EN ISO 22391-5:2009/A1:2020
(Amendment)Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen erhöhter Temperaturbeständigkeit (PE-RT) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 22391-5:2009/Amd 1:2020, korrigierte Fassung 2021-03)
No scope available
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 22391-5:2009/Amd 1:2020, Version corrigée 2021-03)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polietilen s povišano temperaturno odpornostjo (PE-RT) - 5. del: Ustrezanje zahtevam za uporabnost sistema - Dopolnilo A1 (ISO 22391-5:2009/Amd 1:2020, popravljena verzija 2021-03)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2021
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo -
Polietilen s povišano temperaturno odpornostjo (PE-RT) - 5. del: Ustrezanje
zahtevam za uporabnost sistema - Dopolnilo A1 (ISO 22391-5:2009/Amd 1:2020,
popravljena verzija 2021-03)
Plastics piping systems for hot and cold water installations - Polyethylene of raised
temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment
1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen
erhöhter Temperaturbeständigkeit (PE-RT) - Teil 5: Gebrauchstauglichkeit des Systems -
Änderung 1 (ISO 22391-5:2009/Amd 1:2020, korrigierte Fassung 2021-03)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 5: Aptitude à
l'emploi du système - Amendement 1 (ISO 22391-5:2009/Amd 1:2020, Version corrigée
2021-03)
Ta slovenski standard je istoveten z: EN ISO 22391-5:2009/A1:2020
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 22391-5:2009/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 93.025; 23.040.01; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Polyethylene of raised temperature resistance (PE-RT) -
Part 5: Fitness for purpose of the system - Amendment 1
(ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-
03)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polyéthylène de Kaltwasserinstallation - Polyethylen erhöhter
meilleure résistance à la température (PE-RT) - Partie Temperaturbeständigkeit (PE-RT) - Teil 5:
5: Aptitude à l'emploi du système - Amendement 1 (ISO Gebrauchstauglichkeit des Systems - Änderung 1 (ISO
22391-5:2009/Amd 1:2020, Version corrigée 2021- 22391-5:2009/Amd 1:2020, korrigierte Fassung 2021-
03) 03)
This amendment A1 modifies the European Standard EN ISO 22391-5:2009; it was approved by CEN on 12 October 2020.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 17 March 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22391-5:2009/A1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 22391-5:2009/A1:2020) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 22391-5:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03 has been approved by CEN as
INTERNATIONAL ISO
STANDARD 22391-5
Second edition
2009-12-01
AMENDMENT 1
2020-12-02
Corrected version
2021-02
Plastics piping systems for hot
and cold water installations —
Polyethylene of raised temperature
resistance (PE-RT) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polyéthylène de meilleure résistance à la
température (PE-RT) —
Partie 5: Aptitude à l'emploi du système
AMENDEMENT 1
Reference number
ISO 22391-5:2009/Amd.1:2020(E)
©
ISO 2020
ISO 22391-5:2009/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 V
...
SLOVENSKI STANDARD
01-februar-2021
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo -
Polietilen s povišano temperaturno odpornostjo (PE-RT) - 5. del: Ustrezanje
zahtevam za uporabnost sistema - Dopolnilo A1 (ISO 22391-5:2009/Amd 1:2020)
Plastics piping systems for hot and cold water installations - Polyethylene of raised
temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment
1 (ISO 22391-5:2009/Amd 1:2020)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polyethylen
erhöhter Temperaturbeständigkeit (PE-RT) - Teil 5: Gebrauchstauglichkeit des Systems
- ÄNDERUNG 1 (ISO 22391-5:2009/Amd 1:2020)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 5: Aptitude à
l'emploi du système - Amendement 1 (ISO 22391-5:2009/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 22391-5:2009/A1:2020
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 22391-5:2009/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 93.025; 23.040.01; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Polyethylene of raised temperature resistance (PE-RT) -
Part 5: Fitness for purpose of the system - Amendment 1
(ISO 22391-5:2009/Amd 1:2020)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polyéthylène de Kaltwasserinstallation - Polyethylen erhöhter
meilleure résistance à la température (PE-RT) - Partie Temperaturbeständigkeit (PE-RT) - Teil 5:
5: Aptitude à l'emploi du système - Amendement 1 (ISO Gebrauchstauglichkeit des Systems - Änderung 1 (ISO
22391-5:2009/Amd 1:2020) 22391-5:2009/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 22391-5:2009; it was approved by CEN on 12 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22391-5:2009/A1:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 22391-5:2009/A1:2020) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 22391-5:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22391-5:2009/Amd 1:2020 has been approved by CEN as EN ISO 22391-
5:2009/A1:2020 without any modification.
INTERNATIONAL ISO
STANDARD 22391-5
Second edition
2009-12-01
AMENDMENT 1
2020-12
Plastics piping systems for hot
and cold water installations —
Polyethylene of raised temperature
resistance (PE-RT) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polyéthylène de meilleure résistance à la
température (PE-RT) —
Partie 5: Aptitude à l'emploi du système
AMENDEMENT 1
Reference number
ISO 22391-5:2009/Amd.1:2020(E)
©
ISO 2020
ISO 22391-5:2009/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switze
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.