Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatisierte Wirbelstromprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum Nachweis von Unvollkommenheiten - Änderung 1: Änderung der Maße der Bezugsnut; Änderung der Zulässigkeitskriterien (ISO 10893-2:2011/Amd 1:2020)

No scope available

Essais non destructifs des tubes en acier - Partie 2: Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions de l'entaille de référence; changement des critères d'acceptation (ISO 10893-2:2011/Amd 1:2020)

Neporušitveno preskušanje jeklenih cevi - 2. del: Ugotavljanje napak nevarjenih in varjenih jeklenih cevi (razen obločno varjenih pod praškom) z avtomatizirano preiskavo z vrtinčnimi tokovi - Dopolnilo A1: Sprememba dimenzij zareze - sprememba meril sprejemljivosti (ISO 10893-2:2011/Amd 1:2020)

General Information

Status
Published
Publication Date
02-Jun-2020
Withdrawal Date
30-Dec-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Jun-2020
Completion Date
03-Jun-2020

Relations

Buy Standard

Amendment
EN ISO 10893-2:2011/A1:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2020
Neporušitveno preskušanje jeklenih cevi - 2. del: Ugotavljanje napak nevarjenih in
varjenih jeklenih cevi (razen obločno varjenih pod praškom) z avtomatizirano
preiskavo z vrtinčnimi tokovi - Dopolnilo A1: Sprememba dimenzij zareze -
sprememba meril sprejemljivosti (ISO 10893-2:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of
seamless and welded (except submerged arc-welded) steel tubes for the detection of
imperfections - Amendment 1: Change of dimensions of the reference notch - change
acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatisierte Wirbelstromprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) Stahlrohre zum
Nachweis von Unvollkommenheiten - Änderung 1 (ISO 10893-2:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 2: Contrôle automatisé par courants de
Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés
(sauf à l'arc immergé sous flux en poudre) - Amendement 1: Changement de dimensions
de l'entaille de référence; changement des critères d'acceptation (ISO 10893-
2:2011/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-2:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10893-2:2011/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 77.140.75; 77.040.20; 23.040.10
English Version
Non-destructive testing of steel tubes - Part 2: Automated
eddy current testing of seamless and welded (except
submerged arc-welded) steel tubes for the detection of
imperfections - Amendment 1: Change of dimensions of
the reference notch; change acceptance criteria (ISO
10893-2:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 2: Zerstörungsfreie Prüfung von Stahlrohren - Teil 2:
Contrôle automatisé par courants de Foucault pour la Automatisierte Wirbelstromprüfung nahtloser und
détection des imperfections des tubes en acier sans geschweißter (ausgenommen
soudure et soudés (sauf à l'arc immergé sous flux en unterpulvergeschweißter) Stahlrohre zum Nachweis
poudre) - Amendement 1: Changement de dimensions von Unvollkommenheiten - Änderung 1 (ISO 10893-
de l'entaille de référence; changement des critères 2:2011/Amd 1:2020)
d'acceptation (ISO 10893-2:2011/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 10893-2:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-2:2011/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10893-2:2011/A1:2020) has been prepared by Technical Committee ISO/TC 17
"Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel
fittings” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 10893-2:2011 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2020,
and conflicting national standards shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, F
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.