iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10253-1:1999

(Main)

Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements

Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements

This European Standard specifies requirements for steel butt-welding fittings (elbows and return bends, concentric and eccentric reducers, equal and reducing tees, dished ends and caps) made of wrought carbon steel and delivered without specific inspection. The fittings described in this European Standard do not fulfil specific design requirements; consequently they cannot be considered as conforming to the Essential Requirements of the Pressure Equipment Directive (Directive 97/23/EC of 29.05.1997).

Formstücke zum Einschweißen - Teil 1: Unlegierter Stahl für allgemeine Anwendungen und ohne besondere Prüfanforderungen

Diese Europäische Norm legt Anforderungen für Formstücke zum Einschweißen aus unlegiertem Stahl ohne besondere Prüfanforderungen (Rohrbogen, konzentrische und exzentrische Reduzierstücke, T-Stücke mit gleichem Abzweig und mit reduziertem Abzweig, gewölbte Böden, Klöpperform und Korbbogenform) fest. Formstücke nach dieser Europäischen Norm erfüllen keine spezifischen Anforderungen an die Auslegung; man darf daher nicht davon ausgehen, daß sie die wesentlichen Sicherheitsanforderungen der Druckgeräterichtlinie (Richtlinie 97/23/EG vom 29.05.1997) erfüllt.

Raccords à souder bout à bout - Partie 1: Acier au carbone pour usages généraux et sans contrôle spécifique

La présente norme européenne spécifie les prescriptions concernant les raccords à souder bout à bout (à savoir: coudes, réductions concentriques et excentriques, tés égaux et réduits, fonds bombés et caps) en acier au carbone, livrés sans contrôle spécifique. Les raccords décrits dans la présente norme européenne ne respectent pas d'exigences de conception spécifiques; en conséquence, ils ne peuvent pas être considérés comme satisfaisant aux Exigences Essentielles de la Directive Equipements sous Pression (Directive 97/23/EC du 29.05.1997).

Cevni fitingi za soležne zvare - 1. del: Ogljikovo jeklo za splošno uporabo in brez posebnih zahtev kontrole

General Information

Status
Published
Publication Date
21-Sep-1999
Withdrawal Date
30-Mar-2000
ICS
23.040.40 - Metal fittings
Technical Committee
ECISS/TC 110 - Steel tubes, and iron and steel fittings
Drafting Committee
ECISS/TC 29/SC 3/WG 1 - Steel butt welding fittings
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
30-Dec-2022
Ref Project
SIST EN 10253-1:2000 - Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements

Buy Standard

EN 10253-1:2000EN 10253-1:2000
PreviousNext
Standard
EN 10253-1:2000
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi za soležne zvare - 1. del: Ogljikovo jeklo za splošno uporabo in brez posebnih zahtev kontroleFormstücke zum Einschweißen - Teil 1: Unlegierter Stahl für allgemeine Anwendungen und ohne besondere PrüfanforderungenRaccords a souder bout a bout - Partie 1: Acier au carbone pour usages généraux et sans contrôle spécifiqueButt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements77.140.45Nelegirana jeklaNon-alloyed steels23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 10253-1:1999SIST EN 10253-1:2000en01-november-2000SIST EN 10253-1:2000SLOVENSKI
STANDARD
SIST EN 10253-1:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10374:2021(Main)
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
SIST EN 10374:2021

This document specifies dimensions, tolerances, internal and external surface characteristics and marking of welded fittings for the food and chemical industry.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10253-2:2021(Main)
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
SIST EN 10253-2:2021

This document specifies the technical delivery requirements for seamless and welded butt welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloy steel in two test categories which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases.
It specifies:
a)   type of fittings;
type A: Butt-welding fittings with reduced pressure factor;
type B: Butt-welding fittings for use at full service pressure;
b)   steel grades and their chemical compositions;
c)   mechanical properties;
d)   dimensions and tolerances;
e)   requirements for inspection and testing;
f)   inspection documents;
g)   marking;
h)   protection and packaging.
NOTE   The selection of the appropriate fitting (material, thickness) is the ultimate responsibility of the manufacturer of the pressure equipment (see European Legislation for Pressure Equipment). In the case of a harmonized supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently, it is essential that the technical data stated in the material standard be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the PED are satisfied.

