EN 10248-1:2023

Hot-rolled steel sheet piles - Part 1: Technical delivery conditions

This document specifies the requirements for hot rolled steel sheet piles in respect of its chemical composition, mechanical properties and conditions of delivery.
The products specified are for general, structural and civil engineering works. The types of steel sheet piles covered by this document are: Z-shaped, U-shaped, straight web, H-shaped with their interlocking bars. The types of interlocks and the requirements in respect of tolerances on shape and dimensions are specified in Part 2 of this document.

Warmgewalzte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen

Dieses Dokument legt Anforderungen an warmgewalzte Spundbohlen aus Stahl hinsichtlich ihrer chemischen Zusammensetzung, mechanischen Eigenschaften und Lieferbedingungen fest.
Die angegebenen Erzeugnisse eignen sich für allgemeine Zwecke, Stahlbau und Tiefbauarbeiten. Dieses Dokument behandelt folgende Formen von Stahlspundbohlen: Z-Profil, U-Profil, Flachprofil, H-Profil mit ihren Verbindungsschlössern. Die Formen der Schlösser und die Festlegungen bezüglich der Grenzabmaße und Formtoleranzen sind in Teil 2 dieses Dokumentes enthalten.

Palplanches en acier laminées à chaud - Partie 1: Conditions techniques de livraison

Le présent document spécifie les prescriptions relatives à la composition chimique, aux caractéristiques mécaniques et aux conditions de livraison des palplanches en acier laminées à chaud.
Les produits désignés sont destinés à être utilisés dans la réalisation d'ouvrages divers, d'ouvrages de génie civil et d'éléments de construction. Les types de palplanches en acier couverts dans le présent document sont : les palplanches en Z, en U, plates, en H avec leurs serrures. Les types de serrures et les prescriptions relatives aux tolérances sur forme et dimensions sont spécifiés dans la Partie 2 du présent document.

Vroče valjana jeklena obešala - 1. del: Tehnični dobavni pogoji

Ta dokument določa zahteve za pilote iz vroče valjanega jekla glede na njegovo kemično sestavo, mehanske lastnosti in dobavne pogoje. Navedeni izdelki so namenjeni za splošna, konstrukcijska in gradbena dela. Vrste pilotov iz jeklene pločevine, ki jih zajema ta standard, so: Jeklena pločevina v obliki črke Z, črke U, ravne mreže, obliki črke H s prepletenimi palicami

General Information

• Status: Published
• Publication Date: 07-Mar-2023
• ICS: 77.140.70 - Steel profiles
• Technical Committee: ECISS/TC 103 - Structural steels other than reinforcements
• Drafting Committee: CEN/TC 459/SC 3/WG 1 - Sheet piles
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-Mar-2023
• Due Date: 09-Nov-2022
• Completion Date: 08-Mar-2023
• Ref Project: SIST EN 10248-1:2023 - Hot-rolled steel sheet piles - Part 1: Technical delivery conditions

Relations

• Replaces: EN 10248-1:1995 - Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
• Effective Date: 16-Dec-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10248-1:2023
01-maj-2023
Vroče valjana jeklena obešala - 1. del: Tehnični dobavni pogoji
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
Warmgewalzte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Palplanches en acier laminées à chaud - Partie 1: Conditions techniques de livraison
Ta slovenski standard je istoveten z: EN 10248-1:2023
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
SIST EN 10248-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 10248-1:2023

---------------------- Page: 2 ----------------------
SIST EN 10248-1:2023


EN 10248-1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2023
EUROPÄISCHE NORM
ICS 77.140.70 Supersedes EN 10248-1:1995
English Version

Hot-rolled steel sheet piles - Part 1: Technical delivery
conditions
Palplanches en acier laminées à chaud - Partie 1: Warmgewalzte Spundbohlen aus Stahl - Teil 1:
Conditions techniques de livraison Technische Lieferbedingungen
This European Standard was approved by CEN on 17 January 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10248-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 10248-1:2023
EN 10248-1:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Classification and designation . 6
4.1 Classification. 6
4.2 Designation . 6
5 Information to be supplied by the purchaser . 6
5.1 Mandatory information . 6
5.2 Options . 7
6 Manufacturing process . 7
6.1 Steel making process . 7
6.2 Delivery conditions . 7
7 Requirements . 7
7.1 General.
...