EN ISO 6744-4:2004
(Main)Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999)
Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999)
This part of ISO 6744 specifies a method for determining the fatty acid content of alkyd resins. It is always used in
conjunction with ISO 6744-2 and -3, which contain the preceding analysis steps.
It is not applicable to modified alkyd resins (see 3.2 of ISO 6744-1:1999) or to resins containing benzoic acid
Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 4: Bestimmung des Gehaltes an Fettsäure (ISO 6744-4:1999)
Liants pour peintures et vernis - Résines alkydes - Partie 4: Détermination de la teneur en acides gras (ISO 6744-4:1999)
La présente partie de l'ISO 6744 spécifie une méthode permettant de déterminer la teneur en acides gras des
résines alkydes. Elle est toujours utilisée en association avec l'ISO 6744-2 et l'ISO 6744-3, qui décrivent les
premières étapes de l'analyse.
Elle n'est pas applicable aux résines alkydes modifiées (voir 3.2 de l'ISO 6744-1:1999), ni aux résines contenant de
l'acide benzoïque.
Veziva za barve in lake - Alkidne smole - 4. del: Določevanje maščobnih kislin (ISO 6744-4:1999)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999)Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 4: Bestimmung des Gehaltes an Fettsäure (ISO 6744-4:1999)Liants pour peintures et vernis - Résines alkydes - Partie 4: Détermination de la teneur en acides gras (ISO 6744-4:1999)Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999)87.060.20VezivaBindersICS:Ta slovenski standard je istoveten z:EN ISO 6744-4:2004SIST EN ISO 6744-4:2004en01-julij-2004SIST EN ISO 6744-4:2004SLOVENSKI
STANDARD
SIST EN ISO 6744-4:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 6744-4May 2004ICS 87.060.20English versionBinders for paints and varnishes - Alkyd resins - Part 4:Determination of fatty acid content (ISO 6744-4:1999)Liants pour peintures et vernis - Résines alkydes - Partie 4:Détermination de la teneur en acides gras (ISO 6744-4:1999)Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 4:Bestimmung des Gehaltes an Fettsäure (ISO 6744-4:1999)This European Standard was approved by CEN on 8 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 6744-4:2004 ESIST EN ISO 6744-4:2004
EN ISO 6744-4:2004 (E)2ForewordThe text of ISO 6744-4:1999 has been prepared by Technical Committee ISO/TC 35 "Paints andvarnishes” of the International Organization for Standardization (ISO) and has been taken overas EN ISO 6744-4:2004 by Technical Committee CEN/TC 139 "Paints and varnishes", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by November 2004, and conflicting nationalstandards shall be withdrawn at the latest by November 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium,Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Endorsement noticeThe text of ISO 6744-4:1999 has been approved by CEN as EN ISO 6744-4:2004 without anymodifications.NOTE
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 6744-4:2004
EN ISO 6744-4:2004 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions ofany of these publications apply to this European Standard only when incorporated in it byamendment or revision. For undated references the latest edition of the publication referred toapplies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicatedby (mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 36961987Water for analytical laboratory use -Specification and test methodsEN ISO 36961995ISO 155282000Paints, varnishes and raw materialsfor paints and varnishes - SamplingEN ISO 155282000SIST EN ISO 6744-4:2004
SIST EN ISO 6744-4:2004
ReferencenumberISO6744-4:1999(E)©ISO1999INTERNATIONALSTANDARDISO6744-4Firstedition1999-12-01Bindersforpaintsandvarnishes—Alkydresins—Part4:DeterminationoffattyacidcontentLiantspourpeinturesetvern
...
SLOVENSKI STANDARD
SIST EN ISO 6744-4:2004
01-julij-2004
Veziva za barve in lake - Alkidne smole - 4. del: Določevanje maščobnih kislin (ISO
6744-4:1999)
Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid
content (ISO 6744-4:1999)
Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 4: Bestimmung des Gehaltes an
Fettsäure (ISO 6744-4:1999)
Liants pour peintures et vernis - Résines alkydes - Partie 4: Détermination de la teneur
en acides gras (ISO 6744-4:1999)
Ta slovenski standard je istoveten z: EN ISO 6744-4:2004
ICS:
87.060.20 Veziva Binders
SIST EN ISO 6744-4:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6744-4:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 6744-4:2004
EUROPEAN STANDARD
EN ISO 6744-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2004
ICS 87.060.20
English version
Binders for paints and varnishes - Alkyd resins - Part 4:
Determination of fatty acid content (ISO 6744-4:1999)
Liants pour peintures et vernis - Résines alkydes - Partie 4: Bindemittel für Beschichtungsstoffe - Alkydharze - Teil 4:
Détermination de la teneur en acides gras (ISO 6744- Bestimmung des Gehaltes an Fettsäure (ISO 6744-4:1999)
4:1999)
This European Standard was approved by CEN on 8 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6744-4:2004 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6744-4:2004
EN ISO 6744-4:2004 (E)
Foreword
The text of ISO 6744-4:1999 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 6744-4:2004 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2004, and conflicting national
standards shall be withdrawn at the latest by November 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 6744-4:1999 has been approved by CEN as EN ISO 6744-4:2004 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6744-4:2004
EN ISO 6744-4:2004 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3696 1987 Water for analytical laboratory use - EN ISO 3696 1995
Specification and test methods
ISO 15528 2000 Paint
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.