CEN/TC 207/WG 1 - Domestic furniture

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults. It also specifies additional test methods for seat side-to-side durability as well as finger entrapment and shear and compression.
It does not apply to ranked seating, seating for non-domestic use, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics.
The requirements are based on use by persons weighing up to 110 kg.
Annex A (normative) specifies the seat side-to-side durability test in D-G points.
Annex B (informative) gives rationales for some of the tests referred to in Table 1.
Annex C (normative) specifies the test methods for finger entrapment and shear and compression.
Annex D (normative) specifies the seat loading point for seating with suspended flexible material.

This document specifies requirements on safety, strength and durability for all types of fully assembled beds used by adults in domestic and non-domestic environments including their components, such as bed frames, bed bases, mattresses and mattress pads (when they form a unit with the mattress) and, when supplied with the bed base, mattresses and mattress pads.
The tests are based on use by persons weighing up to 110 kg.
With the exception of sleeping functions, it does not apply to foldaway beds.
It does not apply to bunk beds, high beds and medical beds where separate Standards exist, as well as waterbeds and air beds.
Additional requirements can be applicable to items that have additional functions, e.g. storage features, day beds and convertible sofa-beds.
The durability test, 6.6.1, test 11, applies only to electrically operated beds.
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Annex A (normative) specifies test methods for finger entrapment.
Annex B (informative) gives a rationale.

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic tables intended for use by adults, including those with glass in their construction. It also contains additional test methods in Annex A and Annex B.
It does not apply to office tables and office desks, tables for non-domestic use, tables for educational institutions or outdoor tables for which European Standards exist.
It does not apply to trestle tables.
With the exception of stability tests, this document does not provide assessment of the suitability of any storage features included in domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation.
Annex A (normative) contains test methods for finger entrapment.
Annex B (informative) contains a table top deflection test.
Annex C (informative) contains a rationale.

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

This European Standard specifies co-ordinating sizes for kitchen units, worktops, recess panelling, furniture fronts and decorative panels as well as for kitchen appliances (white goods and ovens) and further installation elements, e. g. sinks (abbreviated as "appliances").
It specifies dimensions for the height, the width, the depth and the space to integrate appliances in kitchen units.
This European Standard does not apply to kitchens used commercially (e. g. in hotels, restaurants).

This European standard specifies test methods for the determination of the durability and hardness of mattresses and all types of fully erected beds with mattresses (and mattress pads when they form a unit with the mattress). It does not apply to water beds, air beds and children cots.
It includes a method for the determination of the firmness rating of a mattress or a bed correlating to the subjective assessment made by people (see Annex A). It must be emphasized that the firmness rating cannot be used to demonstrate comfort and/or quality of a mattress or a complete bed.
Ageing and degradation caused by air, light, humidity and temperature is not included. The test results are only valid for the article tested. When test results are intended to be applied to other similar articles, the test specimen shall be representative of them.

This part of the prEN 1129-1 specifies requirements relating to the safety and the strength of foldaway beds for domestic use. The standard also deals with strength of wall fastenings where applicable. This standard does not specify the properties of the materials or electrical equipment used in the construction of foldaway beds. Folding beds, camping beds, convertible beds/chairs or settees are not covered by this standard.

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults.
It does not apply to ranked seating, seating for non-domestic use, office work chairs, office visitors chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics.
The tests are based on use by persons weighing up to 110 kg.

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of domestic tables for use by adults, including those with glass in their construction.
It does not apply to office tables or desks, tables for non-domestic use, tables for educational institutions and outdoor tables for which European Standards exist.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 3, Table 2, the top becomes detached from the understructure.
With the exception of stability tests, the standard does not provide assessment of the suitability of any storage features included in domestic tables.
It does not include requirements for the durability of castors and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation.
Annex A (informative) contains a table top deflection test.

This draft European Standard specifies mechanical safety requirements and testing for all types of fully erected domestic adult beds including all component elements such as bed frame, bed base, mattress and mattress pads (when they form a unit with the mattress). It does not applay to foldaway beds, bunk beds, children cots and adjustable beds for disabled persons where separate standards exist, as well as waterbeds and air beds. Further tests may be applicable for test units that are multi purposes, e.g. convertible sofa beds and power driven system.

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

This European Standard contains co-ordinating sizes for kitchen furniture including worktops as well as for kitchen appliances, sinks and decorative panels. For convenience, in this standard the terms "furniture" and "appliance" are used for "kitchen furniture" and "kitchen appliance".
It defines dimensions for the height, the width, the depth and the space to enable furniture, appliances, sinks and decorative panels to fit together as elements of kitchen equipment.
This European Standard does not apply to catering equipment.

