EN 13473-2:2001
(Main)Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements
This Part 2 of EN 13473 defines the test methods to be used to determine the designated and specified properties given in Parts 1 and 3 respectively.
Part 2 of EN 13473 defines the general requirements applicable to the specification of all types of multi-axial multi-ply fabrics falling within the scope of this specification as defined in Part 1 of this standard.
Verstärkungen - Spezifikation für Multiaxialgelege - Teil 2: Prüfverfahren und allgemeine Produktanforderungen
Anwendungsbereich
Diese Norm definiert die Prüfverfahren, die zur Bestimmung der in Tei l1 und Teil3 festgelegten Eigenschaften
angewendet werden müssen.
Teil 2 der EN 13473 definiert die allgemeinen Anforderungen und ist auf alle Typen von Multiaxialgelegen
anzuwenden, die in den Anwendungsbereich des Teiles 1 dieser Norm fallen.
Renfort - Spécifications pour les tissus multi-axiaux multicouches - Partie 2: Méthodes d'essai et exigences générales
Domaine d'application
Cette partie 2 de l'EN 13473 définit les méthodes d'essai à utiliser pour déterminer les caractéristiques de désignation et de spécification données respectivement dans les parties 1 et 3.
Cette partie 2 de l'EN 13473 définit les exigences générales applicables aux spécifications de tous les types de tissus multicouches multi-axiaux inclus dans le domaine d'application de cette spécification et définis dans la partie 1 de la Norme.
Ojačitve - Specifikacije za večosne večplastne tkanine - 2. del: Metode preskušanja in splošne zahteve
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verstärkungen - Spezifikation für Multiaxialgelege - Teil 2: Prüfverfahren und allgemeine ProduktanforderungenRenfort - Spécifications pour les tissus multi-axiaux multicouches - Partie 2: Méthodes d'essai et exigences généralesReinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements83.120Reinforced plastics59.100.99NRPSR]LWRYOther materials for the reinforcement of compositesICS:Ta slovenski standard je istoveten z:EN 13473-2:2001SIST EN 13473-2:2002en01-februar-2002SIST EN 13473-2:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13473-2June 2001ICS 59.100.99; 83.120English versionReinforcement - Specifications for multi-axial multi-ply fabrics -Part 2: Methods of test and general requirementsRenfort - Spécifications pour les tissus multi-axiauxmulticouches - Partie 2: Méthodes d'essai et exigencesgénéralesVerstärkungen - Spezifikation für Multiaxialgelege - Teil 2:Prüfverfahren und allgemeine ProduktanforderungenThis European Standard was approved by CEN on 10 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13473-2:2001 ESIST EN 13473-2:2002
Page 2EN 13473-2:2001ContentsPageForeword.31Scope.42Normative references.43Terms and definitions.44List of physical properties.45General requirements.55.1Appearance.55.2Packaging.65.3Labelling.6Bibliography.7SIST EN 13473-2:2002
Page 3EN 13473-2:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 249 "Plastics", the secretariat ofwhich is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latestby December 2001.This standard is one part of EN 13473, «Reinforcement - Specifications for multi-axial multi-ply fabrics» which isconstructed as follows: Part 1: Designation Part 2: Methods of test and general requirements Part 3: Specific requirementsThis standard includes a Bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 13473-2:2002
Page 4EN 13473-2:20011 ScopeThis Part 2 of EN 13473 defines the test methods to be used to determine the designated and specified propertiesgiven in Parts 1 and 3 respectively.Part 2 of EN 13473 defines the general requirements applicable to the specification of all types of multi-axial multi-ply fabrics falling within the scope of this specification as defined in Part 1 of this standard.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative ref
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.