EN 15022-4:2011

Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)

This European Standard specifies a flame atomic absorption spectrometric method (FAAS) for the determination of the tin content of copper and copper alloys in the form of unwrought, wrought and cast products.
The method is applicable to products having medium tin mass fractions between 0,2 % and 3,0 %.

Kupfer und Kupferlegierungen - Bestimmung des Zinngehaltes - Teil 4: Mittlerer Zinngehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)

Diese Europäische Norm legt ein flammenatomabsorptionsspektrometrisches Verfahren (FAAS) für die Bestimmung des Zinngehaltes in Kupfer und Kupferlegierungen fest, die als Gussstücke oder als plastisch oder nicht plastisch geformte Produkte vorliegen. Das Verfahren ist geeignet für Produkte mit Zinn-Massenanteilen zwischen 0,2 % und 3,0 %.

Cuivre et alliages de cuivre - Détermination de la teneur en étain - Partie 4: Étain en moyenne teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)

La présente Norme européenne spécifie une méthode par spectrométrie d'absorption atomique dans la flamme
(SAAF) pour la détermination de la teneur en étain dans le cuivre et les alliages de cuivre sous la forme de produits
non corroyés, corroyés et moulés.
La méthode est applicable aux produits ayant une teneur moyenne en étain comprise entre 0,2 % et 3,0 % (fraction
en masse).

Baker in bakrove zlitine - Določevanje kositra - 4. del: Srednja količina kositra - Metoda s plamensko atomsko absorpcijsko spektrometrijo (FAAS)

Ta evropski standard določa metodo z uporabo spektrometrije s plamensko atomsko absorpcijo (FAAS) za določevanje kositra v bakru in bakrovih zlitinah v obliki negnetenih, gnetenih in ulitih polizdelkov. Metoda velja za polizdelke s srednjim masnim deležem kositra med 0,2 % in 3,0 %.

General Information

• Status: Published
• Publication Date: 01-Nov-2011
• Withdrawal Date: 30-May-2012
• ICS: 77.120.30 - Copper and copper alloys
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 10 - Methods of analysis
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 06-Apr-2023
• Ref Project: SIST EN 15022-4:2012 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)

Relations

• Replaces: CEN/TS 15022-4:2006 - Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS)
• Effective Date: 28-Nov-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kupfer und Kupferlegierungen - Bestimmung des Zinngehaltes - Teil 4: Mittlerer Zinngehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)Cuivre et alliages de cuivre - Dosage de l'étain - Partie 4: Etain en moyenne teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)77.120.30Baker in bakrove zlitineCopper and copper alloysICS:Ta slovenski standard je istoveten z:EN 15022-4:2011SIST EN 15022-4:2012en,de01-januar-2012SIST EN 15022-4:2012SLOVENSKI
STANDARDSIST-TS CEN/TS 15022-4:20071DGRPHãþD



SIST EN 15022-4:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15022-4
November 2011 ICS 77.120.30 Supersedes CEN/TS 15022-4:2006English Version
Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
Cuivre et alliages de cuivre - Détermination de la teneur en étain - Partie 4: Étain en moyenne teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)
Kupfer und Kupferlegierungen - Bestimmung des Zinngehaltes - Teil 4: Mittlerer Zinngehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS) This European Standard was approved by CEN on 24 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15022-4:2011: ESIST EN 15022-4:2012



EN 15022-4:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Principle .44Reagents .45Apparatus .56Sampling .57Procedure .57.1Preparation of the test portion solution .57.1.1Test portion .57.1.2Test portion solution .57.2Blank test .57.3Check test .57.4Establishment of the calibration curve .67.
...