iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 276:2021

(Main)

Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)

Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)

This document specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.

Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren (ISO 276:2019)

Dieses Dokument legt die Anforderungen und die entsprechenden Prüfverfahren für fünf Typen von Leinöl-Standöl fest, die für Beschichtungsstoffe geeignet sind.

Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai (ISO 276:2019)

Le présent document spécifie les exigences et les méthodes d'essai correspondantes de cinq types de standolie d'huile de lin pour peintures et vernis.

Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode (ISO 276:2019)

General Information

Status
Published
Publication Date
18-May-2021
Withdrawal Date
29-Nov-2021
ICS
87.060.20 - Binders
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139 - Paints and varnishes
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-May-2021
Completion Date
19-May-2021
Ref Project
SIST EN ISO 276:2021 - Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)

Relations

Replaces
EN ISO 276:2010 - Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002)
Effective Date
15-Jul-2018

Buy Standard

EN ISO 276:2021EN ISO 276:2021
PreviousNext
Standard
EN ISO 276:2021
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN ISO 276:2012
Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode
(ISO 276:2019)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
(ISO 276:2019)
Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren
(ISO 276:2019)
Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes
d'essai (ISO 276:2019)
Ta slovenski standard je istoveten z: EN ISO 276:2021
ICS:
87.060.20 Veziva Binders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 276
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 87.060.20 Supersedes EN ISO 276:2010
English Version
Binders for paints and varnishes - Linseed stand oil -
Requirements and methods of test (ISO 276:2019)
Liants pour peintures et vernis - Standolies d'huile de Bindemittel für Beschichtungsstoffe - Leinöl-Standöl -
lin - Exigences et méthodes d'essai (ISO 276:2019) Anforderungen und Prüfverfahren (ISO 276:2019)
This European Standard was approved by CEN on 9 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 276:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 276:2021) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards
shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 276:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 276:2019 has been approved by CEN as EN ISO 276:2021 without any modification.

INTERNATIONAL ISO
STANDARD 276
Third edition
2019-09
Binders for paints and varnishes —
Linseed stand oil — Requirements and
methods of test
Liants pour peintures et vernis — Standolies d'huile de lin —
Exigences et méthodes d'essai
Reference number
ISO 276:2019(E)
©
ISO 2019
ISO 276:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 276:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and test methods .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7142:2023(Main)
Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)
SIST EN ISO 7142:2023

This document specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for use as binders for paints and varnishes.
The test methods described in this document are not intended for epoxy esters.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-3:2021(Main)
Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
SIST EN ISO 13885-3:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in water by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
This method is applicable to neutral polymers and polyanions (e.g. polycarboxylates, polysaccharides, fully hydrolyzed polyvinyl alcohols and high-molecular polyethylene oxides). It is not applicable to polycations [e.g. polyvinylpyrrolidone, polyvinylpyridine, salts of poly(diallyl‑N,N‑dimethyl‑azacyclopentane), chitosan].
Despite good solubility in the mobile phase and even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system (see also Clause 12).
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction methods (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-2:2021(Main)
Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)
SIST EN ISO 13885-2:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in DMAC (N,N-Dimethylacetamide) by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-1:2021(Main)
Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)
SIST EN ISO 13885-1:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in tetrahydrofuran (THF) by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or of polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening. If absolute molar-mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4629-3:2020(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)
SIST EN ISO 4629-3:2020

This document specifies a titrimetric method for determining the hydroxyl groups in resins and binders for paints and varnishes.
This method is primarily suitable for neutral media. Acidic products provide higher values; neutral products provide, through neutralization of the acidic carbamates, lower values. For these products, preliminary tests are performed to ensure the applicability of the method.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4625-1:2020(Main)
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)
SIST EN ISO 4625-1:2020

This document specifies the test methods for determining the softening point of resins (including rosin)
and similar materials by means of ring-and-ball apparatus.
Both manual and automated methods are specified, the automated method being the reference method.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3251:2019(Main)
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
SIST EN ISO 3251:2019

This document specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners, film-forming agents).
NOTE 1    The non-volatile-matter content of a product is not an absolute quantity but depends upon the temperature and period of heating used for the determination. Consequently, when using this method, only relative and not true values for non-volatile-matter content are obtained owing to solvent retention, thermal decomposition and evaporation of low molecular mass constituents. The method is therefore primarily intended for testing different batches of the same type of product.
NOTE 2    This method is suitable for synthetic rubber lattices, provided heating for a specific period of time is considered appropriate (ISO 124 specifies heating until the loss in mass of a 2 g test portion following successive periods of heating is less than 0,5 mg).
NOTE 3    In-house methods for determining non-volatile matter often include drying with infrared or microwave radiation. Standardization of such methods is not possible, since they are not generally applicable. Several polymer compositions tend to decompose during such treatment and therefore give incorrect results.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 150:2018(Main)
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018)
SIST EN ISO 150:2019

This document specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3681:2018(Main)
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)
SIST EN ISO 3681:2019

This document specifies a titrimetric method for determining the esterified-acid content in binders for paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained.
Because different binders vary in their resistance to saponification, this document is of limited applicability. If necessary, completeness of saponification can be checked by repeating the test under more severe conditions achieved by the use of longer saponification time, more concentrated potassium hydroxide solution, or a higher-boiling alcohol as solvent.
Annex A specifies a procedure suitable for binders that saponify with difficulty.
The method is not applicable to those materials that show further reaction with alkalis beyond normal saponification.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4629-1:2016(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016)
SIST EN ISO 4629-1:2016

ISO 4629-1:2016 specifies a titrimetric method for determining the free hydroxyl groups in binders and binder solutions for paints and varnishes. The hydroxyl groups may be present as polyhydric alcohols, partial esters, polyester end groups or hydroxylated fatty acids.
This method is not applicable to resins containing both hydroxyl groups and epoxy groups, because the latter will also be included in the result. Also the method is not applicable to cellulose nitrate or to phenolic resins.
NOTE 1       If, in the case of binder solutions, the hydroxyl value of the binder only is to be determined, the possibility that other constituents of the binder solution may contain hydroxyl groups has to be taken into account.
NOTE 2       A method for the determination of the hydroxyl value of epoxy resins is specified in ISO 7142[1].

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day