EN ISO 10893-7:2019
(Main)Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
This document specifies the requirements for digital radiographic X-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDAs) of the longitudinal or helical weld seams of automatic fusion arc-welded steel tubes for the detection of imperfections. This document specifies acceptance levels and calibration procedures.
It can also be applicable to the testing of circular hollow sections.
NOTE As an alternative, see ISO 10893-6 for film-based radiographic X-ray testing.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Digitale Durchstrahlungsprüfung der Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten (ISO 10893-7:2019)
Dieses Dokument legt die Anforderungen an die digitale Durchstrahlungsprüfung von automatisiert
hergestellten Längs- oder Spiralnähten lichtbogenschmelzgeschweißter Stahlrohre fest, die zum Nachweis
von Unvollkommenheiten entweder mittels Computer-Radiographie (CR) oder mittels digitaler
Detektorarrays (DDAs) durchgeführt werden. Dieses Dokument legt die Zulässigkeitsgrenzen und die
Kalibrierverfahren fest.
Dieses Dokument kann auch für die Prüfung von kreisförmigen Hohlprofilen angewendet werden.
ANMERKUNG Als alternatives Verfahren ist in ISO 10893-6 die filmbasierte Durchstrahlungsprüfung festgelegt.
Essais non destructifs des tubes en acier - Partie 7: Contrôle par radiographie numérique du cordon de soudure des tubes en acier soudés pour la détection des imperfections (ISO 10893-7:2019)
Le présent document spécifie les exigences relatives au contrôle radiographique numérique par rayons X des cordons de soudure longitudinaux ou hélicoïdaux des tubes en acier soudés en automatique par fusion à l'arc pour la détection des imperfections, soit par radiographie numérisée (CR) soit par radiographie avec des mosaïques de détecteurs numériques. Le présent document spécifie les niveaux d'acceptation et les procédures d'étalonnage.
Il peut s'appliquer également au contrôle des profils creux circulaires.
NOTE De manière alternative, voir la norme ISO 10893‑6 pour les essais radiographiques sur film.
Neporušitveno preskušanje jeklenih cevi - 7. del: Ugotavljanje napak varov pri jeklenih ceveh, obločno varjenih pod praškom, z digitalno radiografsko preiskavo (ISO 10893-7:2019)
Ta dokument določa zahteve za ugotavljanje napak vzdolžnih ali vijačnih varov pri avtomatsko talilno obločno varjenih jeklenih ceveh z digitalno radiografsko rentgensko preiskavo z računalniško radiografijo (CR) ali radiografijo z digitalnimi detektorskimi nizi (DDA). Ta dokument določa ravni sprejemljivosti in postopke umerjanja.
Lahko se uporablja tudi za preskušanje krožnih votlih profilov.
OPOMBA: Za alternativne metode glej standard ISO 10893-6 za radiografsko rentgensko preiskavo na podlagi filma.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10893-7:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 10893-7:2011
1HSRUXãLWYHQRSUHVNXãDQMHMHNOHQLKFHYLGHO 8JRWDYOMDQMHQDSDNYDURYSUL
MHNOHQLKFHYHKREORþQRYDUMHQLKSRGSUDãNRP]GLJLWDOQRUDGLRJUDIVNRSUHLVNDYR
,62
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld
seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Digitale Durchstrahlungsprüfung der
Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten (ISO
10893-7:2019)
Essais non destructifs des tubes en acier - Partie 7: Contrôle radiographique numérique
du cordon de soudure des tubes en acier soudés pour la détection des imperfections
(ISO 10893-7:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-7:2019
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN ISO 10893-7:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10893-7:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 10893-7:2019
EN ISO 10893-7
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 23.040.10; 77.040.20; 77.140.75 Supersedes EN ISO 10893-7:2011
English Version
Non-destructive testing of steel tubes - Part 7: Digital
radiographic testing of the weld seam of welded steel
tubes for the detection of imperfections (ISO 10893-
7:2019)
Essais non destructifs des tubes en acier - Partie 7: Zerstörungsfreie Prüfung von Stahlrohren - Teil 7:
Contrôle par radiographie numérique du cordon de Digitale Durchstrahlungsprüfung der Schweißnaht
soudure des tubes en acier soudés pour la détection geschweißter Stahlrohre zum Nachweis von
des imperfections (ISO 10893-7:2019) Unvollkommenheiten (ISO 10893-7:2018)
This European Standard was approved by CEN on 29 December 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-7:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10893-7:2019
EN ISO 10893-7:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10893-7:2019
EN ISO 10893-7:2019 (E)
European foreword
This document (EN ISO 10893-7:2019) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel fittings” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10893-7:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.