EN 12697-16:2004

Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres

This European Standard describes test methods (method A and method B) for determining abrasion by studded tyres, tested on cylindrical specimens of bituminous mixtures.
NOTE   Method A originates from the 'Prall'-method, which has been improved by comprehensive research work. According to Swedish research work, the method correlates with abrasion in the field. Method B originates from Finnish experience and correlates with abrasion in the field.

Asphalt - Prüfverfahren für Heißasphalt - Teil 16: Abrieb durch Spikereifen

Diese Europäische Norm legt zwei Prüfverfahren (Verfahren A und Verfahren B) für die Bestimmung des von Spikereifen verursachten Abriebs durch Prüfung von zylindrischen Probekörpern aus Asphalt fest.
ANMERKUNG   Verfahren A ist vom "Prall"-Verfahren abgeleitet, das durch umfassende Forschungsarbeiten verbessert wurde. Aufgrund schwedischer Forschungsarbeiten korreliert das Verfahren mit dem Abrieb in der Praxis. Verfahren B basiert auf finnischen Versuchen und korreliert mit dem Abrieb in der Praxis.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 16: Abrasion par pneus à crampons

La présente norme décrit deux modes opératoires (méthode A et méthode B) pour la préparation et la détermination de l'abrasion provoquée par des pneus à crampons, dont l'essai est effectué sur des éprouvettes cylindriques de mélanges bitumineux. NOTE 1 Les deux méthodes (A et B) peuvent être utilisées lorsqu'elles sont appropriées à la détermination de l'abrasion par des pneus à crampons. NOTE 2 La méthode A provient de la méthode "Prall", mais elle est améliorée par des travaux de recherche complets pour obtenir une conception adéquate.

Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 16. del: Obraba zaradi gum ježevk

General Information

• Status: Withdrawn
• Publication Date: 06-Jul-2004
• Withdrawal Date: 05-Apr-2016
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Due Date: 06-Apr-2016
• Completion Date: 06-Apr-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 12697-16:2004 - Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres

Relations

• Replaced By: EN 12697-16:2016 - Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres
• Effective Date: 13-Apr-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 16: Abrieb durch SpikereifenMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 16: Abrasion par pneus a cramponsBituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyres93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-16:2004SIST EN 12697-16:2004en01-september-2004SIST EN 12697-16:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-16July 2004ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part16: Abrasion by studded tyresMélanges bitumineux - Méthodes d'essai pour mélangehydrocarboné à chaud - Partie 16: Abrasion par pneus àcramponsAsphalt - Prüfverfahren für Heißasphalt - Teil 16: Abriebdurch SpikereifenThis European Standard was approved by CEN on 2 March 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-16:2004: ESIST EN 12697-16:2004

Stud chart.15 Annex B (normative)
Spring force measurement.16 B.1 General.16 B.2 Measuring the spring force with spring balance or dynamometer.16 B.2.1 Measuring equipment.16 B.2.2 Procedure and an example.16 Bibliography.18
Part 22: Wheel tracking. EN 12697-23, Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens. EN 12697-24, Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue. prEN 12697-25, Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test. EN 12697-26, Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness. EN 12697-27, Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling. EN 12697-28, Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading. EN 12697-29, Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen. EN 12697-30, Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation, impact compactor. EN 12697-31, Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor. EN 12697-32, Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor. EN 12697-33, Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor. EN 12697-34, Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test. prEN 12697-35, Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing. EN 12697-36, Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement. EN 12697-37, Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA. EN 12697-38, Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration. SIST EN 12697-16:2004

1 Scope This document describes test methods (method A and method B) for determining abrasion by studded tyres, tested on cylindrical specimens of bituminous mixtures. NOTE Method A originates from the ‘Prall’-method, which has been improved by comprehensive research work. According to Swedish research work, the method correlates with abrasion in the field. Method B originates from Finnish experience and correlates with abrasion in the field. 2 Normative references The following referenced documents are indispensible for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12697-6, Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens. EN 12697-27, Bituminous mixtures - Tests methods for hot mix asphalt - Part 27: Sampling. EN 12697-30, Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation, impact compactor. EN 12697-31, Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by
gyratory compactor. EN 12697-32, Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor. EN 12697-33, Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor. ISO 3290, Rolling bearings – Balls - Dimensions and tolerances.
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 abrasion loss of mass by abrasive action, in millilitres (ml) 3.2 precision closeness of agreement between independent test results obtained under stipulated conditions NOTE 1 Precision depends only on the distribution of random errors and does not relate to the true value or the specified value. NOTE 2 The measure of pre
...