EN ISO 9856:1995

Conveyor belts - Determination of elastic modulus (ISO 9856:1989)

Migrated from Progress Sheet (TC Comment) (2000-07-10): TC 188 decided at its 3rd  meeting on 1992-10-08/09 to submit ISO 9856 to the ++ UAP procedure. ++ Doc. has been given to PTE for UAP on 1994-05-20.

Fördergurte - Bestimmung des Elastizitätsmoduls (ISO 9856:1989)

Diese Internationale Norm spezifiziert ein Verfahren zur Bestimmung des Elastizitätsmoduls eines Fördergurts. Anmerkung: Der Elastizitätsmodul wird als wesentlicher Faktor bei der Errechnung der Übergangsabstände nach ISO 5293 benutzt.

Courroies transporteuses - Détermination du module d'élasticité (ISO 9856:1989)

Trakovi tračnih transporterjev - Določitev modula elastičnosti (ISO 9856:1989)

General Information

• Status: Withdrawn
• Publication Date: 17-Oct-1995
• Withdrawal Date: 14-Dec-2003
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 1 - Technical test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2003
• Completion Date: 15-Dec-2003
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 9856:1997 - Conveyor belts - Determination of elastic modulus (ISO 9856:1989)

Relations

• Replaced By: EN ISO 9856:2003 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9856:1997
01-marec-1997
7UDNRYLWUDþQLKWUDQVSRUWHUMHY'RORþLWHYPRGXODHODVWLþQRVWL,62
Conveyor belts - Determination of elastic modulus (ISO 9856:1989)
Fördergurte - Bestimmung des Elastizitätsmoduls (ISO 9856:1989)
Courroies transporteuses - Détermination du module d'élasticité (ISO 9856:1989)
Ta slovenski standard je istoveten z: EN ISO 9856:1995
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 9856:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9856:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 9856:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 9856:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 9856:1997
INTERNATIONAL
IS0
STANDARD 9856
First edition
1989-07-01
Determination of elastic
Conveyor belts -
modulus
06 termination du module d Was ticit
Courroies transporteuses -
Reference number
IS0 9856 : 1989 (El

---------------------- Page: 5 ----------------------

SIST EN ISO 9856:1997
IS0 9856 : 1989 E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 9856 was prepared by Technical Committee ISO/TC 41,
Pulleys and belts (including veebelts).
Annex A of this International Standard is for information only.
0 IS0 1989
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in
writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 9856:1997
INTERNATIONAL STANDARD IS0 9856 : 1989 (E)
Determination of elastic modulus
Conveyor belts -
1 Scope 4.2 Extensometer, with a measuring length of at least
100 mm and accurate to at least 0,l mm.
This International Standard specifies a method for determining
the elastic modulus of a conveyor belt.
4.3 Recording device, to record the curve of tensile stress
as a function of elongation.
NOTE - The elastic modulus is notably used in the calculation of tran-
sition distances in accordance with IS0 5293. .
5 Test pieces
2 Normative references
5.1 Shape and dimensions
The following standards contain provisions which, through
The test piece cut from the full thickness of the belt in the
reference in this text, constitute provisions of this International
longitudinal direction shall be rectangular. Its width shall be
Standard. At the time of publication, the editions indicated
50 mm and its length at least 300 mm plus twice the necessary
were valid. All standards are subject to revision, and parties to
clamping zone length.
agreements based on this International Standard are encouraged
to investigate the possibility of applying the most recent editions
5.2 Number and conditioning of test pieces
of the standards listed below. Members of IEC and IS0 main-
tain registers of currently valid International Standards.
From the same sample obtained in accordance with IS0 282,
take the three following test pieces according to the require-
IS0 282 : 1975, Conveyor belts
...