iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 747-2:1993

(Main)

Furniture - Bunk beds for domestic use - Part 2: Test methods

Furniture - Bunk beds for domestic use - Part 2: Test methods

This part of EN 747 specifies test methods that assess the safety of bunk beds for domestic use. It is in particular intended to minimize the risk of accidents happending to children. Only the function sleeping is considered.

Möbel - Etagenbetten für den Wohnbereich - Teil 2: Prüfverfahren

Dieser Teil der EN 747 legt Prüfverfahren zur Beurteilung der Sicherheit von Etagenbetten im Wohnbereich fest. Es ist insbesondere beabsichtigt, die Unfallgefahren für Kinder auf ein Mindestmass zu reduzieren. Nur die Funktion des Schlafens ist berücksichtigt.

Meubles - Lits superposés à usage domestique - Partie 2: Méthodes d'essai

La présente partie de l'EN 747 spécifie des méthodes d'essais qui assurent la sécurité des lits superposés à usage domestique. Elle est en particulier destinée à réduire les risques d'accidents pouvant survenir aux enfants. Seule la fonction couchage est considérée.

Pohištvo - Pogradi za domačo uporabo - 2. del: Preskusne metode

General Information

Status
Withdrawn
Publication Date
02-Mar-1993
Withdrawal Date
17-Apr-2007
ICS
97.140 - Furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207/WG 1 - Domestic furniture
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Apr-2007
Completion Date
18-Apr-2007
Ref Project
SIST EN 747-2:1996 - Furniture - Bunk beds for domestic use - Part 2: Test methods

Relations

Replaced By
EN 747-2:2007 - Furniture - Bunk beds and high beds for domestic use - Part 2: Test methods
Effective Date
22-Dec-2008

Buy Standard

EN 747-2:1996EN 747-2:1996
PreviousNext
Standard
EN 747-2:1996
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 747-2:1996
01-april-1996
3RKLãWYR3RJUDGL]DGRPDþRXSRUDERGHO3UHVNXVQHPHWRGH
Furniture - Bunk beds for domestic use - Part 2: Test methods
Möbel - Etagenbetten für den Wohnbereich - Teil 2: Prüfverfahren
Meubles - Lits superposés a usage domestique - Partie 2: Méthodes d'essai
Ta slovenski standard je istoveten z: EN 747-2:1993
ICS:
97.140 Pohištvo Furniture
SIST EN 747-2:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 747-2:1996

---------------------- Page: 2 ----------------------

SIST EN 747-2:1996

---------------------- Page: 3 ----------------------

SIST EN 747-2:1996

---------------------- Page: 4 ---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1729-2:2023(Main)
Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods
SIST EN 1729-2:2023

This document specifies safety requirements and test methods for chairs and tables for general educational purposes in educational institutions including kindergarten, childcare institutions and early years education settings.
It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops.
The chairs fulfilling the applicable requirements of this document are suitable for users weighing up to 110kg.
The figures illustrate test principles only and cannot be used to carry out the tests.
NOTE   EN 1729-1 specifies functional dimensions and marking of chairs and tables for general educational institutions.
Annex A (informative) gives a test method for determination of the displacement of chairs placed on tabletops.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16611:2023(Main)
Furniture - Assessment of the surface resistance to microscratching
SIST EN 16611:2023

This document specifies a method for the assessment of the surface resistance to microscratching and relates to rigid surfaces of all finished products, considering the following exceptions:
- Method A is suitable for all types of surface coatings and coverings except for lacquers with pearly or metallic effects.
- Method B is suitable for all types of surface.
- No method applies to finishes on leather and fabrics.
This document is applicable to the test intended to be carried out on a part of finished furniture, but it can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13721:2023(Main)
Furniture - Assessment of the surface reflectance
SIST EN 13721:2023

This document specifies a method for the assessment of the surface reflectance of furniture surfaces and relates to rigid surfaces of all finished products regardless of materials, except for finishes on leather and fabrics, which are excluded from this document.
This document is applicable to the test, intended to be carried out on finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test method is not applicable to some metallic paints and pearly coatings.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17869:2023(Main)
Hardware for furniture - Test methods for strength and overload tests of connectors for furniture constructed from panel material
SIST EN 17869:2023

