prEN ISO 1120

Conveyor belts - Determination of strength of mechanical fastenings for textile conveyor belts - Static test method (ISO/DIS 1120:2024)

ISO 1120:2012 specifies a static test method for measuring the strength of a conveyor belt mechanical fastening; the mechanical joints can be either of the type employing a connecting rod or of a type which does not employ a connecting rod.

Fördergurte - Bestimmung der Festigkeit mechanischer Verbindungen für Textilfördergurte - Statisches Prüfverfahren (ISO/DIS 1120:2024)

Courroies transporteuses - Détermination de la résistance des assemblages agrafés pour les courroies transporteuses à carcasse textile - Méthode d'essai statique (ISO/DIS 1120:2024)

L'ISO 1120:2012 spécifie une méthode d'essai statique permettant de mesurer la résistance de l'assemblage agrafé d'une courroie transporteuse; il existe deux types d'assemblages mécaniques, avec ou sans jonc d'assemblage.

Naprave za kontinuirni transport - Ugotavljanje trdnosti mehanskih spojev naprave za kontinuirni transport- Statična preskusna metoda (ISO/DIS 1120:2024)

General Information

• Status: Not Published
• Publication Date: 05-Apr-2026
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 03-Dec-2024
• Completion Date: 03-Dec-2024
• Ref Project: oSIST prEN ISO 1120:2024 - Conveyor belts - Determination of strength of mechanical fastenings for textile conveyor belts - Static test method (ISO/DIS 1120:2024)

Relations

• Revises: EN ISO 1120:2012 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)
• Effective Date: 13-Dec-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2024
Naprave za kontinuirni transport - Ugotavljanje trdnosti mehanskih spojev
naprave za kontinuirni transport- Statična preskusna metoda (ISO/DIS 1120:2024)
Conveyor belts - Determination of strength of mechanical fastenings for textile conveyor
belts - Static test method (ISO/DIS 1120:2024)
Fördergurte - Bestimmung der Festigkeit mechanischer Verbindungen für
Textilfördergurte - Statisches Prüfverfahren (ISO/DIS 1120:2024)
Courroies transporteuses - Détermination de la résistance des assemblages agrafés
pour les courroies transporteuses à carcasse textile - Méthode d'essai statique (ISO/DIS
1120:2024)
Ta slovenski standard je istoveten z: prEN ISO 1120
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 1120
ISO/TC 41/SC 3
Conveyor belts — Determination of
Secretariat: SAC
strength of mechanical fastenings
Voting begins on:
for textile conveyor belts— Static
2024-09-10
test method
Voting terminates on:
ICS: 53.040.20
2024-12-03
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 1120:2024(en)
DRAFT
ISO/DIS 1120:2024(en)
International
Standard
ISO/DIS 1120
ISO/TC 41/SC 3
Conveyor belts — Determination of
Secretariat: SAC
strength of mechanical fastenings
Voting begins on:
for textile conveyor belts— Static
test method
Voting terminates on:
ICS: 53.040.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 1120:2024(en)
ii
ISO/DIS 1120:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test piece . 2
6.1 Selection of test piece .2
6.2 Shape, dimensions and preparation .2
6.2.1 Mechanical fastenings with connecting rod .2
6.2.2 Mechanical fastenings without connecting rod .3
6.2.3 Overall width of fastening/number of fastener plates .3
6.3 Number of test pieces .3
6.4 Conditioning and test conditions .3
7 Procedure . 3
7.1 For mechanical fastenings with a connecting rod .3
7.2 For mechanical fastenings without a connecting rod .3
8 Expression of results . 4
9 Test report . 5
Bibliography . 6

iii
ISO/DIS 1120:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those inten
...