EN 14303:2015/prA1
(Amendment)Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
This amendment modifies EN 14303:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR).
This amendment introduces:
a) an update for the normative references;
b) the adaption of 4.3.10 in order to reference EN 16733 for the continuous smouldering combustion;
c) the reaction to fire class "F" in Annex A;
d) the new Annex ZA;
e) editorial changes.
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés à base de laines minérales (MW) - Spécification
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz mineralne volne (MW) - Specifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2019
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz mineralne volne (MW) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made mineral wool (MW) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Mineralwolle (MW) -
Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Produits manufacturés à base de laines minérales (MW) - Spécification
Ta slovenski standard je istoveten z: EN 14303:2015/prA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 14303:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2018
ICS 91.100.60
English Version
Thermal insulation products for building equipment and
industrial installations - Factory made mineral wool (MW)
products - Specification
Produits isolants thermiques pour l'équipement du Wärmedämmstoffe für die technische
bâtiment et les installations industrielles - Produits Gebäudeausrüstung und für betriebstechnische
manufacturés à base de laines minérales (MW) - Anlagen in der Industrie - Werkmäßig hergestellte
Spécification Produkte aus Mineralwolle (MW) - Spezifikation
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.
This draft amendment A1, if approved, will modify the European Standard EN 14303:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14303:2015/prA1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modifications to the Scope . 4
3 Modifications to Clause 2," Normative references" . 4
4 Modifications to 3.1.2, "Additional terms and definitions" . 4
5 Modification to 3.2.1, "Symbols and units used in this standard" . 4
6 Modifications to 3.2.2, "Abbreviated terms used in this standard" . 4
7 Modification to Clause 4, "Requirements" . 5
8 Modification to 4.1, "General" . 5
9 Modification to 4.2.1, "Thermal conductivity". 5
10 Modification to 4.2.4, "Reaction to fire of the product as placed on the market" . 5
11 Modification to 4.3.1, "General" . 5
12 Modification to 4.3.8, "Water vapour transmission" . 5
13 Modification to 4.3.9, "Release of dangerous substances" . 5
14 Modifications to 4.3.10, "Continuous glowing combustion" . 5
15 Modification to 5.3, "Testing" . 7
16 Modification to 5.3.2, "Thermal conductivity". 7
17 Modification to Clause 6, "Designation code" . 7
18 Modifications to Clause 7, "Assessment and verification of constancy of performance
— AVCP" . 7
19 Modifications to Clause 8, "Marking and labelling" . 8
20 Modification to Annex A, "Factory production control" . 9
21 Modification to Annex B, "Additional properties" . 12
22 Modification to Annex ZA . 12
European foreword
This document (EN 14303:2015/prA1:2018) has been prepared by Technical Committee CEN/TC 88
“Thermal insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This amendment modifies EN 14303:2015 identifying those clauses of the standard which are needed
for the compliance of this European Standard with the Construction Products Regulation (CPR).
This amendment introduces:
a) an update for the normative references;
b) an update for 4.3.9 Release of dangerous substances by referencing EN 16516 and corresponding
adaptions in the document;
c) the adaption of 4.3.10 in order to reference EN 16733 for the continuous smouldering combustion;
d) the reaction to fire class "F" in Annex A;
e) the new Annex ZA;
f) editorial changes.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral
part of this document.
1 Modification to the European foreword
Delete "and supports essential requirements of Regulation (EU) No. 305/2011" from the 7th paragraph.
The European foreword will be updated using the latest template texts and listing the modifications as
described in the foreword of this document.
2 Modifications to the Scope
st
Replace "requirements" with "characteristics" in the 1 paragraph.
Replace "evaluation of conformity" with "assessment and verification of constancy of performance
(AVCP)" in the 4th paragraph.
Replace "declared" with “measured” in the 7th paragraph.
Replace "European Standard" with "document" in the whole Scope.
3 Modifications to Clause 2," Normative references"
Replace the reference to EN 12086 with the reference to:
"EN ISO 12572, Hygrothermal performance of building materials and products – Determination of water
vapour transmission properties – Cup method (ISO 12572:2016)".
Add the following references:
"EN 16516, Construction products – Assessment of release of dangerous substances – Determination of
emissions into indoor air
EN 16733:2016, Reaction to fire tests for building products – Determination of a building product's
propensity to undergo continuous smouldering".
