EN 10210-1:2006

Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10210-2.
NOTE   A range of material grades is specified in this standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

Warmgefertigte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 1: Technische Lieferbedingungen

Dieser Teil dieser Europäischen Norm legt die technischen Lieferbedingungen für warmgefertigte Hohlprofile
mit kreisförmigem, quadratischem, rechteckigem oder elliptischem Querschnitt fest und gilt für warmgefertigte
Hohlprofile mit oder ohne nachfolgende Wärmebehandlung sowie für kaltgefertigte Hohlprofile, die
anschließend wärmebehandelt wurden, um eine gleichwertige metallurgische Beschaffenheit wie bei den
warmgefertigten Erzeugnissen zu erzielen.
Anforderungen an Grenzabmaße, Maße und statische Werte sind in EN 10210-2 enthalten.
ANMERKUNG In dieser Norm ist eine Reihe von Stahlsorten festgelegt, und der Anwender sollte die der vorgesehenen
Verwendung und den Betriebsbedingungen angemessene Sorte auswählen. Die Stahlsorten und mechanischen
Eigenschaften entsprechen weitgehend den Festlegungen in EN 10025-2 und EN 10025-3.

Profils creux de construction finis à chaud en aciers non alliés et à grains fins - Partie 1 : Conditions techniques de livraison

La présente partie de cette Norme européenne spécifie les conditions techniques de livraison des profils creux finis à chaud, de forme circulaire, carrée, rectangulaire ou elliptique et s'applique aux profils creux formés à chaud avec ou sans traitement thermique ou formés à froid avec traitement thermique ultérieur afin d'obtenir un état métallurgique équivalent à celui des produits formés à chaud.
Les prescriptions relatives aux tolérances, dimensions et caractéristiques de profil figurent dans l’EN 10210-2.
NOTE   Dans cette norme, est spécifiée une gamme de nuances de matériau et il convient que l'utilisateur choisisse la nuance appropriée à l'utilisation prévue et aux conditions de service. Les nuances et les caractéristiques mécaniques des profils creux finis sont compatibles avec celles figurant dans l’EN 10025-2 et l’EN 10025-3.

Vroče izdelani votli profili iz nelegiranih in drobnozrnatih konstrukcijskih jekel - 1. del: Tehnični dobavni pogoji

General Information

• Status: Published
• Publication Date: 25-Apr-2006
• Withdrawal Date: 30-Oct-2006
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 103/WG 3 - Hollow sections
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Apr-2006
• Completion Date: 26-Apr-2006
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: SIST EN 10210-1:2006 - Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

Relations

• Replaces: EN 10210-1:1994 - Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements
• Effective Date: 22-Dec-2008
• Revised: prEN 10368 - Steel structural hollow sections - General (Characteristics, evaluation of conformity and marking)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgefertigte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 1: Technische LieferbedingungenProfils creux de construction finis a chaud en aciers non alliés et a grains fins - Partie 1 : Conditions techniques de livraisonHot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10210-1:2006SIST EN 10210-1:2006en01-julij-2006SIST EN 10210-1:2006SLOVENSKI
STANDARDSIST EN 10210-1:19971DGRPHãþD



SIST EN 10210-1:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10210-1April 2006ICS 77.140.75Supersedes EN 10210-1:1994
English VersionHot finished structural hollow sections of non-alloy and fine grainsteels - Part 1: Technical delivery conditionsProfils creux pour la construction finis à chaud en aciersnon alliés et à grains fins - Partie 1 : Conditions techniquesde livraisonWarmgefertigte Hohlprofile für den Stahlbau ausunlegierten Baustählen und aus Feinkornbaustählen - Teil1: Technische LieferbedingungenThis European Standard was approved by CEN on 16 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10210-1:2006: ESIST EN 10210-1:2006



EN 10210-1:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms, definitions and symbols.5 3.1 Terms and definitions.5 3.2 Symbols.6 4 Classification and designation.6 4.1 Classification.6 4.2 Designation.6 5 Information to be obtained by the manufacturer.7 5.1 Mandatory information.7 5.2 Options.7 5.3 Example of an order.8 6 Requirements.8 6.1 General.8 6.2 Steel manufacturing process.
...