This document specifies test methods for the strength and overload tests of connectors for furniture constructed from panel material and procedures for evaluating test results.
This document is specifically intended for assessing cabinet connectors for carcases made of wood-based panel materials. The methods described can, however, be used to assess the relative performance of other types of connectors, e.g. some types of connectors for beds.
The strength and overload tests only apply to the connectors and their components, as well as the mounting to and in the cabinet carcase. They do not apply to additional functions that the connector can have, e.g. covering of the connector.
The tests described in this document are carried out according to a test setup with specified properties and characteristics.
The test results are only valid for the connector tested. The results can be used to represent the performance of production models, provided the tested model is representative of the production model.
Aging and the influences of temperature and humidity are not included. This document contains four informative annexes, providing additional methodologies for the detailed evaluation of the test results and a procedure for comparing the tested connector with a reference connector:
-   Annex A (informative) Reference connector - Glued dowel;
-   Annex B (informative) Ratio generation;
-   Annex C (informative) Stiffness calculation for further evaluation of the overload;
-   Annex D (informative) Evaluation by the characteristic value (5 % percentile).

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1335-1:2020+A1:2022(Main + Amendment)
Office furniture - Office work chair - Part 1: Dimensions - Determination of dimensions
SIST EN 1335-1:2020+A1:2023

This document specifies the dimensions of four types of office work chairs as well as test methods for their determination.
It does not apply to seating for children for which a European Standard exists.
Annex A (informative) contains a rationale for office chair dimensions.
Annex B (informative) contains an example to clarify the use of Table 2.
Annex C (informative) contains proposals for dimensions for headrests.
Annex D (informative) contains the measurement uncertainty.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17737:2022(Main)
Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings
SIST EN 17737:2023

This document specifies test methods for the determination of corrosion resistance of furniture fittings as ready-to-use assemblies or their individual parts.
It applies to the optical assessment of surface changes for the following materials:
-   metals and their alloys;
-   metal coatings with anodic or cathodic properties;
-   conversion coatings;
-   anodic oxide layers;
-   organic coatings on metallic materials.
This document does not include any requirements regarding the corrosion resistance of furniture fittings. These can be given in the product specifications.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14749:2016+A1:2022(Main + Amendment)
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
SIST EN 14749:2016+A1:2022

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16209:2022(Main)
Furniture - Classification for properties for furniture surfaces
SIST-TS CEN/TS 16209:2022

This document specifies a system for the classification of the resistance to:
—   Dry heat;
—   Wet heat;
—   Cold liquids;
—   Abrasion;
—   Scratching;
—   Microscratching.
The classification applies to foils, laminates, melamine faced boards, pigmented and transparent lacquers. The classification for the resistance to cold liquids also applies to oils and waxes.
The following classification does not apply to leather surfaces.

  • Technical specification
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17191:2021(Main)
Children’s Furniture - Seating for children - Safety requirements and test methods
SIST EN 17191:2021

This document specifies safety requirements and test methods for seating specifically intended for children who are able to walk and sit by themselves.
It applies to seating intended to be placed on the floor for domestic and non-domestic use including in day care centres and for indoor and outdoor use.
NOTE 1   Seating includes but is not limited to chairs, benches, stools, bean bags, deckchairs, rocking chairs, reclining chairs, armchairs, foldable chairs and swivel chairs.
It applies to the seating function only. If the seating has additional functions or can be converted into other products, the relevant European Standards could, in addition, apply. (See B.2).
It does not apply to children's highchairs, childcare articles such as reclined cradles and seating in educational institutions for which other European Standards exist.
NOTE 2   Seating in educational institutions are covered by the European Standards EN 1729-1 and EN 1729-2.
It does not apply to swing chairs, wheelchairs, electrical safety or seating for children with special needs.
The document contains 4 annexes as follows:
-   Annex A (informative) - Dimensional guidance for designing seating for children;
-   Annex B (informative) - Rationale for the inclusion of the safety requirements;
-   Annex C (informative) - Guidance for applicable tests according to seating size;
-   Annex ZA (informative) - Relationship between this European Standard and the safety requirements of Directive 2001/95/EC aimed to be covered.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16890:2017+A1:2021(Main + Amendment)
Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods
SIST EN 16890:2017+A1:2021

This European Standard specifies safety requirements and test methods for mattresses including mattress bases and mattress toppers, used in children's cots, travel cots, cribs and suspended baby beds, for domestic and non-domestic use.
This European Standard does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day