EN 10249-1:1995

Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions

This part of this European Standard specifies the requirements for cold formed non alloy steel sheet piling produced from hot rolled strip or sheet with a thickness equal to or greater than 2mm in respect of its chemical composition, mechanical and technological properties and delivery conditions. The products specified are for general, structural and civil engineering works. Requirements concerning the tolerances on shape and dimensions are specified in Part 2 of this European Standard.

Kaltgeformte Spundbohlen aus unlegierten Stählen - Teil 1: Technische Lieferbedingungen

Dieser Teil der Europäischen Norm enthält die Anforderungen an kaltgeformte, unlegierte Stahlspundbohlen aus warmgewalztem Band oder Blech mit einer Dicke >= 2mm hinsichtlich ihrer chemischen Zusammensetzung, mechanischen und technologischen Eigenschaften und Lieferbedingungen. Die Erzeugnisse nach dieserEuropäischen Norm eignen sich für allgemeine Zwecke, Stahlbau und Tiefbauarbeiten. Die Festlegungen für die Grenzabmaße und Formtoleranzen sind im Teil 2 dieser Europäischen Norm enthalten.

Palplanches profilées à froid en aciers non alliés - Partie 1: Conditions techniques de livraison

La présente partie de cette norme européenne spécifie les prescriptions relatives à la composition chimique, aux caractéristiques mécaniques et technologiques et aux conditions de livaison pour les palplanches profilées à froid en aciers non alliés, fabriquées à partir de bandes ou tôles laminées à chaud d'épaisseur égale ou supérieure à 2mm. Les produits spécifiés sont destinés à être utilisés dans la réalisation d'ouvrages divers, d'ouvrages de génie civil et d'éléments de construction.

Hladno oblikovana obešala iz nelegiranih jekel - 1. del: Tehnični dobavni pogoji

General Information

• Status: Published
• Publication Date: 14-Jun-1995
• Withdrawal Date: 30-Dec-1995
• ICS: 77.140.70 - Steel profiles
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: ECISS/TC 10/SC 4 - Sheet piling
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Start Date: 21-Apr-2005
• Completion Date: 21-Apr-2005
• Ref Project: SIST EN 10249-1:1998 - Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions

Relations

• Revised: prEN 10249-1 - Cold formed steel sheet piling - Part 1: Technical delivery conditions
• Effective Date: 18-Jan-2023
• Revised: EN 10249-1:2023 - Cold formed steel sheet piles - Part 1: Technical delivery conditions
• Effective Date: 16-Dec-2020

Overview

EN 10249-1:1995 is a European Standard published by CEN that specifies the technical delivery conditions for cold formed sheet piling made from non-alloy steels. This part applies to sheet piling produced from hot-rolled strip or sheet with a thickness ≥ 2 mm and is intended for general, structural and civil engineering works. The standard focuses on requirements for chemical composition, mechanical and technological properties and delivery procedures.

Key Topics

The standard addresses the following core topics:

• Material origin: Cold formed sheet piling manufactured from hot-rolled strip or sheet.
• Material type: Non-alloy (unalloyed) steels suitable for cold forming.
• Thickness: Products with thickness equal to or greater than 2 mm.
• Properties specified:
  • Chemical composition requirements to ensure material consistency and performance.
  • Mechanical properties to define strength and deformation characteristics relevant to piling use.
  • Technological properties covering cold forming and fabrication suitability.
• Delivery conditions: Requirements for packaging, marking, documentation and conformity at the point of delivery.

Note: Tolerances on shape and dimensions for sheet piling are handled in Part 2 of EN 10249 and are not covered in this Part 1.

Applications

EN 10249-1:1995 is primarily used by manufacturers, specifiers and contractors involved in foundation works and earth-retention systems. Typical practical applications include:

• Sheet piling for temporary and permanent retaining structures used in civil engineering (e.g., cofferdams, flood defenses).
• Structural and geotechnical applications where consistent material properties and reliable delivery documentation are required.
• Procurement and quality control: Buyers can reference the standard to ensure materials meet agreed chemical and mechanical criteria before acceptance.

Benefits of applying EN 10249-1:1995:

• Improved consistency in material quality and traceability.
• Clear vendor and purchaser expectations for delivery and documentation.
• Reduced risk of material nonconformity in structural and civil projects.

Related Standards

• EN 10249-2: Addresses tolerances on shape and dimensions for cold formed sheet piling (refer to Part 2 for dimensional tolerances).
• Other CEN and national standards on steel specifications and testing (consult applicable regional or project-specific standards for complementary requirements).

For procurement, design and manufacturing teams, EN 10249-1:1995 provides a concise set of technical delivery conditions that help align material production with the operational needs of structural and civil engineering sheet piling applications.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgeformte Spundbohlen aus unlegierten Stählen - Teil 1: Technische LieferbedingungenPalplanches profilées a froid en aciers non alliés - Partie 1: Conditions techniques de livraisonCold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jek
...