EN 500-2:2006

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

Bewegliche Straßenbaumaschinen - Sicherheit - Teil 2: Besondere Anforderungen an Straßenfräsen

Dieser Teil von EN 500 enthält die Sicherheitsanforderungen für Straßenfräsen, wie in Abschnitt 3 definiert, und behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf diese Maschinen zutreffen, wenn sie bestimmungsgemäß verwendet werden. Die nach vernünftigem Ermessen für den Hersteller vorhersehbare Nutzung der Maschine außerhalb der bestimmungsgemäßen Verwendung ist ebenfalls berücksichtigt.
Dieser Teil von EN 500 enthält ergänzende Festlegungen zu EN 500-1 Gemeinsame Anforderungen.

Machines mobiles pour la construction de routes - Sécurité - Partie 2 : Prescriptions spécifiques pour fraiseuses routières

Premični stroji za gradnjo cest - Varnost - 2. del: Posebne zahteve za stroje za rezkanje cestišča

General Information

• Status: Withdrawn
• Publication Date: 10-Oct-2006
• Withdrawal Date: 21-Oct-2008
• ICS: 93.080.10 - Road construction
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 5 - Road construction machines - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Oct-2008
• Completion Date: 22-Oct-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN 500-2:2007 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

Relations

• Replaces: EN 500-2:1995 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
• Effective Date: 22-Dec-2008
• Merged Into: EN 500-2:2006+A1:2008 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bewegliche Straßenbaumaschinen - Sicherheit - Teil 2: Besondere Anforderungen an StraßenfräsenMachines mobiles pour la construction de routes - Sécurité - Partie 2 : Prescriptions spécifiques pour fraiseuses routieresMobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines93.080.10Gradnja cestRoad constructionICS:Ta slovenski standard je istoveten z:EN 500-2:2006SIST EN 500-2:2007en01-januar-2007SIST EN 500-2:2007SLOVENSKI
STANDARDSIST EN 500-2:20001DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 500-2October 2006ICS 91.220Supersedes EN 500-2:1995
English VersionMobile road construction machinery - Safety - Part 2: Specificrequirements for road-milling machinesMachines mobiles pour la construction de routes - Sécurité- Partie 2 : Prescriptions spécifiques pour fraiseusesroutièresBewegliche Straßenbaumaschinen - Sicherheit - Teil 2:Besondere Anforderungen an StraßenfräsenThis European Standard was approved by CEN on 17 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 500-2:2006: ESIST EN 500-2:2007

Noise test code for road-milling machines.12 Annex B (informative)
Examples of road-milling machines.17 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EC Directive 98/37/EC.19 Bibliography.20
Figures Figure 1 — Milling equipment.9 Figure 2 — Warning sign.10 Figure A.1 — Basic length L.13 Figure A.2 — Microphone positions.13 SIST EN 500-2:2007

1 Scope This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 ”Common requirements”. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 500-1:2006, Mobile road construction machinery — Safety — Part 1: Common requirements EN 811:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the lower limbs EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 61310-1:1995, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995) EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic termi-nology, methodology (ISO 12100-1:2003) SIST EN 500-2:2007

5 Safety requirements and/or protective measures 5.1 Lighting, signalling and marking lights and reflex-reflector devices 5.2 of EN 500-1:2006 applies. 5.2 Operation and handling 5.3 of EN 500-1:2006 applies with the following addition:  to minimise the risk of dust, appropriate provisions (e.g. a water sprinkling system) shall be made. 5.3 Operator's station 5.4 of EN 500-1:2006 applies. with the following exception: 5.4.2 of EN 500-1:2006, first paragraph, does not apply for road-milling machines. 5.4 Operator's seat 5.5 of EN 500-1:2006 applies. 5.5 Controls and indicators 5.6 of EN 500-1:2006 applies. SIST EN 500-2:2007

EN
...