EN ISO 9856:2016

Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016)

ISO 9856:2016 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus.
It is not applicable or valid for light conveyor belts as described in ISO 21183‑1.

Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung des Elastizitätsmoduls (ISO 9856:2016)

Courroies transporteuses - Détermination de l'allongement élastique et rémanent et calcul du module d'élasticité (ISO 9856:2016)

ISO 9856:2016 spécifie une méthode pour la détermination de l'allongement élastique et rémanent d'une courroie transporteuse et le calcul du module d'élasticité.
Elle n'est ni applicable ni appropriée pour les courroies transporteuses légères telles que décrites dans l'ISO 21183‑1.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Določitev elastičnega in trajnega raztezka ter izračun modula elastičnosti (ISO 9856:2016)

Ta mednarodni standard določa metodo za določanje elastičnega in trajnega raztezka traka tračnega transporterja ter izračun modula elastičnosti.
Ne uporablja se oziroma ni veljaven za lahke trakove tračnih transporterjev, kot so opisani v standardu ISO 21183-1.

General Information

• Status: Published
• Publication Date: 25-Oct-2016
• Withdrawal Date: 29-Apr-2017
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188 - Conveyor belts
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Oct-2016
• Completion Date: 26-Oct-2016
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 9856:2017 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016)

Relations

• Replaces: EN ISO 9856:2003 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
• Effective Date: 02-Nov-2016
• Replaces: EN ISO 9856:2003/A1:2012 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
• Effective Date: 02-Nov-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9856:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 9856:2004
SIST EN ISO 9856:2004/A1:2012
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY'RORþLWHY
HODVWLþQHJDLQWUDMQHJDUD]WH]NDWHUL]UDþXQPRGXODHODVWLþQRVWL,62
Conveyor belts - Determination of elastic and permanent elongation and calculation of
elastic modulus (ISO 9856:2016)
Fördergurte - Bestimmung der elastischen und dauerhaften Dehnung und Berechnung
des Elastizitätsmoduls (ISO 9856:2016)
Courroies transporteuses - Détermination de l'allongement élastique et permanent et
calcul du module d'élasticité (ISO 9856:2016)
Ta slovenski standard je istoveten z: EN ISO 9856:2016
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 9856:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9856:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 9856:2017


EN ISO 9856
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2016
EUROPÄISCHE NORM
ICS 53.040.20 Supersedes EN ISO 9856:2003
English Version

Conveyor belts - Determination of elastic and permanent
elongation and calculation of elastic modulus (ISO
9856:2016)
Courroies transporteuses - Détermination de Fördergurte - Bestimmung der elastischen und
l'allongement élastique et rémanent et calcul du dauerhaften Dehnung und Berechnung des
module d'élasticité (ISO 9856:2016) Elastizitätsmoduls (ISO 9856:2016)
This European Standard was approved by CEN on 5 October 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9856:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9856:2017
EN ISO 9856:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9856:2017
EN ISO 9856:2016 (E)
European foreword
This document (EN ISO 9856:2016) has been prepared by Technical Committee ISO/TC 41 “Pulleys and
belts (including veebelts)” in collaboration with Technical CEN/TC 188 “Conveyor belts” the secretariat
of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be
withdrawn at the latest by April 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 9856:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9856:2016 has been approved by CEN as EN ISO 9856:2016 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 9856:2017

---------------------- Page: 6 ---------------
...