CEN/TS 15412:2010

Solid recovered fuels - Methods for the determination of metallic aluminium

This Technical Specification specifies two different methods for the determination of metallic aluminium in solid recovered fuels:
-   method a: dissolution of metallic aluminium and analysis by Inductively Coupled Plasma Optic Emission Spectrometry (ICP-OES) or by Flame Atomic Absorption Spectrometry (FAAS);
-   method b: Differential Thermal Analysis (DTA) on the solid SRF.

Feste Sekundärbrennstoffe - Verfahren zur Bestimmung des Gehaltes an metallischem Aluminium

Diese Technische Spezifikation legt zwei unterschiedliche Verfahren zur Bestimmung von metallischem Aluminium in festen Sekundärbrennstoffen fest:
-   Verfahren A: Auflösung von metallischem Aluminium und Bestimmung durch optische Emissions-spektrometrie mit induktiv gekoppeltem Plasma (ICP OES) oder durch Flammen-Atomabsorp¬tions-spektrometrie (FAAS);
-   Verfahren B: Differenzialthermoanalyse (DTA) von SRF.

Combustibles solides de récupération - Méthode de détermination de l'aluminium total

Trdna alternativna goriva - Metode za določevanje aluminija v kovinski obliki

Ta evropski standard določa dve različni metodi za določanje aluminija v kovinski obliki v trdnih alternativnih gorivih: metoda a: Raztopitev aluminija v kovinski obliki in analiza z spektrometrijo optičnih emisij z uporabo induktivno skopljene plazme (ICP-OES) ali z plamensko atomsko absorpcijsko spektrometrijo (FAAS); metoda b: diferencialna toplotna analiza (DTA) na trdnem SRF.

General Information

• Status: Published
• Publication Date: 01-Jun-2010
• ICS: 75.160.10 - Solid fuels
• ICS: 75.160.40 - Biofuels
• Technical Committee: CEN/TC 343 - Solid Recovered Fuels
• Drafting Committee: CEN/TC 343/WG 5 - Chemical Tests
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 12-Jun-2013
• Completion Date: 12-Jun-2013
• Mandate: M/325 - Mandate to CEN on Solid Recovered Fuels (SRF)
• Ref Project: SIST-TS CEN/TS 15412:2010 - Solid recovered fuels - Methods for the determination of metallic aluminium

Relations

• Replaces: CEN/TS 15412:2006 - Solid recovered fuels - Methods for the determination of metallic aluminium
• Effective Date: 08-Jun-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15412:2010
01-september-2010
1DGRPHãþD
SIST-TS CEN/TS 15412:2007
7UGQDDOWHUQDWLYQDJRULYD0HWRGH]DGRORþHYDQMHDOXPLQLMDYNRYLQVNLREOLNL
Solid recovered fuels - Methods for the determination of metallic aluminium
Feste Sekundärbrennstoffe - Verfahren zur Bestimmung des Gehaltes an metallischem
Aluminium
Combustibles solides de récupération - Méthodes pour la détermination de l'aluminium
métal
Ta slovenski standard je istoveten z: CEN/TS 15412:2010
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15412:2010 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15412:2010

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15412:2010


TECHNICAL SPECIFICATION
CEN/TS 15412

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
June 2010
ICS 75.160.10 Supersedes CEN/TS 15412:2006
English Version
Solid recovered fuels - Methods for the determination of metallic
aluminium
Combustibles solides de récupération - Méthode de Feste Sekundärbrennstoffe - Verfahren zur Bestimmung
détermination de l'aluminium total des Gehaltes an metallischem Aluminium
This Technical Specification (CEN/TS) was approved by CEN on 27 March 2010 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15412:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15412:2010
CEN/TS 15412:2010 (E)
Contents Page
Foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Safety remarks . 5
5 Principle . 5
5.1 Method A. 5
5.2 Method B. 5
6 Apparatus . 5
6.1 Method A. 5
6.2 Method B . 6
7 Reagents . 6
7.1 General .
...