This European Standard specifies safety requirements and test methods for the structure of all types of kitchen and bathroom storage units and domestic storage furniture that are fully assembled and ready for use, including kitchen and bathroom worktops and movable and non-movable parts and parts made of glass.
This European Standard applies to the storage function only. If the furniture has additional functions, it is essential that it also meets the requirements of the appropriate European safety standard for that function.
It does not apply to units covered by EN 71-1:1998/A7:2002 nor to catering equipment.
Safety depending on the structure of the building is not included, e.g. the strength of wall hanging cabinets includes only the cabinet and its parts. The wall and the wall attachments are not included.
The stability tests for storage furniture (6.6) include an allowance for sloping or uneven floors and the effect of soft carpets.

This European standard specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults.
It does not apply to ranked seating, seating for non-domestic use, office work chairs, office visitors chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
The tests are based on use by persons weighing up to 110 kg.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics.

This European standard specifies the minimum requirements for the safety, strength and durability of all types of domestic tables for use by adults, including those with glass in their construction.
It does not apply to office tables or desks, tables for non-domestic use, tables for educational institutions and outdoor tables for which EN standards exist.
It does not apply to tables where the tabletop is not fixed to the understructure, i.e. when applying test 3, Table 2, the top becomes detached from the understructure.
With the exception of stability tests, the standard does not provide assessment of the suitability of any storage features included in domestic tables.
It does not include requirements for the durability of castors and height adjustment mechanisms.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation.
Annex A contains test methods for the deflection of tabletops.

This European pre-standard specifies mechanical and structural safety requirements for all types of domestic seating for adults including folding and adjustable seating. This European pre-standard applies to seating that can be converted into beds, but only when in the seating configuration. It does not include durability requirements for castors, for reclining and tilting mechanisms nor for seat height adjustment mechanisms, such as gas cylinders. It does not apply to outdoor seating. Requirements for ageing and degradation are not included.

This European pre-standard specifies mechanical and structural safety requirements for domestic tables, but not including height adjustment mechanisms and castors. This European pre-standard does not apply to tables intended specifically for use by children or to occasional tables. It does not apply to outdoor tables or changing tables. It does not include durability requirements for castors nor for height adjustment mechanisms. Requirements for ageing and degradation are not included.

This European Prestandard specifies a test method for the determination of durability of upholstery complete and on the seating.
Test methods are specified for seat durability and for the determination of hardness and height loss.
It does not apply to the strength and durability of the structure of the seating, which is covered by EN 1728.
The effect of temperature and moisture are not included.
Annex A (informative) includes a test method for testing the interaction between the cover and the underlying upholstery as well as the interaction between the seat and back upholstery.

This part of EN 716 specifies requirements relating to the safety of children's cots for domestic use. It applies to cots and folding cots, with an internal length between 900 and 1400 mm. It does not cover rocking and swinging cots. Cots that can be converted into other items e.g. changing units, playpens shall,when converted, fulfill the relevant standard for that item. Annex A (informative) summaries the dimensions referred to in this standard.

This part of EN 716 describes test methods that assess the safety of children's cots and folding cots for domestic use. It applies to cots and folding cots withan internal length between 900 mm and 1400 mm that are designed to prevent the child from climbing out. It does not cover rocking and swinging cots. The tests are designed to be applied to a cot that is fully assembled and ready for use. Note: The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model.

This part of EN 747 specifies test methods that assess the safety of bunk beds for domestic use. It is in particular intended to minimize the risk of accidents happending to children. Only the function sleeping is considered.

This part of EN 747 specifies requirements relating to the safety of bunk beds for domestic use. It is in particular intended to minimize the risk of accidents happening to children. Only the function sleeping is considered. This standard also applies to single beds for use at a height of the upper face of the bed base of 800 mm or more above floor level, irrespective of the use to which the space below is put.

This European standard specifies safety requirements and test methods for all types of domestic storage furniture including those with glass in their construction. Safety depending on the structure of the building is not included e.g. the strength of wall hanging cabinets includes only the cabinet and its parts. The wall and the fixing in the wall is not included. It is intended to prevent serious injury through normal functional use, as well as misuse that might reasonably be expected to occur.

This European Standard specifies methods for the determination of the stability of all types of domestic seating which can be used by adults. For seating that can be converted into beds, it applies only to the seating configuration. Chair stability can be determined by either the experimental or the calculative method. These methods are compatible in that they apply the same forces at the same positions. If the result of the calculative method is uncertain or marginal the result should be checked, if possible, by the experimental method.