EN 13953:2003+A1:2007

LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

This European Standard specifies the design, testing and marking requirements for spring loaded pressure relief valves, for use in liquefied petroleum gas (LPG) cylinders.
These valves can be either an integral part of a cylinder valve (see EN 13152 and EN 13153) or a separate device.
This European Standard does not exclude the use of other designs of pressure relief devices that provide a similar level of safety.

Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG)

Diese Europäische Norm legt die Konstruktion, Herstellung, Prüfung und Kennzeichnung von handelsüblichen, federbelasteten Sicherheitsventilen fest, die in Flüssiggas-Flaschen eingebaut werden.
Diese Ventile können entweder ein integraler Bestandteil des Flaschenventils (siehe EN 13152 und EN 13153) oder eine eigenständige Einrichtung sein.
Diese Europäische Norm schließt die Verwendung anderer Konstruktionen von Sicherheitsventilen nicht aus, wenn ein vergleichbares Sicherheitsniveau sichergestellt ist.

Equipements pour gaz de pétrole liquéfié et leurs accessoires - Soupapes de sûreté des bouteilles transportables et rechargeables pour gaz de pétrole liquéfié (GPL)

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za ponovno polnljive jeklenke za utekočinjeni naftni plin (UNP)

General Information

• Status: Withdrawn
• Publication Date: 27-Mar-2007
• Withdrawal Date: 03-Mar-2015
• ICS: 23.060.40 - Pressure regulators
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 2 - Design and manufacture of accessories (valves, gauges, fittings) for LPG pressure vessels designed in WG1
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Mar-2015
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13953:2003+A1:2007 - LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

Relations

• Merged From: EN 13953:2003 - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
• Effective Date: 18-Jan-2023
• Replaced By: EN 13953:2015 - LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
• Effective Date: 08-Jun-2022
• Revised: prEN ISO 28622 - Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) (ISO/DIS 28622:2008)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG)Equipements pour gaz de pétrole liquéfié et leurs accessoires - Soupapes de sureté des bouteilles transportables et rechargeables pour gaz de pétrole liquéfié (GPL)LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)23.060.40Pressure regulators23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 13953:2003+A1:2007SIST EN 13953:2003+A1:2007en,fr,de01-september-2007SIST EN 13953:2003+A1:2007SLOVENSKI
STANDARDSIST EN 13953:20031DGRPHãþD



SIST EN 13953:2003+A1:2007



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13953:2003+A1
March 2007 ICS 23.060.40 SupersedesEN 13953:2003English Version
LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
Equipements pour gaz de pétrole liquéfié et leurs accessoires - Soupapes de sûreté des bouteilles transportables et rechargeables pour gaz de pétrole liquéfié (GPL)
Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG) This European Standard was approved by CEN on 21 April 2003 and includes Amendment 1, approved by CEN on 15 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13953:2003+A1:2007: ESIST EN 13953:2003+A1:2007



EN 13953:2003+A1:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms, definitions and abbreviations.4 3.1 Terms and definitions.4 3.2 Abbreviations.6 4 Operating temperatures.6 5 Materials.6 5.1 General.6 5.2 Metallic materials.6 5.3 Non-metallic components.7 5.4 Lubricants, sealants and adhesives.7 6 Design.7 6.1 General.
...