  • Standard
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10253-4:2008/AC:2009(Corrigendum)
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
SIST EN 10253-4:2008/AC:2009

TC - Small editorial improvements and correction in 12.2.2 and replacement of Figure B.3 in B.4.5

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10253-3:2008(Main)
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
SIST EN 10253-3:2009

1.1   This part of EN 10253 specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic–ferritic (duplex) stainless steel without specific inspection requirements.
It specifies:
   steel grades;
   mechanical properties;
   dimensions and tolerances;
   requirements for inspection and testing;
   inspection documents;
   marking;
   handling and packaging.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10253-4:2008(Main)
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
SIST EN 10253-4:2008

1.1   This European Standard specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperature or at elevated temperatures.
It specifies:
   the type of fittings;
   type A (see 7.2)
   type B (see 7.3)
   the steel grades;
   the mechanical properties;
   the dimensions and tolerances;
   the requirements for inspection and testing;
   the inspection documents;
   the marking;
   the handling and packaging.
NOTE   In the case of a harmonised supporting standard for materials, presumption of conformity to the Essential Requirement(s) (ESRs) is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive (PED) are satisfied.
1.2   Unless otherwise specified in this European Standard the general technical delivery requirements in EN 10021 apply.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10298:2005(Main)
Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar
SIST EN 10298:2005

This European Standard specifies requirements for cement mortar linings for protecting the internal surface of steel tubes and pipeline components. It also specifies requirements for their application. It is applicable to the linings of tubes that have been welded longitudinally or spirally, seamless tubes and non-alloy steel components used for fluid transportation. This European Standard does not cover in situ applied or rehabilitation linings.
This type of lining is used in particular in the transport and distribution, under pressure or by gravity, of water intended for human consumption and industrial use, and also in fire extinguishing and waste water systems. The temperature of the water transported should not exceed 50 °C. Higher working temperature can be used by agreement of the parties.
The constituent materials of cement mortar lining, when used under the conditions for which they are designed, in permanent or temporary contact with water intended for human consumption, shall not change the quality of that water to such an extent that it fails to comply with the requirements of European regulations. For this purpose, reference shall be made to the relevant national standards transposing EN standards when available, dealing with the influence of materials on water quality.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10224:2002/A1:2005(Amendment)
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions
SIST EN 10224:2003/A1:2005

1.1 This European standard specifies requirements for the products listed below for the conveyance of aqueous liquids, including water for human consumption: - seamless and welded non-alloy steel tubes; - end preparation of tube ends for butt welding; - fittings fabricated from the tube; - fittings fabricated from plate or strip. 1.2 This European standard covers a range of tube outside diameters from 26,9 mm to 2 743 mm.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10242:1994/A2:2003(Amendment)
Threaded pipe fittings in malleable cast iron
SIST EN 10242:1997/A2:2003

Deletion of the Clause 12 "Quality assurance system" and creation of an informative annex with the text of Clause 12.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10224:2002(Main)
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
SIST EN 10224:2003

1.1 This European standard specifies requirements for the products listed below for the conveyance of aqueous liquids, including water for human consumption: - seamless and welded non-alloy steel tubes; - end preparation of tube ends for butt welding; - fittings fabricated from the tube; - fittings fabricated from plate or strip. 1.2 This European standard covers a range of tube outside diameters from 26,9 mm to 2 743 mm.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10288:2002(Main)
Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
SIST EN 10288:2003

This European Standard defines the application of factory applied external two layer extruded polyethylene based coatings for the corrosion protection of tubes and pipeline components.
External extruded polyethylene coating can be used for the protection of buried or submerged tubes service at temperatures up to + 60 °C for type 1 and + 30 °C for type 2.
The coatings in this standard can be applied to longitudinally or spirally welded and to seamless steel tubes and components used for the construction of pipelines for conveying liquids or gases.
Tubes coated with this type of coating may be further protected by means of cathodic protection.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day