EN ISO 7142:2023

Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)

This document specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for use as binders for paints and varnishes.
The test methods described in this document are not intended for epoxy esters.

Bindemittel für Beschichtungsstoffe - Epoxidharze - Allgemeine Prüfverfahren (ISO 7142:2023)

Dieses Dokument legt allgemeine Prüfverfahren für Epoxidharze zur Verwendung in Beschichtungsstoffen und ähnlichen Produkten fest. Es ist ebenfalls anwendbar auf aus Epoxidharzen hergestellten Lösungen, die zur Verwendung als Bindemittel für Beschichtungsstoffe vorgesehen sind.
Die in diesem Dokument beschriebenen Prüfverfahren sind für Epoxidharzester nicht anwendbar.

Liants pour peintures et vernis - Résines époxydiques - Méthodes générales d'essai (ISO 7142:2023)

Le présent document spécifie des méthodes générales d’essai des résines époxydiques destinées à être utilisées dans les peintures, vernis et produits assimilés. Il s’applique également aux solutions de résines époxydiques prévues pour être utilisées comme liants pour peintures et vernis.
Les méthodes d’essai décrites dans le présent document ne sont pas destinées aux esters époxydiques.

Veziva za barve in lake - Epoksidne smole - Splošne metode preskušanja (ISO 7142:2023)

Standard ISO 7142:2007 določa splošne preskusne metode za uporabo epoksi smol v barvah, lakih in podobnih izdelkih. Velja tudi za raztopine iz epoksi smol, ki so predvidene za uporabo kot veziva za barve in lake.
Opisane preskusne metode niso namenjene epoksi-estrom.

General Information

• Status: Published
• Publication Date: 21-Feb-2023
• ICS: 87.060.20 - Binders
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Feb-2023
• Completion Date: 22-Feb-2023
• Ref Project: SIST EN ISO 7142:2023 - Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)

Relations

• Replaces: EN ISO 7142:2007 - Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2023
Nadomešča:
SIST EN ISO 7142:2007
Veziva za barve in lake - Epoksidne smole - Splošne metode preskušanja (ISO
7142:2023)
Binders for paints and varnishes - Epoxy resins - General methods of test (ISO
7142:2023)
Bindemittel für Beschichtungsstoffe - Epoxidharze - Allgemeine Prüfverfahren (ISO
7142:2023)
Liants pour peintures et vernis - Résines époxydiques - Méthodes générales d'essai
(ISO 7142:2023)
Ta slovenski standard je istoveten z: EN ISO 7142:2023
ICS:
87.060.20 Veziva Binders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7142
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2023
EUROPÄISCHE NORM
ICS 87.060.20 Supersedes EN ISO 7142:2007
English Version
Binders for paints and varnishes - Epoxy resins - General
methods of test (ISO 7142:2023)
Liants pour peintures et vernis - Résines époxydiques - Bindemittel für Beschichtungsstoffe - Epoxidharze -
Méthodes générales d'essai (ISO 7142:2023) Allgemeine Prüfverfahren (ISO 7142:2023)
This European Standard was approved by CEN on 20 January 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7142:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7142:2023) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2023, and conflicting national standards shall
be withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7142:2007.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7142:2023 has been approved by CEN as EN ISO 7142:2023 without any modification.

INTERNATIONAL ISO
STANDARD 7142
Third edition
2023-01
Binders for paints and varnishes —
Epoxy resins — General methods of
test
Liants pour peintures et vernis — Résines époxydiques — Méthodes
générales d'essai
Reference number
ISO 7142:2023(E)
ISO 7142:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 7142:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
5 Test methods . 2
6 Test report . 2
Annex A (normative) Hydroxyl value . .4
Bibliography . 7
iii
ISO 7142:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, in collaboration
with the European Committee for Standardization (CEN) Technical Committee CEN/TC 139, Paints and
varnishes, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This third edition cancels and replaces the second edition (ISO 7142:2007), which has been technically
revised.
The main changes are as follows:
— the concentration of the phenolphthale
...