Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning and maintenance

This European standard specifies oxygen reduction systems that are used as fire prevention systems by creating an atmosphere in an area which is having a lower permanent oxygen concentration as in ambient conditions. The level of oxygen reduction is defined by the individual risks of these areas (see Annex A). Oxygen reduction is achieved by technical systems which are providing a flux of air containing a reduced concentration of oxygen.
This European standard specifies minimum requirements and defines the specifications governing the design, installation and maintenance of fixed oxygen reduction systems with oxygen reduced air in buildings and industrial production plants. The standard also applies to the extension and modification of existing systems.
This European standard applies to oxygen reduction systems using nitrogen which are designed for continual oxygen reduction in enclosed spaces.
NOTE   Nitrogen is today the most suitable gas to be used for oxygen reduction. For other gases this European standard can be used as basis.
This European standard does not apply to oxygen reduction systems that use water mist or combustion gases.
The European standard does not apply to:
-   explosion suppression systems;
-   explosion prevention systems;
-   fire extinguishing systems using gaseous extinguishing agents;
-   inertization of portable containers;
-   systems in which oxygen levels are reduced for reasons other than fire prevention (e.g. steel processing in the presence of inert gas to avoid the formation of oxide film);
-   inerting required during repair work on systems or equipment (e.g. welding) in order to eliminate the risk of fire or explosion.
In addition to the conditions for the actual oxygen reduction system and its individual components this European standard also covers certain structural specifications for the protected area.
The space protected by an oxygen reduction system is a controlled and continuously monitored indoor climate for extended occupation. This standard does not cover unventilated confined spaces that may contain hazardous gases.

Ortsfeste Löschanlagen - Sauerstoffreduktionsanlagen - Auslegung, Einbau, Planung und Instandhaltung

Diese Europäische Norm legt Anforderungen an die Sauerstoffreduktionsanlagen fest, die als Brandvermeidungsanlagen verwendet werden, indem in einem Bereich eine Atmosphäre erzeugt wird, die eine niedrigere ständige Sauerstoffkonzentration aufweist als unter Umgebungsbedingungen. Der Grad der Sauerstoffreduktion ist durch die einzelnen Brandrisiken, die in diesen Bereichen vorherrschen, festgelegt (siehe Anhang A). Die Sauerstoffreduktion wird durch technische Systeme erreicht, die einen Volumenstrom sauerstoffreduzierter Luft erzeugen.
Diese Europäische Norm legt die Mindestanforderungen an die Auslegung, den Einbau und die Instandhaltung von ortsfesten Sauerstoffreduktionsanlagen mit sauerstoffreduzierter Luft in Gebäuden und Industrieanlagen fest und enthält die diesbezüglichen Festlegungen. Die Norm gilt auch für die Erweiterung und Änderung bereits vorhandener Anlagen.
Diese Europäische Norm gilt für Sauerstoffreduktionsanlagen mit Stickstoff zur kontinuierlichen Sauerstoffreduktion in umschlossenen Räumen.
ANMERKUNG   Stickstoff ist gegenwärtig das geeignetste Gas für die Sauerstoffreduktion. Bezüglich weiterer Gase kann diese Europäische Norm als Grundlage dienen.
Diese Europäische Norm gilt nicht für Sauerstoffreduktionsanlagen, die Wassernebel oder Verbrennungsgase verwenden.
Diese Europäische Norm gilt nicht für:
   Explosionsunterdrückungsanlagen;
   Explosionsschutzanlagen;
   Feuerlöschanlagen mit gasförmigen Feuerlöschmitteln;
   die Inertisierung tragbarer Behälter;
   Anlagen, bei denen der Sauerstoffgehalt aus anderen Gründen als der Brandvermeidung reduziert wird (z. B. Stahlverarbeitung unter Inertgas zur Vermeidung der Bildung einer Oxidschicht);
   die Inertisierung, die bei Reparaturarbeiten von Anlagen oder  Apparaturen (z. B. Schweißen) zur Vermeidung der Brand- oder Explosionsgefahr erforderlich ist.
Neben den Vorgaben für die eigentliche Sauerstoffreduktionsanlage und ihre einzelnen Bauteile behandelt die vorliegende Europäische Norm auch bestimmte bauliche Anforderungen an den Schutzbereich.
Der von einer Sauerstoffreduktionsanlage geschützte Bereich ist ein geregeltes und ständig überwachtes Innenraumklima für längere Nutzung. Diese Norm behandelt keine unbelüfteten engen Räume, in denen sich gefährliche Gase befinden können.