4 Modifications to 3.1.2, "Additional terms and definitions"
Delete term 3.1.2.3 "level".
Delete term 3.1.2.4 "class".
Renumber the other terms accordingly.
5 Modification to 3.2.1, "Symbols and units used in this standard"
Add the following:
"
S – NoS is the symbol of the declared continuous smouldering performance (NoS means no
Smouldering and S means Smouldering)
ANP is the symbol of the declared continuous smouldering performance when the
assessment is not possible
".
6 Modifications to 3.2.2, "Abbreviated terms used in this standard"
Delete the abbreviations "PTD" and "VCP" and their explanations.
Add:
"
CWFT is Classification without further testing
"
7 Modification to Clause 4, "Requirements"
Replace the title of Clause 4 with the following: "Characteristics".
8 Modification to 4.1, "General"
Delete the second sentence from the first paragraph.
9 Modification to 4.2.1, "Thermal conductivity"
Delete "by the manufacturer" from the 2nd paragraph (two times).
10 Modification to 4.2.4, "Reaction to fire of the product as placed on the market"
Replace the last paragraph with the following:
"Reaction to fire class A1 without further test is declared when it is demonstrated by testing in
accordance with EN 13820 that the products do not contain more than 1,0 % by weight or volume
(whichever is the more onerous) of organic matter.
NOTE 2 The European Commission Decision 96/603/EC amended by Decision 2000/605/EC and
2003/424/EC gives the conditions for classification A1 without the need for testing.".
11 Modification to 4.3.1, "General"
Delete "by the manufacturer".
12 Modification to 4.3.8, "Water vapour transmission"
Replace the reference to "EN 12086" with a reference to "EN ISO 12572".
13 Modification to 4.3.9, "Release of dangerous substances"
Replace the paragraphs and the NOTE with the following:
1)
"If declared, the release of dangerous substances into indoor air shall be tested according to
EN 16516.
NOTE An informative database covering European and national provisions on dangerous substances is
available at the Growth website on EUROPA accessed through: http://ec.europa.eu/growth/tools-databases/cp-
ds/.".
14 Modifications to 4.3.10, "Continuous glowing combustion"
Replace the title of 4.3.10 with the following: "Propensity to undergo continuous smouldering".
1) See for reference the LCI list of the European Commission "Agreed EU-LCI values"
(http://ec.europa.eu/growth/sectors/construction/eu-lci/values_en)
Replace the paragraphs and the NOTE with the following:
"When declared, the propensity to undergo continuous smouldering of factory made mineral wool
(MW) products shall be tested according to EN 16733.
The following conditions and parameters shall be considered within the tests:
— the type of binder and additives;
— organic content (in percentage per mass), to be determined by tests according to EN 13820;
— absolute organic content expressed in [kg/m ];
— density according to EN 1602 for flat products, according to EN 13470 for preformed pipe
insulation;
— thickness to be determined by test according to EN 823 for flat products or to EN 13467 for
preformed pipe insulation;
— fibre orientation.
Pipe sections shall be tested in a vertical direction, separately from flat products.
The test is intended for naked core products. Any facings or coatings are removed when preparing the
test specimen.
The tests shall be done without consideration of the intended end-use conditions. If EN 16733:2016,
6.2.5 applies, a permanent contact between the pieces shall be assured.
If there are pipe sections with an outer diameter of more than 100 mm, cut sections shall be used for
preparing the test specimen, taken into account the listed parameters.
The results of tests considering the aforementioned parameters in fully are also valid for products:
— of same binder type and additives;
— having tested absolute organic content in [kg/m ] identical or lower, when the organic content in
[%] is the same or lower as tested
— with equal or lower density up to a tested density of 115 kg/m ;
— if tested density is higher than 115 kg/m , can be applicable to lower density if additionally tested
with a density of 100 kg/m (± 15 %);
— with lower thickness and also with higher thickness when 100 mm thick specimens were tested;
— with all fibre orientations, if all relevant orientations had been tested;
— with any facings or coatings or suchlike;
— for any end-use conditions.
If the test according to EN 16733:2016, Clause 11 has been passed, declare: “the product does not show
propensity for continuous smouldering combustion”. If the test according to Clause 11 of
EN 16733:2016 has been failed, declare: “the product shows propensity for continuous smouldering
combustion”. If the assessment was not possible according to EN 16733:2016, Clause 11, declare:
“asse
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.