EN ISO 10893-7:2011

Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)

ISO 10893-7:2011 specifies the requirements for digital radiographic X-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDA) of the longitudinal or helical weld seams of automatic fusion arc-welded steel tubes for the detection of imperfections. ISO 10893-7:2011 specifies acceptance levels and calibration procedures.
ISO 10893-7:2011 can also be applicable to the testing of circular hollow sections.

Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Digitale Durchstrahlungsprüfung der Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten (ISO 10893-7:2011)

Dieser Teil der ISO 10893 legt die Anforderun¬gen an die digitale Durchstrahlungsprüfung von automatisiert hergestellten Längs- oder Spiralnähten lichtbogenschmelzgeschweißte Stahlrohre fest, die zum Nachweis von Unvollkommenheiten entweder mittels Computer-Radiographie (CR) oder mittels digitaler Detektorarrays (DDA) durchgeführt werden. Dieser Teil der ISO 10893 legt die Zulässigkeitsgrenzen und die Kalibrierverfahren fest.
Dieses Dokument kann auch für die Prüfung von kreisförmigen Hohlprofilen angewendet werden.

Essais non destructifs des tubes en acier - Partie 7: Contrôle radiographique numérique du cordon de soudure des tubes en acier soudés pour la détection des imperfections (ISO 10893-7:2011)

L'ISO 10893-7:2011 spécifie les exigences relatives au contrôle radiographique numérique par rayons X des cordons de soudure longitudinaux ou hélicoïdaux des tubes en acier soudés en automatique par fusion à l'arc pour la détection des imperfections, soit par radiographie numérisée (CR) soit par radiographie avec des mosaïques de détecteurs numériques (DDA). L'ISO 10893-7:2011 spécifie les niveaux d'acceptation et les procédures d'étalonnage.
Elle est également applicable au contrôle des profils creux circulaires.

Neporušitveno preskušanje jeklenih cevi - 7. del: Ugotavljanje napak varov pri jeklenih ceveh, obločno varjenih pod praškom, z digitalno radiografsko preiskavo (ISO 10893-7:2011)

Ta del ISO 10893 določa zahteve za ugotavljanje napak vzdolžnih ali heličnih varov pri avtomatsko talilno obločno varjenih jeklenih ceveh z digitalno radiografsko rentgensko preiskavo z računalniško radiografijo (CR) ali radiografijo z digitalnimi detektorskimi nizi (DDA). Ta del ISO 10893 določa stopnje sprejemljivosti in kalibracijske postopke. Ta del ISO 10893 lahko velja tudi za preskušanje krožnih votlih delov.

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2011
• Withdrawal Date: 12-Mar-2019
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 25.160.40 - Welded joints and welds
• ICS: 77.040.20 - Non-destructive testing of metals
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 10 - Non-destructive testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Mar-2019
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN ISO 10893-7:2011 - Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)

Relations

• Replaced By: EN ISO 10893-7:2019 - Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
• Effective Date: 20-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-7:2011
01-november-2011
1HSRUXãLWYHQRSUHVNXãDQMHMHNOHQLKFHYLGHO8JRWDYOMDQMHQDSDNYDURYSUL
MHNOHQLKFHYHKREORþQRYDUMHQLKSRGSUDãNRP]GLJLWDOQRUDGLRJUDIVNRSUHLVNDYR
,62
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld
seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Digitalisierte Durchstrahlungsprüfung
der Schweißnaht geschweißter Stahlrohre zum Nachweis von Unregelmäßigkeiten (ISO
10893-7:2011)
Essais non destructifs des tubes en acier - Partie 7: Contrôle radiographique numérique
du cordon de soudure des tubes en acier soudés pour la détection des imperfections
(ISO 10893-7:2011)
Ta slovenski standard je istoveten z: EN ISO 10893-7:2011
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-7:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10893-7:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 10893-7:2011


EUROPEAN STANDARD
EN ISO 10893-7

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2011
ICS 23.040.10; 77.040.20; 77.140.75
English Version
Non-destructive testing of steel tubes - Part 7: Digital
radiographic testing of the weld seam of welded steel tubes for
the detection of imperfections (ISO 10893-7:2011)
Essais non destructifs des tubes en acier - Partie 7: Zerstörungsfreie Prüfung von Stahlrohren - Teil 7: Digitale
Contrôle radiographique numérique du cordon de soudure Durchstrahlungsprüfung der Schweißnaht geschweißter
des tubes en acier soudés pour la détection des Stahlrohre zum Nachweis von Unvollkommenheiten (ISO
imperfections (ISO 10893-7:2011) 10893-7:2011)
This European Standard was approved by CEN on 10 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-7:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10893-7:2011
EN ISO 10893-7:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10893-7:2011
EN ISO 10893-7:2011 (E)
Foreword
This document (EN ISO 10893-7:2011) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings” the secretariat
of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at
the latest by October 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the Unit
...