEN 10219-1:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
3.1 Terms and definitions . 5
3.2 Symbols . 6
4 Product characteristics . 6
4.1 Chemical composition (durability) . 6
4.2 Mechanical properties (yield strength, tensile strength, elongation and impact
strength) . 6
4.3 Weldability . 6
4.4 Tolerances on dimensions and shape .
...