Installations fixes de lutte contre l'incendie - Systèmes d'appauvrissement en oxygène - Conception, installation, planification et maintenance

La présente Norme européenne spécifie les systèmes d’appauvrissement en oxygène qui sont utilisés comme systèmes de prévention incendie en créant, dans les zones protégées, une atmosphère dans laquelle la concentration en oxygène est réduite en permanence par rapport aux conditions ambiantes. Le niveau d’appauvrissement en oxygène est défini par les risques individuels identifiés dans les zones protégées (voir l’Annexe A). L’appauvrissement en oxygène est obtenu au moyen de systèmes qui fournissent un flux d’air ayant une concentration réduite en oxygène.
La présente Norme européenne spécifie les exigences minimales et définit les spécifications régissant la conception, l’installation et la maintenance des systèmes fixes d’appauvrissement en oxygène dans des bâtiments et dans des usines de production industrielle fonctionnant sous air appauvri en oxygène. La norme s’applique également à l’extension et à la modification des systèmes existants.
La présente Norme européenne s’applique aux systèmes d’appauvrissement en oxygène utilisant de l’azote, qui sont conçus pour assurer un appauvrissement continu en oxygène dans des espaces clos.
NOTE   L’azote est à l’heure actuelle le gaz le mieux adapté pour réaliser un appauvrissement en oxygène. Pour les autres gaz, la présente Norme européenne peut être utilisée comme base.
La présente Norme européenne ne s’applique pas aux systèmes d’appauvrissement en oxygène comme le brouillard d’eau ou les systèmes d’extinction gaz.
La présente Norme européenne ne s’applique pas :
-   aux systèmes anti-explosion ;
-   aux systèmes de prévention des explosions ;
-   aux systèmes d’extinction d’incendie utilisant des agents extincteurs gazeux ;
-   à l’inertage des réservoirs portatifs ;
-   aux systèmes dans lesquels les niveaux d’oxygène sont réduits pour des raisons autres que la prévention incendie (par exemple, transformation de l’acier en présence de gaz inerte pour éviter la formation d’un film d’oxyde) ;
-   à l’inertage nécessaire pendant les travaux de réparation des systèmes ou de l’équipement (par exemple, soudage) afin d’éliminer le risque d’incendie ou d’explosion.
En plus des conditions qui s’appliquent au système d’appauvrissement en oxygène proprement dit et à ses composants individuels, la présente Norme européenne couvre également certaines spécifications structurelles relatives à la zone protégée.
Un espace protégé par un système d’appauvrissement en oxygène est une zone à l’intérieur d’un bâtiment dont l’environnement est contrôlé en continu pour permettre une occupation prolongée. A contrario, la présente norme ne concerne pas les espaces confinés non ventilés susceptibles de contenir des gaz dangereux.

Vgrajeni gasilni sistemi - Sistemi z zmanjšano koncentracijo kisika - Projektiranje, vgradnja, načrtovanje in vzdrževanje

General Information

Status
Published
Publication Date
18-Aug-2020
Withdrawal Date
27-Feb-2021
Current Stage

Relations

Buy Standard

Standard
EN 16750:2017+A1:2020 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16750:2017+A1:2020
01-november-2020
Nadomešča:
SIST EN 16750:2017
Vgrajeni gasilni sistemi - Sistemi z zmanjšano koncentracijo kisika - Projektiranje,
vgradnja, načrtovanje in vzdrževanje
Fixed firefighting systems - Oxygen reduction systems - Design, installation, planning
and maintenance
Ortsfeste Löschanlagen - Sauerstoffreduktionsanlagen - Auslegung, Einbau, Planung
und Instandhaltung
Installations fixes de lutte contre l'incendie - Systèmes d'appauvrissement en oxygène -
Conception, installation, planification et maintenance
Ta slovenski standard je istoveten z: EN 16750:2017+A1:2020
ICS:
13.220.10 Gašenje požara Fire-fighting
SIST EN 16750:2017+A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16750:2017+A1:2020

---------------------- Page: 2 ----------------------
SIST EN 16750:2017+A1:2020


EN 16750:2017+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 13.220.20 Supersedes EN 16750:2017
English Version

Fixed firefighting systems - Oxygen reduction systems -
Design, installation, planning and maintenance
Installations fixes de lutte contre l'incendie - Systèmes Ortsfeste Löschanlagen - Sauerstoffreduktionsanlagen -
d'appauvrissement en oxygène - Conception, Auslegung, Einbau, Planung und Instandhaltung
installation, planification et maintenance
This European Standard was approved by CEN on 9 July 2017 and includes Amendment 1 approved by CEN on 12 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16750:2017+A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16750:2017+A1:2020
EN 16750:2017+A1:2020 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 System requirements . 9
4.1 General . 9
4.2 Personnel safety . 9
4.3 Effectiveness and application . 10
4.4 Alarm organization and emergency plan . 10
5 Design . 10
5.1 Qualification of the des
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.