EN 14296:2005
(Main)Sanitary appliances - Communal washing troughs
Sanitary appliances - Communal washing troughs
This standard specifies requirements for the cleanability, load resistance and durability of communal washing troughs for domestic purposes.
NOTE For the purposes of this standard the term "domestic purposes" includes use in factory changing-rooms, sportsclubs, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
Sanitärausstattungsgegenstände - Reihenwaschanlagen
Diese Europäische Norm legt Anforderungen an die Reinigbarkeit, statische Belastbarkeit und Dauerhaftigkeit
von Reihenwaschanlagen für den Hausgebrauch fest.
ANMERKUNG Im Sinne dieser Norm schließt der Begriff �für den Hausgebrauchil den Einsatz in Werksumkleide-
räumen, Sportklubs, Studentenwohnheimen, Krankenhäusern und ähnlichen Einrichtungen ein; ausgenommen ist die
medizinische Verwendung.
Appareils sanitaires - Lavabos collectifs
La présente Norme européenne spécifie les prescriptions de performance en matière d�aptitude au nettoyage,
de résistance à la charge et de durabilité des lavabos collectifs à usage domestique.
NOTE Pour les besoins de la présente Norme européenne, les termes « à usage domestique » recouvrent les
usages dans les vestiaires des usines, des salles de sport, des foyers pour étudiants, des hôpitaux et autres bâtiments
similaires sauf s�ils font l�objet de dispositions médicales particulières.
Sanitarna oprema – Skupinska umivalna korita
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitary appliances - Communal washing troughsSanitarna oprema – Skupinska umivalna koritaAppareils sanitaires - Lavabos collectifsSanitärausstattungsgegenstände - ReihenwaschanlagenTa slovenski standard je istoveten z:EN 14296:2005SIST EN 14296:2005de91.140.70ICS:SLOVENSKI
STANDARDSIST EN 14296:200501-september-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14296May 2005ICS 91.140.70English versionSanitary appliances - Communal washing troughsAppareils sanitaires - Lavabos collectifsSanitärausstattungsgegenstände - ReihenwaschanlagenThis European Standard was approved by CEN on 25 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14296:2005: E
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.13 Bibliography.17
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 1a — Installation for load test - Test on the rim - Wall mounted trough, viewed from the side
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 1b — Installation for load test - Test on the rim - Wall mounted trough, viewed from above
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 1c — Installation for load test - Test on the rim - Free standing trough, viewed from the side
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 1d — Installation for load test - Test on the rim - Free standing trough, viewed from above Note any crack, collapse or permanent distortion preventing water from draining trough the waste hole. 5.2.3 Localised load on the rim Apply a load of 751,50+kg in the middle of the rim, as shown in Figures 2a, 2b, 2c and 2d. Reinforced cloth bags filled with lead shot, iron shot or sand shall be used. The load shall remain in position for a minimum period of 1 h.
Key 1 Three bags of 250,50+kg or six bags of 12,50,250+kg Figure 2a — Installation for load test - Test on the rim - Wall mounted trough, viewed from the side
Key 1 Three bags of 250,50+kg or six bags of 12,50,250+kg Figure 2b — Installation for load test - Test on the rim - Wall mounted trough, viewed from above
Key 1 Three bags of 250,50+kg or six bags of 12,50,250+kg Figure 2c — Installation for load test - Test on the rim - Free standing trough, viewed from the side
Key 1 Three bags of 250,50+kg or six bags of 12,50,250+kg Figure 2d — Installation for load test - Test on the rim - Free standing trough, viewed from above Note any crack, or collapse of the trough. 5.2.4 Test on the bottom Apply an evenly distributed load of 250,50+kg every 50 cm on the bottom, as shown in Figures 3a, 3b, 3c and 3d with a minimum total loading of 75 kg. Reinforced cloth bags filled with lead shot, iron shot or sand shall be used. The load shall remain in position for a minimum period of 1 h.
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 3a — Installation for load test - Test on the bottom - Wall mounted trough, viewed from the side
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 3b — Installation for load test - Test on the bottom - Wall mounted trough - Viewed from above
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 3c — Installation for load test - Test on the bottom - Free standing trough, viewed from the side
Key 1 One bag of 250,50+kg or two bags of 12,50,250+kg Figure 3d — Installation for load test - Test on the bottom - Free standing trough, viewed from above Note any crack, collapse or permanent distortion of the trough preventing water from draining through the waste hole. 6 Marking and product designation All communal washing troughs shall be designated in accordance with the following system: EN 14296 — CA — LR — DA Number of standard Cleanability Load resistance Durability NOTE For CE marking, see Annex ZA. 7 Evaluation of conformity 7.1 General The compliance of a communal washing trough with the requirements of this standard shall be demonstrated by: initial type testing; (7.2). factory production control by the manufacturer; (7.3).
An FPC system conforming with the requirements of the relevant part(s) of EN ISO 9000, and made specific to the requirements of this standard, is considered to satisfy the above requirements. The results of inspections, tests and assessments requiring action shall be recorded. The actions taken when control values or criteria are not met shall be recorded.
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive ZA.1 Scope and relevant characteristics This European Standard has been prepared under Mandate M/1101) given to CEN by the European Commission and the European Free Trade Associat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.