EN ISO 16546:2020

Thermal insulating products for building applications - Determination of freeze-thaw resistance (ISO 16546:2020)

This document specifies the equipment and test method for determining the effects of successive cycling from dry conditions at −20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of thermal insulating products.
This document is intended to simulate the freeze?thaw effects on thermal insulating products which are frequently exposed to water and low temperature conditions, e.g. inverted roofs and unprotected ground insulation.

Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Frost-Tau-Wechselbeanspruchung (ISO 16546:2020)

Dieses Dokument legt die Prüfeinrichtungen und das Prüfverfahren zur Bestimmung der Auswirkungen zyklisch aufeinanderfolgender trockener Umgebungsbedingungen bei -20 °C und feuchter Umgebungs¬bedingungen bei 20 °C auf die mechanischen Eigenschaften und den Feuchtegehalt von Wärmedämmstoffen fest.
Zweck dieses Dokuments ist die Simulation der Auswirkungen von Frost-Tau-Wechselbeanspruchungen auf Wärmedämmstoffe, die häufig Wasser und niedrigen Temperaturen ausgesetzt werden, wie z. B. im „Umkehrdach“ und bei der ungeschützten Wärmedämmung zum Erdreich.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance aux effets du gel-dégel (ISO 16546:2020)

Le présent document spécifie l'équipement et la méthode d'essai permettant de déterminer les effets sur les propriétés mécaniques et la teneur en eau du produit de cycles successifs entre des conditions sèches à −20 °C et des conditions humides à 20 °C. Il s'applique aux produits isolants thermiques.
L'objet du présent document est la simulation des effets du gel-dégel sur les produits isolants thermiques fréquemment exposés à l'eau et à de basses températures, par exemple, en toiture inversée ou en isolation au contact direct de la terre.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje odpornosti proti ponavljajočemu zamrzovanju in taljenju (ISO 16546:2020)

General Information

• Status: Published
• Publication Date: 07-Jul-2020
• Withdrawal Date: 30-Jan-2021
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 1 - Common general test methods
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-Jul-2020
• Completion Date: 08-Jul-2020
• Ref Project: SIST EN ISO 16546:2020 - Thermal insulating products for building applications - Determination of freeze-thaw resistance (ISO 16546:2020)

Relations

• Replaces: EN 12091:2013 - Thermal insulating products for building applications - Determination of freeze-thaw resistance
• Effective Date: 21-Feb-2024

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16546:2020
01-oktober-2020
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje odpornosti
proti ponavljajočemu zamrzovanju in taljenju (ISO 16546:2020)
Thermal insulating products for building applications - Determination of freeze-thaw
resistance (ISO 16546:2020)
Wärmedämmstoffe für das Bauwesen - Bestimmung des Verhaltens bei Frost-Tau-
Wechselbeanspruchung (ISO 16546:2020)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
résistance aux effets du gel-dégel (ISO 16546:2020)
Ta slovenski standard je istoveten z: EN ISO 16546:2020
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 16546:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16546:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 16546:2020


EN ISO 16546
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2020
EUROPÄISCHE NORM
ICS 91.100.60
English Version

Thermal insulating products for building applications -
Determination of freeze-thaw resistance (ISO 16546:2020)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de la résistance aux effets des Verhaltens bei Frost-Tau-Wechselbeanspruchung
du gel-dégel (ISO 16546:2020) (ISO 16546:2020)
This European Standard was approved by CEN on 21 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16546:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 16546:2020
EN ISO 16546:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 16546:2020
EN ISO 16546:2020 (E)
European foreword
This document (EN ISO 16546:2020) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 16546:2020 has been approved by CEN as EN ISO 16546:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 16546:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 16546:2020
INTERNATIONAL ISO
STANDARD 16546
...