EN 3545-007:2005

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard

This standard specifies cable clamp in the family of rectangular electrical connectors with sealed and non sealed rear, plastic housing, locking device, for operating temperatures from - 55 °C to 175 °C.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 007: Zugentlastungsklemme - Produktnorm

Diese Norm legt den Kabelhalter für Zugentlastung aus der Familie der elektrischen Rechtecksteckverbinder, rückseitig abgedichtet und nicht abgedichtet, mit Plastikgehäuse und Verriegelung, für Betriebstemperaturen von  55 °C bis 175 °C fest.

Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 007 : Serre-câble - Norme de produit

Aeronavtika – Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastičnim ohišjem, zapornim mehanizmom, z delovno temperaturo med –55 °C in 175 °C – 007. del: Kabelska sponka – Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 15-Nov-2005
• Withdrawal Date: 16-Dec-2014
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Dec-2014
• Ref Project: SIST EN 3545-007:2006 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard

Relations

• Replaced By: EN 3545-007:2014 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard
• Effective Date: 23-Jul-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standardSérie aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches a l'arriere, a boîtier en plastique, a verrouillage, températures d'utilisation - 55 °C a 175 °C - Partie 007 : Serre-câble - Norme de produitLuft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 007: Zugentlastungsklemme - ProduktnormTa slovenski standard je istoveten z:EN 3545-007:2005SIST EN 3545-007:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3545-007:200601-julij-2006

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3545-007
November 2005 ICS 49.060 English Version
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 007 : Serre-câble - Norme de produit
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehüse, Verriegelunssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 007: Zugentlastungsklemme - Produktnorm This European Standard was approved by CEN on 26 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3545-007:2005: E
...